The Articulating Gel Forearm Support with Removable Mouse Tray from Aidata reduces the load borne by the muscles of the shoulders and upper back when individuals are typing, mousing or using precision instruments and tools. By fully supporting the weight of the extended forearm, the support relieves the strain on these smaller upper body muscles and helps to reduce the associated risk of fatigue and injury. The Articulating Gel Forearm Support is jointed at two points to enable height and angle adjustment, and swivels at three points to allow natural, free-flowing arm movements throughout the work session. A soft gel forearm pad cradles the forearm to eliminate pressure on the sensitive underside of the arm and allows blood to circulate unimpeded.

L'Articulating Gel Forearm Support with Removable Mouse Tray de Aidata réduit la charge portée par les muscles des épaules et du haut du dos en travaillant devant l'ordinateur, ou en travaillant avec des outils ou des instruments de précision. En appuyant au complèt la charge des avants bras étendus, l'appareil soulage la pression sur ces petits muscles du corps supérieur, et aide à réduire le risque de fatigue et de blessure. L'Articulating Gel Forearm Support est articulé avec deux points pour permettre les ajustements d'hauteur et d'angle, et pivot à trois points pour permettre le mouvement naturel et fluide pendant la session de travail. Un coussinet d'avant bras en gel mou berce l'avant bras pour éliminer les points de pression sur le dessous du bras et permet la circulation sanguine libre.

The Monitor Visor from Kantek prevents overhead and lateral reflection and glare, either from overhead lighting or windows. The full length sides provide privacy and the entire unit is fully adjustable and made of durable high impact plastic. A velcro strip is attached to the top of the visor to affix it to the LCD or CRT, ensuring that the visor doesn't fall off during normal use of the monitor. Installation is quick, easy and requires no tools.

These monitor visors are designed to fit traditional 4:3 Ratio CRT and LCD monitors but can also be used with some newer widescreen flat panel monitors (see NOTE below). There are two sizes, one for 14"-17" 4:3 ratio monitors and a larger one to fit 19"-21" 4:3" monitors.

Note:Fitting to Widescreen Monitors: Only the larger MV19/21B will work with widescreen monitors and only those with the following parameters: Maximum physical width of monitor no greater than 20.5", minimum 1/2" wide side bezels on front of monitor, 1/2" minimum flat surface along the top of the monitor, and a mimiumum 13.5" height from desk to top of monitor.
Note: WE ARE UNABLE TO OFFER A 30 DAY CUSTOMER SATISFACTION GUARANTEE OR WARRANTY ON THIS PRODUCT.

The Laptop Lift from Great Products Group provides 12 choices for custom fitting a laptop. At less that one inch thick (23 mm) the Laptop Lift can be taken anywhere, whether the home or office, in a hotel or on an airplane. Made from high-grade plastics and stainless steel, the Laptop Lift gives a rugged, durable and tough platform for computing needs.

The LapTraveler RWHD Series Mobile Desk is a heavy duty mobile desk designed to create an ergonomic workstation in a vehicle. Made of sturdy ABS molded plastic, the Laptop Desk offers forward and backward tilt, as well as side to side tilt. The platform measures 13" X 14" and can support computers weighing up to 30 lbs.

Two types of base are available. The No-Drill base attaches to the vehicle without any tools required; the Drill base is bolted permanently to the vehicle. Both versions of the Laptop Desk come with three telescoping tubes to provide maximum adjustability.

Note: We are unable to offer our 30-Day Customer Satisfaction Guarantee on this product.

This palm rest is specifically contoured to fit 19" Microsoft Elite and Natural keyboards (it cannot flex to fit the contours of other keyboards). A unique adjustable incline facilitates personalized palm positioning while the gel permits a more natural fluid wrist motion for healthy computing. A non-skid base prevents undesired movement.
Note: Due to the nature of this product we cannot offer our 30 day customer satisfaction guarantee on this product.

The U-Slope and U-Slope Mini by Ergonomic Cafe are designed to reduce repetitive strain on the neck, shoulder and upper back muscles by positioning reading and reference materials inline between the keyboard and the monitor. The U-SLope can be pulled forward over the keyboard for close reading or writing, and then pushed easily back towards the monitor.

