The Altissimo Sit-Stand Workstation from KV Waterloo is an all-in-one solution for converting a sitting desk into a sit-to-stand desk. Mounted at the back, side or corner of the desk, this space-saving workstation effortlessly moves up or down using a gas spring mechanism and is easily stored when not in use. The Single Workstation (6011 Series) accommodates monitors from 5 to 20 lbs, while the Dual Workstation (6021 Series) handles monitors up to 8 lbs each and 24” wide (diagonally).

The height range of the Altissimo is an impressive 22” with the keyboard tray ranging from 5” below desk height to 17” above the desk. The monitor has an additional 9.5” of independent adjustment and can be tilted to 45° or rotated 90° from landscape to portrait orientation. In addition, the monitor tower can rotate independently of the worksurface 180° from left to right.

The keyboard tray is angle adjustable with 14° of negative incline and 4° of positive incline, while also being height adjustable relative to the upper platform. All these adjustable ranges make the Altissimo one of the most versatile sit-stand solutions available. (This model is slightly more versatile than the Altissimo-Plus Sit Stand Workstation, below.)

Note: Those who have already purchased the Single Workstation can upgrade to the Dual model by ordering the Dual Mounting Kit (6021AS60/6021E60). Available colours are Silver (with Gray Accents), Black (with Black Accents), and White (with Gray Accents) (Special Order only).

The Tempo Single Monitor Arm from KV Waterloo is a versatile, stylish monitor arm made of diecast aluminum for monitors ranging from 5 to 30 lbs. This arm uses a gas spring mechanism for smooth movement in all directions with 14.5” of vertical range and a maximum horizontal extension of 26.75” (from back of monitor mount to VESA plate). The lower arm is fixed at a 45° angle, ensuring that arm movement is not obstructed by other items on the desktop. The counterbalance on the arm has a numbered weight gauge (5 to 20 lbs) to provide an indication of the current counterbalance weight. Cable management is included, consisting of a hollow plastic tube and cable clips, and the Quick Connect Adaptor simplifies mounting and swapping monitors when needed.

There are two models of the Single Monitor Arm: a light duty model (7750) with a weight capacity of 5 to 20 lbs and a heavy duty model (7755) with a weight capacity of 10 to 30 lbs. Both models come with both clamp and grommet mounting systems.

The Transporter cart offers a space-saving solution for mobile PC use. It accepts all the components of your workstation, including keyboard, mouse, LCD display, CPU, laptop, printer, and power supplies. Its modular design increases efficiency and adjustability, and facilitates sit/stand use. The Transporter's construction is rugged yet lightweight, suitable for a variety of environments, from hospital and lab use to office or home. Components of the cart include:

• 60" Stainless steel pole with monitor mount (75 mm and 100 mm VESA compliant), with tilt and swivel
• 27" Aluminum base with five 3" casters (2 lockable)
• Keyboard extension arm
• Lockable CPU holder (9770S and 9740S models only)
• Peripheral shelf (for laptop or printer)
• Power and cable management
• Catch-all tray
• Harmony keyboard tray: Mousing surface can be positioned on the right or left, and rotates forward up to 20°. Anti-skid pads hold keyboard in place. 23" wide (32" wide with mousing surface extended) x 12.3" deep. Gel-like foam snap-in palm rest. Tray is black and composed of ABS plastic.

The Solo LCD monitor arm from KV Waterloo enables a full range of motion and ensures a high degree of monitor stability. Simple and easy to use with minimal workspace clutter, Solo is ideal for small workspaces and home offices. Designed to counterbalance monitor weights from 6 to 12 lbs, it makes adjustment of the monitor easy and simple. Features include:

• Low-profile mounting system and integrated cable management snap-on shroud
• Unique, multi-dimensional swivel system
• VESA standard mounting plate
• Swivel adjustment on arm base and mounting head
• Tension control knobs
• Gromment mounting option included

The Concerto Extended Reach Pole Mount Monitor Arm from KV Waterloo is a stylish, easy-to-install pole-style monitor arm that offers monitor elevations up to 22.5" above the mounting point. The quadruple-jointed articulating extension arm freely swivels about the base 360°, with the triple extensions allowing forward movement up to 29" from the mount while still folding back to just 5" deep. The 18" pole provides 12.75" of height adjustment as needed and one section of the extension provides 6" of spring-loaded height adjustment from any position. This arm is equipped for both desk clamp and grommet hole installation. This unit also comes with cable management to keep cables neat, and fits monitors complying with VESA 75mm and 100mm hole patterns.
Note: WE ARE UNABLE TO OFFER A 30 DAY CUSTOMER SATISFACTION GUARANTEE OR WARRANTY ON THIS PRODUCT.

