KUMA ABS Low Profile Trays from ErgoVerse offer a low 0.375" thick profile that permits individuals to position their keyboard and mouse for optimal ergonomics.Constructed of durable ABS plastic, this simple design also eliminates any uncomfortable obstructions on the underside of the tray. When placed on the KUMA ABS Plastic Low Profile Tray, especially one installed on a keyboard arm equipped with a slim mounting bracket (such as the Ovation Low Profile Leverless Arm) a keyboard and pointing device can be comfortably positioned just above the legs, and/or at a negative incline (tilted down) without restricting movement of the knees or thighs.

Note: To be sure this tray will fit an existing keyboard arm, please compare the mounting hole pattern on the installed arm with the Mounting Hole Pattern on the diagram.

The simple, clean design of the KUMA ABS Low Profile Tray is also free of obstructions on its upper surface, (such as raised edges or built-in wrist rests) that could increase the risk of injury to the sensitive pressure points on the underside of the wrists. The rear edge is raised to keep the keyboard in place when the tray is at a negative incline, and is notched in two places to accommodate cable routing.

Composed of rigid ABS Plastic, and 11 inches deep (from front to back), the KUMA ABS Low Profile Trays can accommodate specialty ergonomic keyboards (including adjustable or separated keyboards). These trays are currently available in widths of 30" & 27", with the 30" wide model wide enough for practically all keyboards and pointing devices.

At only 0.375" thick, the ABS Low Profile Tray from Fox Bay Industries encourages individuals to find the most beneficial position for the keyboard without having to accommodate uncomfortable obstructions beneath the tray. When placed on the ABS Plastic Low Profile Tray, especially one installed on a keyboard arm with a similarly slim mounting bracket (such as the Ovation Low Profile Leverless Arm) a keyboard can be comfortably positioned at thigh level, and/or at a negative incline (tilted down) without restricting movement of the knees or thighs.

Note: To be sure this tray will fit an existing keyboard arm, please compare the mounting hole pattern on the installed arm with the Mounting Hole Pattern on the diagram.

The simple, clean design of the ABS Low Profile Tray is also free of obstructions on its upper surface, (such as raised edges or built-in wrist rests) that could increase the risk of injury to the sensitive pressure points on the underside of the wrists. The rear edge is raised to keep the keyboard in place when the tray is at a negative incline, and is notched in two places to route cables.

Composed of rigid ABS Plastic, and eleven inches deep (from front to back), the ABS Low Profile tray can accommodate specialty ergonomic keyboards (including adjustable or separated keyboards). The tray is available in widths of 30", 27", 24", 22", 20" and 18", with the 30" tray large enough for practically all keyboards and pointing devices.

À seulement 0.375 po d`épais, le ABS Low Profile Tray de Fox Bay Industries permet l`utilisateur de trouver une position la plus avantageux pour le clavier sans d`adapter aux obstructions inconfortables dessous la tablette. Lorsque le clavier est mise sur le ABS Low Profile Tray, surtout si installer sur un bras de clavier avec un support de montage mince semblable (comme sur l`Ovation Low Profile Leverless Arm), un clavier peut être mise dans une position confortable au niveau des cuisses, ou/et sur une pente négative (pencher vers le bas) sans réduire le mouvement des genoux ou cuisses.

Veuillez noter: Pour garantire cette tablette soit compatible avec un bras de clavier présent, s`il vous plaît comparez le schéma de trou de montage sur le bras déjà installer avec le schéma de trou de montage sur le diagramme.

Le concept simple et propre du ABS Low Profile Tray est aussi libre de toute obstruction sur la surface supérieure, (tel que les bords surélevés ou des reposes-poignets intégrés) qui peuvent augementer le risque de blessures sur les points de pression sensibles sur le dessous des poignets. Le bord derrière est surélevé pour garder le clavier en place quand la tablette est sur une pente négative, et est dentelé en deux places pour faire passer les câbles.