The U-Slope is available in two widths. The U-Slope standard model is 20" wide and designed to fit most full width keyboards. The U-Slope Mini is only 15" wide, designed to fit over compact keyboards. Both models measure 11.75" from front to back and offer eight angles of adjustment, to a maximum of 45°. A magnetic document clip keeps pages flat and aids in navigating through the text, and a foam ledge keeps documents in place.

Note: We are unable to offer our 30-Day Customer Satisfaction Guarantee on this product. Please call to enquire about clearance pricing and stock availability.

The Laptop Desk 2.0 is the only lap desk product on the market that easily converts from a laptop tray to a desktop stand for your notebook!

In the desktop application, you can choose from one of five typing angles. Positioning the keyboard in an incline can assist in reducing shoulder and back strain (it helps to lean back in your chair). At full extension, the support arm raises the screen level by 3.25" (8.2 cm) closer to eye level reducing neck strain. Of course it is always recommended to use an external keyboard and mouse when using your laptop to ensure ideal ergonomic posture.

With normal use of your notebook on your desktop, you will often hear the cooling fan turn on to cool the computer. With the Laptop Desk 2.0, you will hear the fans turn on much less often. Ventilation channels in the product cool your notebook through convection and contact with the no-slip rubber surfaces cool your notebook by conduction by at least 15-20%.

The versatile Laptop Desk is lightweight and folds for easy storage (Folded Size: 11.13" x 10.69" x 0.63" (28.3 cm x 27.2 cm x 1.6 cm)) in your laptop bag (Weight: 1 lb 6 oz (624 grams)). When you're away from a desk or fixed work surface, simply unfold the Laptop Desk for a wide, stable and comfortable platform of super-strong polycarbonate material right on your lap (Unfolded Size: 20.56" x 11.13" x 0.31" (52.2 cm x 28.3 cm x 0.8 cm)).

The Light Duty Mobile Laptop Desk by Interactive Products Corporation is a highly adjustable laptop stand designed to create an ergonomic workstation in a vehicle. Made of black ABS plastic, the stand can support computers up to 30 lbs, and works in all vehicles that have front-seat bolts (i.e. not hooks). The stand does not interfere with airbags and can be removed quickly and easily. Two bases are available: one that can be permanently attached with screws (requires drilling into the base of the vehicle seat), and one that attaches using a clamp.

Note: We are unable to offer our 30-Day Customer Satisfaction Guarantee on this product.

The Freedom Stand Monitor Riser and Document Holder provides 2" of additional elevation for monitors. The large surface area is sufficient to support the majority of monitor bases. The basic Freedom Stand , Model VUR-1776-PH,does not include the document holder clip and serves only as a monitor riser. Model VUR-1776-PHL includes an angle-adjustable document holder clip that can be mounted for either left or right hand use and thus serves as both a monitor riser and a document holder.

This product represents a new product option for mobile professionals and road warriors. It provides a mobile worksurface, secure storage compartment, docking station, desk and filing cabinet all in one convenient package!

• Secure all your mobile devices from theft with a CarGo Desk Car Organizer
• Easy and ergonomic movement of the car organizer with handle and wheel option
• 100% durable plastic
• Lightweight construction
• This vehicle organizer is perfect for cars, trucks, vans, & semi trucks
• Large writing surface standard with pull out extension - both covered with rubberized non skid material

This product gently supports the palm and serves as a mobile palm rest which can attach to many traditional mice.

• Glides with the mouse reminding the user of proper posture -- while providing full-time support.
• Excellent for drawing in graphic design and desktop publishing with mice, CAD digitizer pucks and tablets, and with CATIA work stations.
• People that instinctively grip the mouse excessively will find their need to grip the mouse reduced.
• Fingers control the fine detailed movement -- enhanced by the palm support -- as the constantly supported upper extremity [palm to wrist to arm] glides the mouse over broad areas.
• The base is a lamination of materials engineered for easy gliding and to be gentle on the desktop or digitizer tablet.

