The EZ-RYZE MATRIX Foot Rest from ErgoVerse offers virtually effortless adjustment while providing optimal support for the feet. Unlike most footrests, this model (and companion ARC and SOLO models) can be easily adjusted with a single foot. The hands-free height adjustment relies on a locking pressurized gas spring that provides upward force. Once the lock release button is activated using a heel, the foot is used to counter the force of the spring and position the platform to the desired height before lifting the heel to lock the foot rest in at the new height - anywhere between 4.3" and 12.6" high.

The non-locking platform tilts freely between 0° and 30°, encouraging flexing of the feet and ankles during use. The large, rectangular ABS plastic platform measures 16.5" wide by 12.6" deep and has a matrix of non-slip bumps that offer comfort and a massaging effect for the feet when footwear is not in use. The sturdy steel frame and base feature a wide stance for stability and support. The base is equipped with large rubber feet for secure positioning.

Le EZ-RYZE MATRIX Foot Rest d'ErgoVerse offre l'ajustement pratiquement sans effort en fournissant le support optimal pour les pieds. Contrairement aux repose-pieds comparables, ce modèle (aussi que les modèles ARC et SOLO) peut être ajusté facilement avec seulement un pied. L'ajustement d'hauteur est fait sans les mains, mais plutôt avec un ressort à gaz pressurisé verrouillable qui fournit une force vers le haut. Une fois le bouton de relâche est activé avec le talon, le pied est utilisé pour contrer la force du ressort et positionner la plateforme à la hauteur désirée avant de lever le talon pour verrouiller le repose-pieds à la nouvelle hauteur - n'importe où entre 4.3po et 12.6po de haut.

La plateforme non verrouillée peut être inclinée librement entre 0°; et 30°, qui encourage la flexion des pieds et des chevilles durant l'usage. Une série de bosses non glissantes sur la plateforme en plastique ABS offre le confort et une action de massage pour les pieds. La grande plateforme rectangulaire (avec coins arrondis) mésure 16.5 po de largeur et 12.6 po de profondeur. Le cadre et la base en acier sont robustes et offrent une posture large pour la stabilité et le support; la base est équipée avec des pieds larges en caoutchouc pour une position sécure.

The GIGCHR Foldable Perching Seat from ErgoVerse is a temporary, foldable seating solution suitable for a wide range of applications. Designed for portability and weighing only 18.7 lbs, the GIGCHR enables musicians, public speakers and others to easily transport the chair between venues or job sites. The chair offers a seat height adjustment range from 21.25" to 35.4" and an ample back height adjustment range, so support can be positioned to provide optimum benefit. The GIGCHR features durable rectangular tube steel construction rated to 264 lbs., simple folding hinges, and easy handwheel adjustment of the seat, back and footrest heights. The seat and back of the GIGCHR are padded for comfort and upholstered in black imitation leather for easy cleaning.

The built-in height-adjustable footrest provides support for when the seat is raised to greater elevations, and is easily folded out of the way when not desired or for storage and transport.

Optional accessories include a guitar stand and a beverage holder.

Le GIGCHR Foldable Perching Seat d'ErgoVerse est une solution d'assis temporaire et pliable qui convient à une grande gamme d'applications. Conçu pour la portabilité et pesant seulement 18.7 livres, le GIGCHR permet aux musiciens, aux orateurs et à d'autres de transporter facilement le siège entre les salles de spectacle ou les sites de travail. La chaise offre une gamme d'ajustement de la hauteur d'assise de 21.25po à 35.4po et une grande gamme d'ajustement de la hauteur du dossier, ce qui permet de positionner le support de manière optimal pour bien profiter. Le GIGCHR est construit en tubes d'acier rectangulaires qui sont durable avec une capacité de 264 livres, de simples charnières de pliage (folding hinges) et d'un ajustement manuel facile (avec roulette à main) de la hauteur de l'assise, du dossier et du repose-pieds. L'assise et le dossier du GIGCHR sont rembourrés pour plus de confort et recouverts de similicuir noir pour un nettoyage facile.

Le repose-pieds intégré, ajustable en hauteur, offre un soutien lorsque le siège est plus élevé, et se replie facilement lorsqu'il n'est pas utilisé ou pour le rangement et le transport.

Les accessoires optionnels sont un support de guitare et un porte-boisson.

The SEET Leaning Stool from ErgoVerse is a lightweight portable leaning or perching stool with an integrated handle and rollers for ease of movement between work stations. The 16.5 pound SEET is suited more to short-term leaning or resting rather than as a long-term seat.

The tubular steel base supports a gas spring lift that helps to minimize impact when weight is brought to bear. It provides seat height adjustment from 24.8" to over 33". The unique "cylinder roll" seat is 12.75" wide, with a diameter of 3.5" and is formed from sturdy self-skinned non-absorbent polyurethane foam that is highly resistant to nicks or cuts. Deep cut ribbing on the roll provides a textured surface to facilitate airflow and helps to keep skin cool, dry and comfortable.