Composé en plastique ABS, et onze pouces de profondeur (devant-à-derrière), le ABS Low Profile tray peut répondre au bessoins des claviers ergonomiques spécialités (qui inclus des claviers ajustables ou des claviers séparés). La tablette est disponible en largeurs de 30 po, 27 po, 24 po, 22 po, 20 po, et 18 po, avec la tablette de 30 po qui est assez grand pour pratiquement n`importe clavier et n`importe dispositif de pointages.

The Low Profile Tray from Fox Bay Industries is now available in a Phenolic Resin version in addition to the well-known ABS Plastic model. The phenolic material provides a more rigid surface than ABS Plastic and at 0.25" is even thinner than the ABS Plastic Low Profile Tray. When placed on this tray, especially one installed on a keyboard arm with a similarly low profile mounting bracket, a keyboard can be comfortably positioned at thigh level, and/or at a negative incline (tilted down) without restricting movement of the knees or thighs.

Note:The Phenolic Low Profile Tray is pre-drilled to fit any model of the Ovation Low Profile Leverless Arm. However, it may also be possible to fit this to existing arms. To determine whether this tray will fit other keyboard arms, please compare the mounting hole pattern on the installed arm with the Mounting Hole Pattern on the diagram.

The simple, clean design of the Phenolic Low Profile Tray is also free of obstructions on its upper surface, (such as raised edges or built-in wrist rests) that could increase the risk of injury to the sensitive pressure points on the underside of the wrists. The rear edge has a 1" raised Keyboard Guard to keep the keyboard in place when the tray is at a negative incline, and which features innovative cable routing guides on both the left and right.

The Phenolic Low Profile Tray is available in 24" and 27" widths. At 11" deep, both models can comfortably accommodate the space requirements of most mice.

Note:Trays such as the Phenolic Extra-Deep Low Profile Tray and the Extra-Deep ABS Plastic Low Profile Tray, also by Fox Bay Industries, are better suited for central pointing devices.

The KOCHAB Articulating Keyboard Kit by ErgoVerse offers basic keyboard height and tilt adjustability for the budget conscious. The affordability of the KOCHAB makes it an ideal solution for locations where ergonomics are still important but where 1) adjustment will be occasional, 2) full keyboard tray storage is not required, and 3) cost is a factor.

The simple design means that height and angle adjustments are accomplished simultaneously with a single release. One hand is employed to release or tighten the large, easily locked knob while the other hand moves the keyboard tray to the desired height and angle.

The KOCHAB offers 5.3" of elevation adjustment below the work surface and 9" of storage travel along a 17" track. A full 360° swivel accommodates situations where alternative mounting (such as lateral) may be needed and heavy-duty steel construction throughout ensures a stable keyboard surface. The 27" wide x 11" deep coated MDF keyboard tray offers sufficient room for the largest of keyboards and a mouse. Some assembly is required.

Le KOCHAB Articulating Keyboard Kit d'ErgoVerse offre la hauteur et une inclinaison général pour ajuster le clavier, une solution économique. Le coûx bas du KOCHAB est une solution idéale pour les endroits où l'ergonomie est toujours importante mais où 1) l'ajustement sera occasionnel, 2) le ranger au complet de la tablette n`est pas nécessaire, et 3) le coût est un facteur.

La conception simple signifie que les changements de hauteur et d'angle sont accomplis en même temps avec un seul ajustement. Avec une main, facilement libérer ou serrer le grand bouton, tandis que l'autre main déplacer la tablette à la hauteur et à l'angle désirés.

Le KOCHAB offre un ajustement de 5.3po en dessous du bureau et une course de 9po de distance pour ranger sur la glissère/track de 17po. Un pivot complet de 360 ° convient aux situations où un montage alternatif (latéral) peut être nécessaire. Une construction en acier robuste assure une surface de clavier stable. La tablette de clavier MDF est 27po de largeur et 11po de profondeur qui offre suffisamment d'espace pour le plus grand des claviers et une souris. Un peut d`installation est nécessaire.

