The HYSIIT Saddle Seat from ErgoVerse encourages an upright posture that permits free torso movement, results in deeper breathing, and improves overall circulation. This posture also enables greater reach and range of movement in the upper body, and makes it easy to return to a fully standing position.

The saddle stool design also creates a wider stance, providing a secure seated position that offers relief to the joints of the legs and feet. The breathable fabric saddle seat tilts forward up to 15°, rotating the pelvis forward and resulting in a more natural and comfortable alignment of the back. The full 360° of free rotation lets occupants swivel easily between work areas without the need to twist and turn at the waist. The stool can be positioned at any height from 26" to 35.8", and the easily adjusted gas cylinder creates a cushioning effect that gives slightly when weight is brought to bear, reducing the impact on the lower back.

Self-braking castors permit the stool to roll freely but will brake when weight is removed. This practical feature ensures that the seat remains secured in the same position when unoccupied. Long-wearing woven fabric over foam padding provides a breathable seat for better comfort.
Note: the HYSIIT Saddle Seat is intended for use by taller individuals - at least 5'7" and up. In addition, sitting on a saddle stool elevates the torso and arms higher than a standard seat. As a result, saddle stools are not generally recommended as a replacement for seating at a standard office desk. Please call one of our Product Specialists to discuss your intended use of the HYSIIT Saddle Seat. We will be happy to help you select the best solution for your needs.

The FYLDST Foldable Leaning Stool from ErgoVerse can provide leaning, perching, or even sitting options. While all three positions reduce the weight load and stress on the joints of the legs and feet, the leaning and perching positions are especially beneficial as they make it possible to quickly move back to a fully standing position with minimal effort.

Designed for portability, and weighing only 14.3 lbs, the FYLDST lets individuals easily move their seat with them between locations or job sites. This stool offers an extended range of seat height adjustment from 21.25" to 35.4" which will accommodate most heights and is rated to support 264 lbs. Heavy rectangular tube steel construction, simple folding hinges, and handwheel adjustment of seat height mean this chair will last through years of heavy use. The fixed, formed polyurethane seat angles slightly down at 10°, providing a comfortable resting place when needed, well suited to perching or leaning. The textured surface of the seat facilitates airflow and makes the seat feel softer, improving comfort.

The simple design of this model results in a fixed and rigid seating position, with the only cushioning being that of the reasonably firm formed-polyurethane seat. Those looking for more cushioning or not requiring portability may wish to consider one of the numerous other models from ErgoVerse, that greater cushioning in the seats or gas spring cylinders for shock absorbance.

The MVMNT Foldable Perching Saddle Seat from ErgoVerse is a non-swiveling, folding saddle seat designed for smaller or average sized individuals working at standard or elevated workstations.

The saddle design keeps the toes either in line with the knees (which are splayed and drawn back toward the hips), or even further back - below the hips, rather than extended forward of the knees as they would be on a leaning stool. This makes it possible to work at surfaces built on top of base cabinets or shelves, something that is not possible with traditional chairs (where the knees are too far forward) or leaning/perching seats (where the feet and knees are too far forward). The MVMNT also keeps the torso in an ergonomically desirable upright position, while at the same time providing stability and reducing the need to bend forward from the waist. This posture is especially beneficial when fine control is needed or when greater effort must be exerted. The small back rest offers temporary support for those who like to lean back occasionally to rest their back.

The height of the seat can be adjusted from 20.9" high to 30.7" high. The height of the back rest adjusts independently so individuals are able to position support where it is most needed. The seat and back rest are both padded for comfort and upholstered in black imitation leather for easy cleaning. The MVMNT features a foldaway, adjustable-height, foot-bar to provide a secure base of support when the chair is elevated too high for foot-to-floor contact.

The MVMNT features simple folding hinges, and easy handwheel adjustment of seat, back and footrest heights. The MVMNT is built on a sturdy, rectangular tube steel base that is rated to 264 lbs. Weighing only 18.7 lbs in total, the MVMNT can also be easily transported between venues or job sites.