These high quality Power Nodes from iMovR are designed to fit 3" grommet holes and provide desktop power access. A locking ring locks the node into place from the underside of the desk. There are two models available, one offering Dual AC outlets and the second model offering a single AC outlet and dual USB outlets. All models are equipped with a sturdy 6 foot cord to route power from floor level, even on sit-stand desks.

The ClickIt-4ARM Adjustable Work Surface from SmartMotion Technology is a height and tilt adjustable work surface designed to support the forearms, upper arms, shoulders and neck while maintaining neutral positioning of the wrists. It tilts the entire work area, including keyboard and mouse, at an angle permitting the user to relax against their backrest while maintaining an open thigh-torso angle. Optional Left or Right forearm cushion accessories (shown in the image) are attached after installation, which allows the size of the user pocket to be determined by the pad placement. The 27" W x 20" deep work surface attaches to a heavy duty storable arm that permits partial storage of the work surface below the desk as well as providing the height and angle adjustment.
Note: WE ARE UNABLE TO OFFER A 30 DAY CUSTOMER SATISFACTION GUARANTEE OR WARRANTY ON THIS PRODUCT. Work Surface may have cosmetic damage.

These Handle Set accessories from Innovative provide a convenient way to reposition a monitor. These robust handles are equipped with handles to either side of the monitor, giving the operator full control of positioning. This also addresses sanitary concerns in medical environments as the handles can easily be covered with disposable plastic or medical gloves.
There are two models available. The 8409 model, available in Black, is a fixed width set and will accommodate monitors up to 22" in width (left to right including the bezel). The 8291 model is an earlier adjustable design that adjusts for monitor widths from 15.3" to 20.5" in width. These weigh 7 lbs which must be added to the monitor weight when choosing a suitable monitor arm (i.e. if the monitor is 12 lbs, with the installation of the handle weighing 7 lbs, then the total weight on the arm would be 19 lbs).

The Mouse Manager enables the user to place documents, books and binders at eye level, reducing eye and neck strain, and creating a mousing area in a more comfortable location. The Mouse Manager is constructed from durable plastic and is available in smoke (darkly tinted) or clear. The Mouse Manager can hold documents in a variety of shapes and sizes, from a single page, up to fifteen pounds of paper.

A light, portable stand for the go anywhere user. Perfect for stenographers, boardrooms, airports, etc.

• Durable chrome plated finish holds laptop computers or stenograph machines.
• Sturdy tripod base
• Compu-Loc computer securing system
• CP-JR - height adjusts from 15" to 26.5"
• CP-JR-PLUS - height adjusts from 20" to 31.2"
• Pedestal rotates 360° with a single knob adjustment
• Top tilts 270° for perfect positioning
• Platform Dimensions: 13" x 13" x 1"
• Weight: 3 lbs
• Folds up for easy transport - collapsed tripod dimensions: CP-JR - 14.75" X 3", CP-JR-PLUS - 20" x 3"

Your presentation in a darkened boardroom will have more impact now, because you can actually see your laptop's keyboard rather than guessing (and missing) the right keys to hit. The gentle illumination of the FlyLight™ won't drain your battery or disturb others.

Helps protect fragile LCD screens from scratches, fingerprints and damage. Frameless design fits right into the bezel of older 4:3 ratio laptop and LCD desktop monitors. Reduces glare; doesn't interfere with monitor controls or speakers and can remain on laptop when closed. Comes with two different attachment methods to meet most needs.

The X-Style Flip and Find Display Carousel keeps large amounts of frequently referenced information organized, easy to read, and retrievable at a moment's notice. The display carousel takes up minimal room on the desk top, yet provides storage for up to eighty pages in forty double-sided display panels. The anti-glare display panels are notched at the top for easy loading, and can accommodate papers up to US-Letter sized (8.5" by 11"). The panels have sturdy, durable edges to allow fast page turning and to provide rigid support for papers. Index tabs and labels are included to allow individuals to create an organizational structure.

The X-Style Flip and Find Display Carousel is designed to rotate a full 360º and is supported on a weighted base to ensure stability.

The Savant Programmable 20-Key Keypad from Kinesis features the same low-force, long-life tactile mechanical key switches used on the Kinesis Advantage keyboards. Two-layer functionality allows two functions to be programmed into every key.