At thirteen inches deep, the Extra-Deep ABS Low Profile Tray from Fox Bay Industries is 4" deeper (from front to back) than most standard keyboard trays and was designed to accommodate central pointing devices. The extra depth provides plenty of space for these alternative input devices to be fully supported when properly positioned in front of a standard or specialty ergonomic keyboard.

The Extra-Deep ABS Low Profile Tray is available in widths of 30", 27", and 24". All trays are equipped with a 1" raised Keyboard Guard which features cable routing notches on the left and right. The 30" wide tray has plenty of room for an additional mouse, track pad, numeric keypad or even a notepad to be placed on either side of the keyboard and central pointing device. The 27" and 24" inch models offer less extra space but serve well where the workstation has limitations on the width of tray that can be accommodated.

Note: "In order for the tray to be fully stored underneath the desk it must be mounted on a keyboard arm with a 28" track. (A suitable option would be the Extended Track Ovation Low Profile Leverless Arm - Model: 8624D28). If there is insufficient depth beneath the desk top to accommodate a 28" track the Extra-Deep ABS Low Profile Tray can also be mounted to a standard length (23") arm, such as the 8624D23. Be aware, however, that shorter track models will not permit the tray to recess fully beneath the desk, even when fully retracted.

Note: To be sure this tray will fit an existing keyboard arm, please compare the mounting hole pattern on the installed arm with the Mounting Hole Pattern on the diagram.

The Desk Clamp Keyboard Trays from Aidata are simple and economic solutions for situations where a temporary or occasional use keyboard tray is required. Whether there is a need to improve the ergonomics of an improvised workstation, such as when working from home, or to even just quickly and temporarily adapt an existing worksurface that is too high for an individual, the Desk Clamp Keyboard Trays will ably meet the need. Constructed of high impact plastic these trays provide a rigid surface for both keyboard and mouse. They attach directly to the front of desk surfaces (up to 1.57" thick) and require 32" of open space for mounting. Sturdy steel clamp brackets (requiring 2.25" of surface) secure the trays firmly in place and glide rails in the underside of the tray permit virtually complete storage. On the single height version (KB-1010) the tray is positioned 4.25" below the surface of the desk or table and on a 1.5" thick surface will have approximately 2.75" of clearance between the underside of the desk top and the keyboard tray. The KB-3010 can be configured to 3 different fixed heights, 3.625", 4.375", and 5.125" below the surface, making it suitable for a wider range of individuals or for mobile applications where mounting surface heights may vary. If needed, changing the height can be done in a couple of minutes with a simple screwdriver. With both models, thinner desk tops will offer a correspondingly greater clearance.

The Desk Clamp Keyboard Tray surface is 27.5" wide and offers a 10.5" depth of flat surface for keyboard and mouse. The front 1.25" is an ergonomic "waterfall" edge designed to reduce the risk of pressure against the underside of the wrist. The rear of the tray has a low ridge to keep both keyboard and mouse from sliding off the rear of the tray. When stored about 1" of the front lip extends forward of the desk surface.

With a weight of just 5 lbs these trays are ideal for situations where an individual is traveling to workplaces that may not offer a keyboard tray but where the desk surface is too high to ensure proper ergonomics. Once initial assembly (less than 5 minutes) is completed, the tray can be attached and removed in under a minute and will not mark the existing desk surface.
Note: This is not suitable for attachment to glass surfaces as pressure from the clamp brackets could potentially cause the glass to break.

If regular adjustment of keyboard tray height or angle is required, or if the workstation is to be more permanent a heavy-duty Keyboard Tray System may be a more suitable option.