The Beverage Holder Accessory from ErgoVerse gives GIGCHR users a convenient way of keeping a beverage up off the floor and within easy reach. This accessory can also be used on the MVMNT Foldable Perching Saddle Seat and the FYLDST Foldable Leaning Stool.

Note: Installation of the Beverage Holder Accessory requires the purchase of the Double Adapter Accessory Mount (GPS-ACC-90007) which can accommodate two separate accessories.

The Double Adapter Accessory Mount from ErgoVerse provides GIGCHR users with a means of mounting either one or two of the available Guitar Stand and Beverage Holder accessories. This adapter can also be used on the MVMNT Foldable Perching Saddle Seat and the FYLDST Foldable Leaning Stool.

The Guitar Stand Accessory from EgoVerse provides GIGCHR users with a convenient way of keeping their guitar safely supported without the requirement of a separate guitar stand. This accessory can also be used on the MVMNT Foldable Perching Saddle Seatr and the FYLDST Foldable Leaning Stool.

Note: Installation of the Guitar Stand Accessory requires the purchase of the Double Adapter Accessory Mount (GPS-ACC-90007) which can accommodate two separate accessories.

The PLEIONE Mobile Pedestal File Cabinet from ErgoVerse has been designed specifically for use with height adjustable desks. The low 19" height means that it can be safely stowed beneath all except the very lowest of adjustable desks. This low height ensures that it remains clear of crossbars, even with desks at their lowest height. The steel construction, when combined with the compact dimensions of the PLEIONE, results in an exceptionally sturdy unit.

Despite the compact dimensions the PLEIONE Mobile Pedestal File Cabinet does not sacrifice functionality. The lower drawer can be configured for either Letter or Legal-sized hanging folders. It is also equipped with a front stabilizing caster that lets the drawer be fully extended without any risk of tip-over. The upper drawer can store additional office supplies or personal items and comes with a convenient pencil and stationery item insert. Both drawers move effortlessly on steel ball-bearing rails and can be secured with a single lock, ensuring security and privacy for personal or sensitive documents. The PLEIONE is also fully mobile, with lockable front casters and a convenient front handle to make repositioning easy.

The LYNX Tablet/Laptop Stand from ErgoVerse is a light-weight, portable tablet/laptop stand with a built-in USB fan for cooling. The ultra-thin design employs aluminum alloy panels that dissipate heat while providing a durable and stable surface. The back of the LYNX has storage for the USB fan cable (included) and also flash drives or USB wireless receivers (not included) within their own hidden compartments, keeping them easily accessible when needed. There are 6 angled adjustments from 0° to 44° and it easily accommodates tablets or laptop up to 17", so that the screen can be raised or lowered to the appropriate ergonomic height or angle while viewing.

The LYNX stand also comes with a convenient padded storage sleeve to protect it when not in use or while traveling.

Le LYNX Tablet/Laptop Stand d' ErgoVerse est un support de tablette / ordinateur portatif léger et portatif avec un ventilateur USB intégré (câble USB inclus) pour refroidir la tablette ou l'ordinateur portable pendant son utilisation. Les charactéristiques des panneaux ultra-mince fait en aluminium allié aide à disperser la chaleur en même temps qu`il fournit une surface durable et stable. L'arrière de l'unité peut également ranger le câble USB pour le ventilateur(inclus) et également les lecteurs flash (pas inclus) dans leurs propres compartiments cachés, de sorte que l'utilisateur peut facilement transporter tout dans un appareil compact. Il y a 6 ajustements angulaires de 0 ° à 44 ° pour n'importe quelle tablette ou ordinateur portable jusqu'à 17po, de sorte que l'écran peut être élevé ou abaissé à la hauteur ergonomique appropriée tout en regardant.

Le support LYNX vient également avec son propre pochette pour le protéger lorsqu'il n'est pas utilisé ou en voyage.