The Amazone Balance with Adjustable Lumbar Support from Score is an excellent solution for those concerned about ergonomics and who want to seek alternatives to static seating. The Amazone Balance combines the posture-correcting benefits of a saddle seat with the "Balance" mechanism that permits the seat to continuously shift and adjust in response to movement throughout the day. The addition of an adjustable (and removable) Lumbar Support makes this version of the Amazone Balance suitable for a wide range of applications, especially those where one may be sitting for extended periods and wanting to occasionally let muscles rest.

The Balance mechanism, located directly below the seat, lets the seat move and shift with any body movement. In order to accommodate individual needs and preferences the degree of resistance on the movement is easily adjusted with a few turns of the ring located just below the seat. This ring also doubles as a height adjustment release meaning that there is no need to reach and find a single lever when height adjustment is required, as the ring is accessible at any position.

The saddle of the Amazone Balance is a slightly narrower fit or "cut" than many other saddle seats and has a moderate pommel rise at the front. The smaller dimensions make it better suited for use by those of slender or petite builds. The narrower cut also means that it can accommodate positions higher than the 45° downward thigh angle commonly recommended for saddle sitting. This can be of value in situations such as dental care where the greater stability of a "standing" position is required while still having the supportive benefits of "sitting". The posture created by the Amazone Balance means that most individuals will find the majority of their weight supported by the chair with the balance shared between the feet.

The Adjustable Lumbar Support is attached to the rear of the seat mechanism. This means that it follows all movement of the seat, always maintaining the desired position. The two-inch range of height adjustment accommodates a range of builds and the angle adjustment locks at any point within the range to either encourage or ensure proper upright posture or to permit a slight recline for resting.

The Amazone Balance with Adjustable Lumbar Support is currently in stock with premium 2-tone Capri Blue/Black Stamskin® artificial leather for extreme durability and comfort.

The GIGCHR Foldable Perching Seat from ErgoVerse is a temporary, foldable seating solution suitable for a wide range of applications. Designed for portability and weighing only 18.7 lbs, the GIGCHR enables musicians, public speakers and others to easily transport the chair between venues or job sites. The chair offers a seat height adjustment range from 21.25" to 35.4" and an ample back height adjustment range, so support can be positioned to provide optimum benefit. The GIGCHR features durable rectangular tube steel construction rated to 264 lbs., simple folding hinges, and easy handwheel adjustment of the seat, back and footrest heights. The seat and back of the GIGCHR are padded for comfort and upholstered in black imitation leather for easy cleaning.

The built-in height-adjustable footrest provides support for when the seat is raised to greater elevations, and is easily folded out of the way when not desired or for storage and transport.

Optional accessories include a guitar stand and a beverage holder.

Le GIGCHR Foldable Perching Seat d'ErgoVerse est une solution d'assis temporaire et pliable qui convient à une grande gamme d'applications. Conçu pour la portabilité et pesant seulement 18.7 livres, le GIGCHR permet aux musiciens, aux orateurs et à d'autres de transporter facilement le siège entre les salles de spectacle ou les sites de travail. La chaise offre une gamme d'ajustement de la hauteur d'assise de 21.25po à 35.4po et une grande gamme d'ajustement de la hauteur du dossier, ce qui permet de positionner le support de manière optimal pour bien profiter. Le GIGCHR est construit en tubes d'acier rectangulaires qui sont durable avec une capacité de 264 livres, de simples charnières de pliage (folding hinges) et d'un ajustement manuel facile (avec roulette à main) de la hauteur de l'assise, du dossier et du repose-pieds. L'assise et le dossier du GIGCHR sont rembourrés pour plus de confort et recouverts de similicuir noir pour un nettoyage facile.

Le repose-pieds intégré, ajustable en hauteur, offre un soutien lorsque le siège est plus élevé, et se replie facilement lorsqu'il n'est pas utilisé ou pour le rangement et le transport.

Les accessoires optionnels sont un support de guitare et un porte-boisson.

The Twin Adjustable Saddle Chair with Backrest from Kanewell features the same comfortable split-saddle seat as the Twin Adjustable Saddle Stools. Along with seat width and angle adjustments, however, this model adds a large, generously padded fixed backrest for users who would benefit from the security of a seat back. (See note below.)