The heavy-duty textured black tubular steel base on the SEET provides strength and stability ideal for industrial settings but can also function in any location. Strong nylon glides engage the floor to ensure firm positioning of the seat and the incorporated rollers permit the chair to be easily moved between workstations. The unique design of the base maximizes stability while greatly reducing the risk of tripping for passersby.

The Double Adapter Accessory Mount from ErgoVerse provides GIGCHR users with a means of mounting either one or two of the available Guitar Stand and Beverage Holder accessories. This adapter can also be used on the MVMNT Foldable Perching Saddle Seat and the FYLDST Foldable Leaning Stool.

The NOSTND Perching Comfort PLUS Saddle Seat from ErgoVerse is designed to position the torso and arms as close as possible to a raised workstation, particularly those built on top of base cabinets or shelves. Unlike the seats on a leaning seat or traditional stool, the large plush saddle on the NOSTND is designed to be straddled. Seated posture on the NOSTND is more upright, with the heels positioned behind the bend of the knees, rather than extended forward of the knees as they would be in a leaning position. This posture allows individuals to move in much closer to flat-fronted work surfaces than might otherwise be possible. See this image of the TULEAN Leaning Stool, also from ErgoVerse, for an illustration of this latter position). As a result, the NOSTND Perching Comfort PLUS Saddle Seat helps to reduce the risk of overreach injuries to the shoulders and back, and the risk of injury to the muscles of the sides and mid-section caused by sitting sideways along the base of the workstation and twisting at the waist to get close enough to its surface. By providing a centrally supported seat that bears the upper body weight, the NOSTND also helps to reduce the load generally borne by the feet and legs. Overall fatigue, and the risk of strain on the joints and tissues of the lower limbs can be greatly reduced.

Both the saddle style seat and the large back feature 3" cushioning; and both are height adjustable. The height of the seat can be adjusted between 23.25" and 28.75". The height adjustment range of the back is determined by the seat position. A convenient handle and large rollers on the rear glides let the NOSTND be moved with ease when required. The NOSTND dual rectangular steel tube base is rated to support up to 440 pounds.

If a more traditional style of seat is preferred, the RSTMOR Drafting PLUS Chair, which is also rated to 440 pounds might be a consideration.

Le NOSTND Perching Comfort PLUS Saddle Seat d'ErgoVerse est conçu pour positionner le torse et les bras aussi près que possible d'un poste de travail surélevé, en particulier ceux construits sur des armoires basses ou des étagères. Contrairement aux sièges des chaises inclinés ou des tabourets traditionnels, la grande selle en peluche du NOSTND est conçue pour être chevauchée. La posture assise sur le NOSTND est plus droite, avec les talons positionnés derrière le pliage des genoux, plutôt qu'étendus devant les genoux comme ils le seraient dans une position de s'appuyer contre. Cette posture permet aux individus de se rapprocher des surfaces de travail à front plat plus que cela ne serait possible autrement. (Voir cette image du TULEAN Leaning Stool, également d'ErgoVerse, pour une illustration de cette dernière position). De cette raison, le NOSTND Perching Comfort PLUS Saddle Seat contribue à réduire le risque de blessures aux épaules et au dos dues à l'extension excessive, ainsi que le risque de blessures aux muscles des côtés et de la section médiane causées par le fait de s'asseoir latéralement le long de la base du poste de travail et de se tordre à la taille pour se rapprocher suffisamment de sa surface. En offrant un siège à support central qui supporte le poids du haut du corps, le NOSTND contribue également à réduire la charge généralement supportée par les pieds et les jambes. La fatigue générale et le risque de tension sur les articulations et les tissus des membres inférieurs peuvent être considérablement réduits.

Le siège de style selle aussi que le grand dossier sont dotés d'un rembourrage de 3po et sont tous deux ajustable en hauteur. La hauteur du siège peut être ajusté entre 23.25po et 28.75po. La gamme d'ajustements de la hauteur du dossier est déterminée par la position du siège. Une poignée pratique et de grandes roulettes sur les patins arrière permettent de déplacer facilement le NOSTND lorsque cela est nécessaire. La base à double tube d'acier rectangulaire du NOSTND est conçue pour supporter jusqu'à 440 livres.

Si un style de siège plus traditionnel est préférer, la chaise RSTMOR Drafting PLUS Chair, qui est également conçue pour supporter 440 livres, peut être considérer.

The HYSIIT Saddle Seat from ErgoVerse encourages an upright posture that permits free torso movement, results in deeper breathing, and improves overall circulation. This posture also enables greater reach and range of movement in the upper body, and makes it easy to return to a fully standing position.