Le Desk Clamp Keyboard Tray d'Aidata est une solution simple et économique pour les situations dans lesquelles l'utilization d'une tablette/plateau de clavier (keyboard tray) est temporaire ou occasionnel. Qu'il s'agisse d'améliorer l'ergonomie d'un poste de travail improvisé, comme dans le cas du travail à la maison, ou d'adapter rapidement et temporairement une surface de travail existante qui est trop haute pour une personne, les Desk Clamp Keyboard Trays répondront parfaitement à ce besoin. Construit en plastique résistant aux chocs, la tablette offre une surface rigide pour le clavier et la souris. Ils se fixent directement à l’avant du bureau (jusqu'à 1.57po d'épaisseur) et ont besoin d'un espace libre de 32po pour fixer. Des supports en acier robustes (qui ont besoin de 2.25po de surface) fixent la tablette solidement en place et des glissières à l’intérieur la permet d'être ranger pratiquement au complete. La tablette qui a un seul hauteur (modèle KB-1010) est positionnée à 4.25po en dessous de la surface du bureau ou table. Elle est 1.5po épaisse, qui permet environ 2.75po d'espace entre le dessous du bureau et la tablette. Le KB-3010 peut être configuré à 3 hauteurs fixes différentes, 3.62po, 4.38po et 5.13po dessous la surface, ce qui le rend compatible à un plus grand nombre de personnes ou à des applications mobiles où la hauteur des surfaces de montage peut varier. Si nécessaire, le changement de hauteur peut être fait en quelques minutes à l'aide d'un simple tournevis. Avec les deux modèles, les bureaux qui sont plus mince offrent encore plus d'espace.

Le Desk Clamp Keyboard Tray est de 27.5po de large et offre une profondeur de 10.5po de surface pour clavier et souris. Le devant 1.25po est un bord ergonomique "en cascade" conçu pour réduire le risque de pression sur le dessous du poignet. L'arrière de la tablette a une arrête basse pour empêcher le clavier et la souris de tomber derrière. Quand la tablette est ranger, elle d'épasse le devant du bureau environ 1po.

Avec un poids de seulement 5 livres, ces tablettes sont des solutions idéales pour les individues qui travaillent aux postes mobiles (voyagent d'un entroit à l'autre) qui n'offrent pas de tablette de clavier, mais où la surface du bureau est trop élevée pour assurer l'ergonomie appropriée. Une fois assemblé (moins de 5 minutes), la tablette peut être fixé et retiré en moins d’une minute et ne marquera pas la surface du bureau existant. Veuillez noter: Cela ne convient pas pour la fixation sur des surfaces en verre. La pression exercée par les supports de serrage pourrait éventuellement craqués le verre.

Si un ajustement régulier de la hauteur ou de l'angle du plateau de clavier est nécessaire, ou si le poste de travail doit être plus permanent, un Keyboard Tray System pour l'usage intensif peut être une option plus appropriée.

The Desk Clamp Tilting Keyboard Tray from Aidata is an economical storable keyboard tray that offers improved ergonomic positioning with positive and negative tilt options in addition to a traditional level position. It is ideal for situations where a temporary or occasional use keyboard tray is required. If there is a need to improve the ergonomics of an improvised workstation, such as when working from home, or to even just quickly and temporarily adapt an existing worksurface, this tray is able to meet the need.

Constructed of high impact plastic, the tray attaches directly to the front of desk surfaces (up to 1.57" thick) and requires 27" of open space for mounting. Sturdy steel clamp brackets (requiring 2.25" of surface depth) secure it firmly in place and glide rails in the underside of the tray allow for almost complete storage. The tray is positioned about 4" below the surface of the desk or table and on a 1" thick surface will have approximately 3" of clearance between the underside of the desk top and the keyboard tray.

The 20-inch wide tray is able to accommodate many central pointing device/keyboard combinations (up to 10.125” in combined depth) or a compact keyboard and traditional mouse. The front 1.25" is an ergonomic bevelled edge designed to reduce the risk of pressure against the underside of the wrist. The rear of the tray has also has a low ridge to keep both keyboard and mouse from sliding off the rear of the tray. When stored about 1" of the front lip extends forward of the desk surface.

With a weight of just 4 lbs these trays are ideal for situations where an individual is traveling to workplaces that may not offer a keyboard tray but where the desk surface is too high to ensure proper ergonomics. Once initial assembly (less than 5 minutes) is completed, the tray can be attached and removed in under a minute and will not mark the existing desk surface.
Note: This is not suitable for attachment to glass surfaces as pressure from the clamp brackets could potentially cause the glass to break.