The EQUESTRY Saddle Seat from ErgoVerse positions the body in an upright stance that is known to encourage upper body movement and deeper breathing. Together these have the potential to improve overall circulation and increase mental alertness. The upright stance also naturally realigns the spine and reduces the potential for lower back pain which is often associated with extended sitting. In addition it offers a significantly extended reach or "Comfort Zone" which reduces the risk of over-reaching.

The EQUESTRY Saddle Seat comes equipped with casters which lock when weight is lowered onto them, meaning that the chair does not move once one is seated. This makes this an ideal chair for those performing tasks which require fine control but also a full range of movement. The full 360° of free rotation lets workers easily align to equipment or reach other work areas as needed.

The gas lift provides a seat height anywhere between 22" to 27.6" and the seat also has the option of forward tilt up to 15°. This tilted seat position rotates the pelvis further forward, encouraging a more natural alignment of the back. Some may also find this additional tilt more comfortable. Since the casters lock when weight is put on the chair, shorter individuals may be able to employ the tilting option in order to use this stool as type of leaning solution when they need to move between locations and don't want to go into a fully seated stance.

The EQUESTRY Saddle Seat features easily cleaned black imitation leather upholstery and a chromium-plated steel base for durability.

The Salli MultiAdjuster features a lockable, adjustable version of Salli's patented split saddle seat design. This seat is designed to correctly position the user in such a way that their back is moved into an optimum upright posture. Weight is transferred onto the sitting bones and off of soft tissue, reducing uncomfortable pressure points. The MultiAdjuster feature permits width and splay adjustment of the independent halves and combines these features with a forward tilt option to further improve back posture for those desiring a greater forward tilt or who, in the course of their work, lean forward repeatedly or for extended periods. The infinitely variable forward tilt lowers the front of the saddle and reduces pressure in the lower pelvic region. The MultiAdjuster's design encourages an upright stance and open core which facilitates upper-body movement and can provide many of the benefits currently being attributed to Standing Workstations without the necessity of being on one's feet throughout the day.

Note: If the concept of width and splay adjustment has appeal but static sitting is not desired the SwingFit might be the solution as it features the same width/splay adjustment but combines it with a unique rocking mechanism which permits free seat movement in all directions.

Height adjustment of the gas spring lift is accomplished through a standard hand-controlled height adjustment lever. Available lift sizes and the corresponding heights they accommodate are as follows: Short (4'0" to 5'2"), Mid (5'1" to 6'1") and Tall (5'8" to 6'5"). The 5-point star base and lift are in an attractive chrome finish. The total weight of the chair is 11.1 kg (24.4 lb).The MultiAdjuster is only available by Special Order and can be purchased upholstered in either genuine leather or polyurethane faux leather, each available in a range of colours.

The PYRCH Saddle Seat from ErgoVerse encourages the adoption of a partially elevated upright stance that encourages more upper body activity, better and deeper breathing, and improved overall blood flow. This type of posture offers a greater range of reach and can also lead to a higher degree of alertness. The upright position also makes it easy to return to a fully standing position, reducing stress on the knees.

When seated on the PYRCH Saddle Seat, the legs are positioned in a wider stance than is possible on a leaning stool or standard chair. Because the saddle can be elevated to any height between 26" and 35.8" it can serve the needs of a wide range of individuals, even those working at elevated workstations. The saddle can also be tilted forward up to 15° and offers a full 360° of free rotation. This capacity for full rotation makes the PYRCH a practical solution for workers who may need to swivel between different work surfaces when accessing parts or equipment. When the seat pan is tilted the PYRCH can also provide a limited degree of leaning capability. The robust black tubular steel base provides strength and stability, with strong nylon glides that ensure secure positioning.

Note: Sitting on a saddle stool elevates the torso higher than a standard seat. Saddle stools are therefore not generally recommended as a replacement for seating at a standard office desk. Please call one of our Product Specialists to discuss your intended use of the PYRCH Saddle Seat. We will be happy to help you find the best solution for your needs.