The saddle stool design also creates a wider stance, providing a secure seated position that offers relief to the joints of the legs and feet. The breathable fabric saddle seat tilts forward up to 15°, rotating the pelvis forward and resulting in a more natural and comfortable alignment of the back. The full 360° of free rotation lets occupants swivel easily between work areas without the need to twist and turn at the waist. The stool can be positioned at any height from 26" to 35.8", and the easily adjusted gas cylinder creates a cushioning effect that gives slightly when weight is brought to bear, reducing the impact on the lower back.

Self-braking castors permit the stool to roll freely but will brake when weight is removed. This practical feature ensures that the seat remains secured in the same position when unoccupied. Long-wearing woven fabric over foam padding provides a breathable seat for better comfort.
Note: the HYSIIT Saddle Seat is intended for use by taller individuals - at least 5'7" and up. In addition, sitting on a saddle stool elevates the torso and arms higher than a standard seat. As a result, saddle stools are not generally recommended as a replacement for seating at a standard office desk. Please call one of our Product Specialists to discuss your intended use of the HYSIIT Saddle Seat. We will be happy to help you select the best solution for your needs.

The MVMNT Foldable Perching Saddle Seat from ErgoVerse is a non-swiveling, folding saddle seat designed for smaller or average sized individuals working at standard or elevated workstations.

The saddle design keeps the toes either in line with the knees (which are splayed and drawn back toward the hips), or even further back - below the hips, rather than extended forward of the knees as they would be on a leaning stool. This makes it possible to work at surfaces built on top of base cabinets or shelves, something that is not possible with traditional chairs (where the knees are too far forward) or leaning/perching seats (where the feet and knees are too far forward). The MVMNT also keeps the torso in an ergonomically desirable upright position, while at the same time providing stability and reducing the need to bend forward from the waist. This posture is especially beneficial when fine control is needed or when greater effort must be exerted. The small back rest offers temporary support for those who like to lean back occasionally to rest their back.

The height of the seat can be adjusted from 20.9" high to 30.7" high. The height of the back rest adjusts independently so individuals are able to position support where it is most needed. The seat and back rest are both padded for comfort and upholstered in black imitation leather for easy cleaning. The MVMNT features a foldaway, adjustable-height, foot-bar to provide a secure base of support when the chair is elevated too high for foot-to-floor contact.

The MVMNT features simple folding hinges, and easy handwheel adjustment of seat, back and footrest heights. The MVMNT is built on a sturdy, rectangular tube steel base that is rated to 264 lbs. Weighing only 18.7 lbs in total, the MVMNT can also be easily transported between venues or job sites.

The Beverage Holder Accessory from ErgoVerse gives GIGCHR users a convenient way of keeping a beverage up off the floor and within easy reach. This accessory can also be used on the MVMNT Foldable Perching Saddle Seat and the FYLDST Foldable Leaning Stool.

Note: Installation of the Beverage Holder Accessory requires the purchase of the Double Adapter Accessory Mount (GPS-ACC-90007) which can accommodate two separate accessories.

The Guitar Stand Accessory from EgoVerse provides GIGCHR users with a convenient way of keeping their guitar safely supported without the requirement of a separate guitar stand. This accessory can also be used on the MVMNT Foldable Perching Saddle Seatr and the FYLDST Foldable Leaning Stool.

Note: Installation of the Guitar Stand Accessory requires the purchase of the Double Adapter Accessory Mount (GPS-ACC-90007) which can accommodate two separate accessories.

The EQUESTRY Saddle Seat from ErgoVerse positions the body in an upright stance that is known to encourage upper body movement and deeper breathing. Together these have the potential to improve overall circulation and increase mental alertness. The upright stance also naturally realigns the spine and reduces the potential for lower back pain which is often associated with extended sitting. In addition it offers a significantly extended reach or "Comfort Zone" which reduces the risk of over-reaching.

The EQUESTRY Saddle Seat comes equipped with casters which lock when weight is lowered onto them, meaning that the chair does not move once one is seated. This makes this an ideal chair for those performing tasks which require fine control but also a full range of movement. The full 360° of free rotation lets workers easily align to equipment or reach other work areas as needed.

The gas lift provides a seat height anywhere between 22" to 27.6" and the seat also has the option of forward tilt up to 15°. This tilted seat position rotates the pelvis further forward, encouraging a more natural alignment of the back. Some may also find this additional tilt more comfortable. Since the casters lock when weight is put on the chair, shorter individuals may be able to employ the tilting option in order to use this stool as type of leaning solution when they need to move between locations and don't want to go into a fully seated stance.

The EQUESTRY Saddle Seat features easily cleaned black imitation leather upholstery and a chromium-plated steel base for durability.