If regular adjustment of keyboard tray height or angle is required, or if the workstation is to be more permanent a heavy-duty Keyboard Tray System may be a more suitable option.

The Extra-Deep Low Profile Tray from Fox Bay Industries is also available in a Phenolic Resin version in addition to the well-known ABS Plastic model. At just 0.25" thick the Phenolic Extra-Deep Low Profile Tray presents an even lower profile than the ABS version yet provides a surface with even greater rigidity. When placed on this tray, especially one installed on a keyboard arm with a similarly low profile mounting bracket, a keyboard and pointing device can be comfortably positioned at thigh level, and/or at a negative incline (tilted down) without restricting movement of the knees or thighs.

At 13 inches deep, this extra-deep model offers an additional 4 inches of depth when compared to most standard keyboard trays. This extra depth provides plenty of space for central pointing devices to be fully supported when properly positioned in front of a standard or specialty ergonomic keyboard. Available in 24" and 27" widths, this tray is also wide enough to permit workers to gain full benefit from their Adjustable or Separated Keyboards even while using a central pointing device.

The simple, clean design of the Phenolic Extra-Deep Low Profile Tray is also free of obstructions on its upper surface, (such as raised edges or built-in wrist rests) that could increase the risk of injury to the sensitive pressure points on the underside of the wrists. The rear edge has a 1" raised Keyboard Guard to keep the keyboard in place when the tray is at a negative incline, and includes innovative cable routing guides on both the left and right.

Note: This tray must be mounted on a keyboard arm with a 28" track in order to recess completely beneath the desk when it is stored. (A suitable option would be the Extended Track Ovation Low Profile Leverless Arm - Model: 8624D28). If there is insufficient depth beneath the desk top to accommodate a 28" track the Phenolic Extra-Deep Low Profile Tray can also be mounted to a standard length (23") arm, such as the 8624D23. Be aware, however, that shorter track models will not permit the tray to recess fully beneath the desk, even when fully retracted.

Compatibility Note: To ensure that this tray will fit an existing keyboard arm, please compare the mounting hole pattern on the installed arm with the Mounting Hole Pattern on the diagram.

The Under Desk Mouse Tray from Aidata is a convenient storable mousing surface that is easily attached to most desk or table surfaces. The mousing surface sits about 2.2" below the top surface of the desk and at approximately 7.5" in diameter is able to accommodate the space requirements of most conventional mice. The pivoting design means the mouse can be brought out from the desk towards the torso, reducing the need to maintain a forward reach or stretch while using the mouse. This mouse tray can also be of benefit to those who have very limited space for their keyboard by providing an alternate location for the mouse. *For more details on this see the Usage Tips on the Detailed Specifications page.

L'Under Desk Mouse Tray de Aidata est une surface de souris pratique qui se fixe facilement à la plupart des surfaces de bureau ou de table. La surface de la souris se situe à environ 2.2po en dessous de la surface du bureau et, avec un diamètre d'environ 7.5po, elle est capable de répondre aux besoins d'espace de la plupart des souris conventionnelles. Grâce à sa conception pivotante, la souris peut être ramenée du bureau vers le corps, ce qui réduit la nécessité de maintenir une extension vers l'avant ou de s'étirer pendant l'utilisation de la souris. Ce support de souris peut également être utile à ceux qui ont un espace très limité pour leur clavier en fournissant un endroit alternatif pour la souris. *Pour plus de détails, voir les Usage Tips sur la page des spécifications détaillées.

Measuring only 9" deep, the ABS Plastic Low Profile Shallow Tray from Fox Bay Industries is designed for applications where there is limited storage space.At only 0.375" thick, this tray from Fox Bay Industries allows individuals to find the best position for the keyboard without having to accommodate uncomfortable obstructions beneath the tray. A keyboard can be comfortably positioned at thigh level, and/or at a negative incline (tilted down) without restricting movement of the knees or thighs.