The Salli Strong is a beefed-up version (for heavier individuals up to 330 lbs) of the the Salli Tilting Twin chair. There is a lever to provide adjustment allowing the split saddle seat to be adjusted on the front-back axis, and upon releasing the lever the chair will lock in that position. This makes it possible for the user to adjust the position of the seat to the optimal angle and make micro-adjustments over time as needed, and receive the appropriate orthopedic support from the split saddle seat design. The width of the two halves of the saddle seat is fixed and cannot adjust. A standard hand-controlled height adjustment lever for adjustment of the gas spring lift accommodates most adults. Available lift sizes and the corresponding heights they accommodate are as follows: Medium fits 5'1" to 6'1" (Seat height 22.5"-30") and Tall fits 5'8" and over (Seat height 25"-35"). The oversized (60 cm) 5-star base and lift are available by default in an attractive chrome finish. The total weight of the chair is 13 kg (28.6 lb), including the 9 kg (19.8 lb) seat, and is currently only stocked in a black leather.

The HYSIIT Saddle Seat from ErgoVerse encourages an upright posture that permits free torso movement, results in deeper breathing, and improves overall circulation. This posture also enables greater reach and range of movement in the upper body, and makes it easy to return to a fully standing position.

The saddle stool design also creates a wider stance, providing a secure seated position that offers relief to the joints of the legs and feet. The breathable fabric saddle seat tilts forward up to 15°, rotating the pelvis forward and resulting in a more natural and comfortable alignment of the back. The full 360° of free rotation lets occupants swivel easily between work areas without the need to twist and turn at the waist. The stool can be positioned at any height from 26" to 35.8", and the easily adjusted gas cylinder creates a cushioning effect that gives slightly when weight is brought to bear, reducing the impact on the lower back.

Self-braking castors permit the stool to roll freely but will brake when weight is removed. This practical feature ensures that the seat remains secured in the same position when unoccupied. Long-wearing woven fabric over foam padding provides a breathable seat for better comfort.
Note: the HYSIIT Saddle Seat is intended for use by taller individuals - at least 5'7" and up. In addition, sitting on a saddle stool elevates the torso and arms higher than a standard seat. As a result, saddle stools are not generally recommended as a replacement for seating at a standard office desk. Please call one of our Product Specialists to discuss your intended use of the HYSIIT Saddle Seat. We will be happy to help you select the best solution for your needs.

The Salli Chin is a more economical model of the premium Salli Twin model, and provides all the orthopedic support and benefits that come from the patented split saddle seat design. The Chin differs in that it has a lighter seat frame, standard (as compared to premium) components, and only one colour option.

The split saddle seat design maintains the natural shape of the spine, strongly influencing the user to have good posture while sitting and working. The gap allows the tailbone to 'float', minimizing soft tissue pressures and spinal loads. The width of the two halves of the saddle seat are fixed and cannot adjust but the design accommodates most individuals body types.

A standard hand-controlled height adjustment lever for adjustment of the gas spring lift accommodates most adults. Available lift sizes and the corresponding heights they accommodate are as follows: Short (4'0" to 5'2, Mid (5'1" to 6'1") and Tall (5'8" to 6'5"). The 5-point star base and lift are in an attractive chrome finish.The Salli Chin is is available in either Black Leather or Black Polyurethane (synthetic leather).

The SEET Leaning Stool from ErgoVerse is a lightweight portable leaning or perching stool with an integrated handle and rollers for ease of movement between work stations. The 16.5 pound SEET is suited more to short-term leaning or resting rather than as a long-term seat.

The tubular steel base supports a gas spring lift that helps to minimize impact when weight is brought to bear. It provides seat height adjustment from 24.8" to over 33". The unique "cylinder roll" seat is 12.75" wide, with a diameter of 3.5" and is formed from sturdy self-skinned non-absorbent polyurethane foam that is highly resistant to nicks or cuts. Deep cut ribbing on the roll provides a textured surface to facilitate airflow and helps to keep skin cool, dry and comfortable.

The heavy-duty textured black tubular steel base on the SEET provides strength and stability ideal for industrial settings but can also function in any location. Strong nylon glides engage the floor to ensure firm positioning of the seat and the incorporated rollers permit the chair to be easily moved between workstations. The unique design of the base maximizes stability while greatly reducing the risk of tripping for passersby.