The Concerto Pole Mount Monitor Arm from KV Waterloo is a stylish, easy-to-install pole-style monitor arm that offers monitor elevations up to 22" above the mounting point. The dual-jointed articulating extension arm freely swivels 360° around the 18" mounting pole. The pole offers 12.75" of vertical height adjustment and the spring-loaded second extension section of the arm offers a 6" range of height adjustment from any position. This arm is equipped for both desk clamp and grommet hole installation and comes with cable management to keep cables neat, and fits monitors complying with VESA 75mm and 100mm hole patterns.
Note: WE ARE UNABLE TO OFFER A 30 DAY CUSTOMER SATISFACTION GUARANTEE OR WARRANTY ON THIS PRODUCT.

The Prima Keyboard Tray from KV Waterloo is an exceptionally sturdy keyboard tray that incorporates an adjustable mousing surface which can be pivoted toward the user on either the left or right side. The rigid mousing surface easily slides to the right or left as required or can even be fully stored beneath the keyboard. The ease with which the mousing surface can be re-positioned makes this tray a good selection for someone who has limited width for tray storage (with the mousing surface centered for storage the tray is only 19" wide) but who wishes to spread their mouse use between both left and right hands. The roughly 7.5" by 8" mousing surface will accommodate most mice but may not be suitable for use with some of the larger more specialized ergonomic mousing solutions as it has a 1/8" ridge along the rear edge that may limit the possible range of mouse movement.

The Prima Keyboard Tray is equipped with a fairly firm removable palm support, an integrated handle for ease of movement, convenient cable guides for both mouse and keyboard, and a simple flip-up single-page inline document holder

The Prima Tray is thicker than some other trays due to the inclusion of the sliding mousing surface. As a result it does elevate the keyboard higher off the keyboard arm. Users who wish to keep the keyboard and mouse as low as possible without interfering with the movement of the legs may wish to consider other options which present a lower profile.

The Ovation Sit-Stand Keyboard Tray System combines the proven quality and exceptional adjustment range of the Knape and Vogt Ovation Sit-Stand Keyboard Arm (23″ track) with the durability and low profile of ABS Plastic Low Profile Keyboard Trays. Multiple widths and depths of tray are available, permitting users to select the tray that will best accommodate their keyboard and mousing devices while still fitting within the space constraints of the workspace.

The high quality Ovation Sit-Stand Arm can comfortably meet the standing requirements for users up to 5'7". Taller users may still be able to take advantage of the product but may find that the keyboard is a bit low for standing applications. In addition, when moving to a standing position there needs to be consideration of monitor height which should also be addressed.The durable design uses a near-effortless patented "Lift-N-Lock" counterbalance mechanism to adjust an attached tray from 5.9" below to a full 8.4" above the mounting point. A Height Indicator Gauge makes adjustment easy to measure. The inclination, or "tilt," of the tray can be adjusted from a negative inclination of -15° to +10° using a large Dial-a-Tilt knob that includes an "Inclination Gauge" (allowing the user to reposition at the desired angle). The 23″ long track achieves full storage of trays up to 11" in depth. Deeper trays such as the Extra-Deep Low Profile ABS Plastic Trays can also be used but will protrude by about 2".

The curved neck of the Ovation Sit-Stand Keyboard Tray System enables a much higher degree of elevation for the keyboard tray than the standard arm options. However, the arc of the arm does drop it down further below the tray which means that there is a slightly greater potential for it to come in contact with the knees, especially if the user draws the tray extremely close to themselves.

The arm swivels 360° for side to side movement and the 23" storage track allows the user to store the arm and tray out of the way when not in use. The high quality steel ball-bearing storage track has a much longer lifespan than the more common plastic glide systems used by most manufacturers and ensures years of smooth, virtually effortless storage movement.

The ABS Plastic Low Profile Trays are just 0.375" thick and are free of any surface obstructions, providing the greatest flexibility to the user in terms of arranging keyboards, mice, palm supports, etc. The rear edge has a Keyboard Guard which serves to keep both keyboard and mouse from slipping off the back edge when the tray is put in a negative inclination. It also protects the keyboard from the underside of the desk when stowing the tray (if the tray is too high, the "guard" will catch on the desk, protecting the keyboard from possible damage. Lastly, notches in this guard provide cable management for the keyboard and mouse.

Note: The Sit-Stand Keyboard Tray System will fully store trays up to 11" deep. Deeper 13" trays can also be mounted but the front 2" of the tray will project from below the desk when the Sit-Stand Arm is fully stored.

This CPU holder is storable (can slide 12" back on a 17" durable ball-bearing track) and also is equipped with a 360° swivel, making cable maintenance simple. It is available in a standard model (7356D) and also a Lockable (7366D) model. The lockable model has a chrome bar to prevent the case from sliding front to back in addition to the rubber grips on the sides of the holder which are on both models.

This is a basic foam wrist rest which attaches to all Waterloo articulating arms.

Due to the nature of this product we cannot offer our 30 day customer satisfaction guarantee on this product.