The compact 9" depth of this tray requires a full 2" less of storage space than more traditional 11" deep trays, making it an ideal companion for the Tenor Trackless Keyboard Arm or the 17" track version of the Ovation Low Profile Leverless Arm.Due to the intent of this tray being used where space is limited it is only available in a 24" width - sufficient to support most keyboards and a mousing device.

The simple, clean design of the ABS Low Profile Shallow Tray is also free of obstructions on its upper surface, (such as raised edges or built-in wrist rests), that could increase the risk of injury to the sensitive pressure points on the underside of the wrists. The rear edge is raised to keep the keyboard in place when the tray is at a negative incline, and is notched in two places to route cables.

Note: To be sure this tray will fit an existing keyboard arm, please compare the mounting hole pattern on the installed arm with the Mounting Hole Pattern on the diagram.
Note: If more working space is required workers may wish to consider other keyboard trays such as the 11" deep ABS Plastic Low Profile Tray which is available in 27" and 30" widths. This tray will not fully store and will extend at least 2" when used on keyboard arms that do not have sufficiently deep storage tracks.

The Harmony Tray from KV Waterloo incorporates a mousing surface which can be pivoted through an arc toward the body on either the left or right side. The mousing surface easily slides to the right or left as required or can even be fully stored beneath the keyboard. Both left and right positions offer eight forward-angled settings which let the mousing surface be moved through an arc towards the torso, positioning it for the most ergonomic benefit. The ease with which the mousing surface can be re-positioned makes this tray a good selection for someone who has limited width for tray storage (with the mousing surface centered for storage the tray is only 23" wide) but who wishes to spread their mouse use between both left and right hands. The roughly 8" by 9" mousing surface will accommodate most mice but may not be suitable for use with some of the more specialized ergonomic mousing solutions with larger footprints as it has a 1/8" ridge along the side and back edges which limits the possible range of mouse movement.

The Harmony Tray has raised rubber anti-skid pads to prevent the keyboard from moving and is only compatible with keyboards at least 15” in width.

The Harmony Tray is thicker than some other trays due to the inclusion of the sliding mousing surface. As a result it does elevate the keyboard higher off the keyboard arm. Individuals who wish to keep the keyboard and mouse as low as possible without interfering with the movement of the legs may wish to consider other options which present a lower profile.

The Duet Arm Custom Tray from Fox Bay Industries is 12" deep, features a low profile of just 0.375" and is available in widths of 39", 31", 27" and 23". The ABS Plastic tray is fitted with a 1" Keyboard Guard that has convenient cable routing cutouts on both the left and right. It is otherwise free of any obstructions such as raised edges or built-in wrist rests that could increase the risk of injury to the sensitive pressure points on the underside of the wrists.

The Duet Arm Custom Trays are predrilled to fit both the Duet Sit-Stand Arm and the Duet Sit-Stand Storable Arm from KV Waterloo. When paired with these arms the Duet Custom Trays provide durable deeper-than-average rigid work surface which can provide support for virtually any combination of keyboard and mousing input device. The larger 31" and 39" wide trays can even provide space for additional devices or for notetaking.

Note: The Duet Arm Custom Trays are ONLY for use with Duet Arms from KV Waterloo. Mounting holes are pre-drilled for both arm supports as well as the release trigger. Ensure that the arm width matches the width of tray desired.

The Diagonal Big Board Keyboard Tray from Humanscale is designed to be used at corner workstations where the tray needs to be elevated level with or above the desk height. The angled edges at the rear enable the tray to fully clear the edges of the desk when the tray is extended. At 27.5" wide and 11.5" deep, the Diagonal Big Board Tray provides plenty of space for both the keyboard and the mouse. Its symmetrical design allows the mouse to be used comfortably on both the left and right sides. The tray is composed of phenolic, an ultra-strong, remarkably thin (0.25") composite that is non-toxic, durable and easy to clean.

Note: The Diagonal Big Board Keyboard Tray can be mounted to the Ovation Low Profile Leverless Arm.

