Seating

< 1 2 3 4 5 6 7 >


Salli SwingFit

by Salli



The Salli SwingFit is the only freely moving adjustable split saddle seat chair offered on the market today. It combines the concepts of upright stance and movement and provides many of the benefits currently being attributed to Standing Workstations ...



The Salli SwingFit is the only freely moving adjustable split saddle seat chair offered on the market today. It combines the concepts of upright stance and movement and provides many of the benefits currently being attributed to Standing Workstations without the need to stand throughout the day.

Note: If the concept of movement and upright stance have appeal but the cost of the Swingfit is prohibitive there is the option of considering the Swing or its economical cousin, the Salli Sway. These models offer the same movement and upright stance benefits of the SwingFit without the adjustability of the split saddle.

The unique rocking mechanism enables the seat to freely and continuously tilt or 'rock' on the left-right and front-back axis (and all angles in combination) in response to the movements of the user without any adjustments to the chair. This stimulates muscles in the abdominal and pelvic area, realizing benefits for the user similar to those which can be obtained through use of an exercise ball. It also adds to the mobility and metabolism of the lower back while still getting appropriate support from the split saddle seat design and maintaining the natural curvature of the spine.

In addition to the Swing mechanism the SwingFit offers the user the option of adjusting the width and angle of splay between the two halves of the saddle seat. This enables each person to customize chair to their specific body requirements. Although not necessary for many users it does offer extra customization that other models with the Swing mechanism do not.

Height adjustment of the gas spring lift is accomplished through a standard hand-controlled height adjustment lever. Available lift sizes and the corresponding user heights they accommodate are as follows: Short (4'0" to 5'2"), Mid (5'1" to 6'1") and Tall (5'8" to 6'5"). The SwingSeat can be purchased upholstered in either genuine leather or polyurethane faux leather, each available in a range of colours.The 5-point star base and lift are in an attractive chrome finish. The total weight of the chair is 10.9 kg (24 lb)






Models
Model #DescriptionPriceIn Stock?Buy Now
SS-SFSalli Swing Fit Chair, adjustable width divided seat, free moving tilt (front-to-back and side-to-side), medium pneumatic chrome lift, polished aluminum base, soft 65 mm casters, accommodates users up to 264 lbs (120 kg), available in Genuine Leather or Polyurethane Faux Leather CALL. $1395.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
43565H Salli Hard Standard Caster Accessory, 65 mm, for soft floors or wall-to-wall thick carpets (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair). CALL. $12.50 No
440 Salli Hard Caster Glide Accessory, converts Salli chair for stationary use, permits chair to glide when not loaded (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair). CALL. $10.00 No





PYRCH Sit-Stand Saddle Stool

by Mey Chair Systems



Straddling the PYRCH Sit-Stand Saddle Stool from Mey Chair Systems allows the user to adopt an upright stance that encourages more upper body activity, better and deeper breathing, and improved overall blood flow. The user becomes more alert and can ...



Straddling the PYRCH Sit-Stand Saddle Stool from Mey Chair Systems allows the user to adopt an upright stance that encourages more upper body activity, better and deeper breathing, and improved overall blood flow. The user becomes more alert and can enjoy greater reach and freedom of movement. The upright position also makes it easy to return to a fully standing position.

Seated on the PYRCH Saddle Stool, the user also adopts a wider stance than is possible on a leaning stool or on standard chair. The saddle stool can be positioned at any height from 26" to 35.8". It can also be tilted forward up to 15° and provides a full 360° of free rotation. This capacity for full rotation makes the PYRCH a practical solution for users who need to swivel between different work surfaces from a fixed position. When the seat pan is tilted the PYRCH can also provide a degree of leaning capability. The robust black tubular steel base provides strength and stability, with strong nylon glides that ensure secure positioning.

Note: Sitting on a saddle stool elevates a user higher than a standard seat. Saddle stools are therefore not generally recommended as a replacement for seating at a standard office desk. Please call one of our Product Specialists to discuss your intended use of the PYRCH Saddle Stool. We will be happy to help you find the best solution for your needs.







Models
Model #DescriptionPriceIn Stock?Buy Now
11300PYRCH Sit-Stand Saddle Stool.
PLEASE SEE NEW PART NO: PSS-11300 CALL.
$360.00No





HYSIIT Sit-Stand Stool

by Mey Chair Systems



The HYSIIT Sit-Stand Saddle Stool from Mey Chair Systems creates an upright posture that encourages upper body movement, better and deeper breathing, and improved overall circulation. This posture also enables greater reach and range of movement in t ...



The HYSIIT Sit-Stand Saddle Stool from Mey Chair Systems creates an upright posture that encourages upper body movement, better and deeper breathing, and improved overall circulation. This posture also enables greater reach and range of movement in the upper body, and makes it easy to return to a fully standing position.