The Low Profile Tray for Mouse Intensive Users is specifically designed to provide an oversized mousing area for those whose work includes a high degree of mousing, or for those who use a larger mouse or one which is often used with full arm movements (such as the HandShoe Mouse). The dedicated mousing area is 12" wide and 15" deep, enough to even provide a degree of forearm support for some individuals. With 18" of dedicated keyboard space the tray can also comfortably accommodate the widest of keyboards with little or no intrusion into the mousing zone. A 1" high keyboard guard with five cable cutouts for convenient device cable routing is mounted at the back of the tray. This tray is available in models to serve the needs of both right and left handed individuals.

The tray is constructed using phenolic resin ensuring a rigid surface, even at just 0.25" thick. When placed on this tray, especially one installed on a keyboard arm with a similarly low profile mounting bracket, a keyboard and pointing device can be comfortably positioned at thigh level, and/or at a negative incline (tilted down) without restricting movement of the knees or thighs.

NOTE: This tray should be mounted on an Extended Track Ovation Low Profile Leverless Arm in order for it to completely retract under the desk when stored.

If you have an arm already, compare this Hole Pattern to see if this tray can be fitted to your arm.

At 27" wide, by 10.625" deep, the Big Keyboard Tray from Humanscale provides ample space for safely deploying a full-size keyboard and mouse on a single, level surface. When mounted to a height adjustable keyboard arm the Big Keyboard Tray becomes a versatile height- and angle-adjustable workstation accessory that can accommodate workers of all heights.

The Big Keyboard Tray is composed of .25" thick rigid phenolic resin and is equipped with two foam rubber keyboard gripper strips to position the keyboard securely. Integrated 7" wide by 8.25" deep hard-surfaced mousing zones on the right and left sides of the tray enhance its versatility. Raised ridges with cable retention capabilties edge the sides and back of these surfaces to prevent the mouse from falling off. The front edge of the tray can accommodate either of the optional palm rest accessories.

Note: This tray can be mounted to the Ovation Low Profile Leverless Arm.

The 3M Gel Wrist Rest Platform for Keyboard is designed for those who want to reduce wrist extension (i.e. an upward bend at the hand) with its associated risk of injury to the wrist and forearms. This often occurs when working with a conventional keyboard at a seated or standing workstation. The platform is placed directly on the desk surface to provide a base for the keyboard. The gel wrist rest is secured to the platform in front of the keyboard, providing support beneath the heel of the hands to keep the forearms, wrists and hands in comfortable alignment when typing.

Two sets of optional rubber feet are included, and can be attached to the underside of the platform to create either 5° or 10° of negative tilt for the keyboard to provide further insurance against wrist extension.

At 19.5" wide, the platform and wrist rest accommodate standard keyboards with built-in numeric keypads. The gel-filled wrist rest is 0.25" thick, with leatherette cover. The cover has an embedded anti-microbial treatment that inhibits the growth of bacteria.

Note: We are unable to offer our 30 Day Customer Satisfaction Guarantee on this product.

The Heavy Duty Melamine Keyboard Platforms from WorkRite Ergonomics offer high rigidity and durability combined with comfort. The above average thickness of these platforms creates a rigidity that thinner materials cannot provide and the greater mass aids in reducing vibration that can occur with lighter trays. To ensure long life the 5/8" thick melamine platforms are edged with durable PVC trim. The Melamine Keyboard Platforms are also equipped with removable soft leatherette covered foam palm supports for comfort.