The saddle stool design also creates a wider stance for the user, providing a secure seated position that offers relief to the joints of the legs and feet. The saddle stool tilts forward up to 15°, rotating the pelvis forward and resulting in a more natural and comfortable alignment of the back. The full 360° of free rotation enables users to swivel easily between work surfaces without the need to twist and turn at the waist. The stool can be positioned at any height from 26" to 35.8", and the easily adjusted gas cylinder creates a cushioning effect that gives slightly when the user sits down, reducing the impact on the lower back.

Self-braking castors permit the stool to roll freely but will brake when the user stands up. This practical feature ensures that the seat remains in the same position the user left it. Long-wearing woven fabric over foam padding provides a breathable seat for better comfort.

Note: Sitting on a saddle stool elevates a user higher than a standard seat. As a result, saddle stools are not generally recommended as a replacement for seating at a standard office desk. Please call one of our Product Specialists to discuss your intended use of the HYSIIT Sit-Stand Saddle Stool. We will be happy to help you select the best solution for your needs.







Models
Model #DescriptionPriceIn Stock?Buy Now
11216HYSIIT Sit-Stand Stool.
PLEASE SEE NEW PART NO: HSS-11216 CALL.
$415.00No





Salli Classic

by Salli



The Salli Classic is the most basic model of the Salli chair line, and provides the appropriate orthopedic support from the saddle seat design. The seat is a solid one-piece saddle design. A standard hand-controlled height adjustment lever for adjust ...



The Salli Classic is the most basic model of the Salli chair line, and provides the appropriate orthopedic support from the saddle seat design. The seat is a solid one-piece saddle design. A standard hand-controlled height adjustment lever for adjustment of the gas spring lift accommodates most adults. Available lift sizes and the corresponding heights they accommodate are as follows: Low (4'0" to 5'1"), Mid (5'2" to 5'11") and Tall (5'8" to 6'5"). The 5-star base and lift are available by default in an attractive chrome finish, black base and lift available by request.The total weight of the chair is 10.5 kg (23.1 lb), the seat is 7.5 kg (16.5 lb). The Salli Classic is only available by Special Order and can be purchased upholstered in either genuine leather or polyurethane faux leather, each available in a range of colours.






Models
Model #DescriptionPriceIn Stock?Buy Now
SS-CLSalli Classic Chair, non-divided i.e. solid saddle seat, medium pneumatic chrome lift, polished aluminum base, soft 65 mm casters, accommodates users up to 264 lbs (120 kg) CALL. $1185.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
43565H Salli Hard Standard Caster Accessory, 65 mm, for soft floors or wall-to-wall thick carpets (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair). CALL. $12.50 No
440 Salli Hard Caster Glide Accessory, converts Salli chair for stationary use, permits chair to glide when not loaded (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair). CALL. $10.00 No





WTRFL Sit-Stand Seat

by Mey Chair Systems



The natural flowing design of the WTRFL Sit-Stand Seat provides users with an angle-adjustable, contoured seating surface for both perching and leaning applications. The softly rounded front rises slightly to provide a "ledge" effect, keeping the use ...



The natural flowing design of the WTRFL Sit-Stand Seat provides users with an angle-adjustable, contoured seating surface for both perching and leaning applications. The softly rounded front rises slightly to provide a "ledge" effect, keeping the user securely in position on the seat. The rounded waterfall front then drops down and away, eliminating uncomfortable sharp pressure lines against the back of the legs.

The firm polyurethane foam seat is waterproof and highly resistant to cuts or punctures. Formed channels facilitate cooling air flow. Height adjustment is accomplished with a gas spring that also serves as a shock absorber by providing a cushioning effect when the user sits down. The seat angle is adjustable from 0° to 14° allowing users to choose the most comfortable position. A convenient handle is integrated into the back of the seat for ease of movement about the workspace.






Models
Model #DescriptionPriceIn Stock?Buy Now
11351WTRFL Sit-Stand Seat.
PLEASE SEE NEW PART NO: WPS-11351 CALL.
$360.00No





SEET Sit-Stand Stool

by Mey Chair Systems



The SEET Sit-Stand Stool from Mey Chair Systems is a lightweight portable leaning stool with an integrated handle and rollers for easy movement between work stations. The 16.5 pound SEET is suited more to short-term leaning or resting rather than as ...



The SEET Sit-Stand Stool from Mey Chair Systems is a lightweight portable leaning stool with an integrated handle and rollers for easy movement between work stations. The 16.5 pound SEET is suited more to short-term leaning or resting rather than as a long-term seat.

The tubular steel base supports a gas spring lift that offers seat height adjustment from 24.8" to over 33" and helps to minimize impact when the user sits down. The unique "cylinder roll" design is 12.75" wide, with a diameter of 3.5". The seat is formed from sturdy self-skinned non-absorbent polyurethane foam that is highly resistant to nicks or cuts. Deep cut ribbing on the roll provides a textured surface to facilitate airflow and helps to keep skin cool, dry and comfortable.