This platform is available in three models. The CB180-25 is 19" in width x 11.75" in depth, sufficient in size to accommodate a full-size keyboard or a compact keyboard and a touchpad or trackball (there is not really sufficient space for a standard mouse) or the palm support can be removed and a central pointing device could be deployed with a full-size keyboard. The CB182-25 comes in Black, is 25" in width by 11.75" in depth and is equipped with a mouse guard that can be moved to either side. The CG185-21 is wider at 27" but shallower, just 11" in depth. It does not come with a mouse guard. Both are equipped with the removable full width palm support.
NOTE: These platforms can be mounted on the Ovation Low Profile Leverless Arm or the Ovation Sit-Stand Keyboard Arm

The Prima Keyboard Tray from KV Waterloo is an exceptionally sturdy keyboard tray that incorporates an adjustable mousing surface which can be pivoted toward the user on either the left or right side. The rigid mousing surface easily slides to the right or left as required or can even be fully stored beneath the keyboard. The ease with which the mousing surface can be re-positioned makes this tray a good selection for someone who has limited width for tray storage (with the mousing surface centered for storage the tray is only 19" wide) but who wishes to spread their mouse use between both left and right hands. The roughly 7.5" by 8" mousing surface will accommodate most mice but may not be suitable for use with some of the larger more specialized ergonomic mousing solutions as it has a 1/8" ridge along the rear edge that may limit the possible range of mouse movement.

The Prima Keyboard Tray is equipped with a fairly firm removable palm support, an integrated handle for ease of movement, convenient cable guides for both mouse and keyboard, and a simple flip-up single-page inline document holder

The Prima Tray is thicker than some other trays due to the inclusion of the sliding mousing surface. As a result it does elevate the keyboard higher off the keyboard arm. Users who wish to keep the keyboard and mouse as low as possible without interfering with the movement of the legs may wish to consider other options which present a lower profile.

The HDPE Mini Keyboard Tray from KV Waterloo is ideal for situations where storage space for keyboard and mouse is highly restricted. With a width of just 19.4" and depth of 9.4", the tray is capable of accommodating virtually any keyboard. The rigid 0.5" thick tray is formed from HDPE (High Density Polyethylene) which is fully recyclable and features non-slip strips for secure keyboard placement. The included pivoting mousing surface is formed from 0.25" thick phenolic resin and includes a repositionable mouse guard and cable manager. The 9" diameter mousing surface is positioned 1.34" below the keyboard surface can be mounted to the right or left and pivots below the tray for storage. Included with the Mini Keyboard Tray is a removable gel-feel foam palm rest. The Mini Keyboard Tray features a universal mounting pattern for easy attachment to any KV Waterloo keyboard arm.

The compact dimensions of the HDPE Mini Keyboard Tray make it a perfect companion for the Tenor Trackless Keyboard Arm which was designed for the same highly restrictive space limitations. This combination of products offers the ultimate in compact keyboard storage.

HDPE Mini Keyboard Tray Mounting Hole Pattern

The Phenolic Keyboard Tray with Swing-Out Mouse Tray from KV Waterloo lets one create a wide variety of custom configurations for their input devices. The Keyboard Tray portion is 20.5" wide at the front and tapers slightly narrower (20") at the back. A depth of approximately 10" means the tray is large enough to accommodate even the largest keyboards with integrated palmrests. Two anti-skid grip strips are positioned to keep a full-size keyboard secure on the tray surface. The tray ships with a detachable Foam-Gel palm rest which reduces the maximum keyboard depth to 7", still enough space for most standard keyboards.

The detachable mouse tray provides an 8.5" diameter mousing surface and features a unique tilting and rotating pivot mount which can be used to position the mouse tray either level with the keyboard tray or at 0.5", 1.25", 1.5" or 2" above the keyboard tray. The inclination or tilt of the mouse tray can also be adjusted, independent of the keyboard tray orientation, to any angle from all height settings. A repositionable mouse guard with cord clip ensures that the mouse stays in place. The pivot permits the mouse tray to be swung into the position which best meets the ergonomic needs. The range is a full 360° at the highest settings and reduces to 90° as the elevation is lowered to level with the keyboard tray. The mouse tray attaches to the keyboard tray via a clamp mount which can be secured at any point around the edge of the tray, further expanding the customization options as it can be easily reconfigured between left and right positions.Note: The dimensions of the clamp may limit the use of very wide keyboards (such a the Microsoft Natural Ergo Keyboard 4000). As well, with the palm rest installed, the mouse tray mounting clamp must be positioned about 2" further from the body as the palm rest extends the full width of the keyboard tray.