Models
Model #DescriptionPriceIn Stock?Buy Now
11110SEET Sit-Stand Stool, seat height range of 24.8" - 33.1".
PLEASE SEE NEW PART NO: SLS-11110 CALL.
$400.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
SFBR SAIPH Foot Brace Rail, Black Sides with Silver Bar, 22.75" W x 13.25" D x 3.75" H$40.00 Yes





Salli Twin

by Salli



The Salli Twin is the model which introduced Salli's patented split saddle seat design. This seat is designed to correctly position the user in such a way that their back is moved into an optimum upright posture. Weight is transferred onto the sittin ...



The Salli Twin is the model which introduced Salli's patented split saddle seat design. This seat is designed to correctly position the user in such a way that their back is moved into an optimum upright posture. Weight is transferred onto the sitting bones and off of soft tissue, reducing uncomfortable pressure points. The elevated seating position of the Salli Saddle naturally tilts the pelvis forward, moving the back into a corrected upright posture.

The Salli Twin's design encourages an upright stance and open core which facilitates upper-body movement and can provide many of the benefits currently being attributed to Standing Workstations without the necessity of being on one's feet throughout the day.

For cost-conscious users a more economical version of the Twin is now available. The Chin differs from the Twin only in that it has a lighter seat frame, standard (as compared to premium) components, a more limited warranty and fewer accessory and color options.

Note: If the split saddle concept appeals but you are looking for a more active sitting experience the Salli Sway, Swing and SwingFit models may be of interest as each of these offer an 'active' tilt and free-moving seat design.

Height adjustment of the gas spring lift is accomplished through a standard hand-controlled height adjustment lever. Available lift sizes and the corresponding heights they accommodate are as follows: Short (4'0" to 5'2"), Mid (5'1" to 6'1") and Tall (5'8" to 6'5"). The 5-point star base and lift are in an attractive chrome finish.The Salli Twin is only available by Special Order and can be purchased upholstered in either genuine leather or polyurethane faux leather, each available in a range of colours.






Models
Model #DescriptionPriceIn Stock?Buy Now
SS-TWSalli Twin Chair, fixed width divided seat, medium pneumatic chrome lift, polished aluminum base, soft 65 mm casters, accommodates users up to 264 lbs (120 kg) CALL. $1125.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
43565H Salli Hard Standard Caster Accessory, 65 mm, for soft floors or wall-to-wall thick carpets (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair). CALL. $12.50 No
440 Salli Hard Caster Glide Accessory, converts Salli chair for stationary use, permits chair to glide when not loaded (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair). CALL. $10.00 No





RSTMOR Sit-Stand Chair

by Mey Chair Systems



The RSTMOR Sit-Stand Chair from Mey Chair Systems is specifically designed to meet the needs of users with larger builds. Dual rectangular steel tube construction and extra-thick padding on the larger than average seat are combined with easy adjustab ...



The RSTMOR Sit-Stand Chair from Mey Chair Systems is specifically designed to meet the needs of users with larger builds. Dual rectangular steel tube construction and extra-thick padding on the larger than average seat are combined with easy adjustability to create a chair that is both functional and durable. This chair offers users the option of sitting at a greater height than traditional chairs, greatly reducing the stress which repeated sitting and standing can put on the knees. An adjustable footrest provides relaxation for the feet and lower legs. For larger users who are working in a warehouse or assembly environment with raised counters this seat can enable them to reduce the load on their legs and joints while still being able to reach the work surface. The chair also folds for storage.






Models
Model #DescriptionPriceIn Stock?Buy Now
11190RSTMOR Sit-Stand Chair.
PLEASE SEE NEW PART NO: RDPC-11190 CALL.
$705.00No





SRLYN Sit-Stand Stool

by Mey Chair Systems



The SRLYN Sit-Stand Stool from Mey Chair Systems offers users working at height-adjustable workstations the option of an elevated seat or a leaning stance. The SRLYN helps to reduce strain on the muscles of the lower back and core, and on the legs an ...



The SRLYN Sit-Stand Stool from Mey Chair Systems offers users working at height-adjustable workstations the option of an elevated seat or a leaning stance. The SRLYN helps to reduce strain on the muscles of the lower back and core, and on the legs and feet. The leaning position also minimizes the effort required to return to a fully standing position and provides users with a greater range of motion and greater reach than does a standard seated position.

The SRLYN Sit-Stand Stool features an infinitely adjustable height range from 26.4" to 35.8" and locking forward tilt adjustment from 5° up to 20°. The 14.2" wide by 12.6" deep formed polyurethane seat provides a large firm cushioned seating surface with an integrated handle for easy movement. (Note: Users under 5'6" may find this seat too high; taller users might benefit from its greater upper range which can accommodate individuals up to 6'6".)

Strong nylon glides engage the floor to ensure secure positioning of the seat. The incorporated rollers and handle enable users to move the seat easily between workstations. The unique design of the heavy-duty textured black tubular steel base maximizes stability while also greatly reducing the risk of tripping for passersby.

This ruggedly designed seat has an industrial look but would also work well in an office setting.






Models
Model #DescriptionPriceIn Stock?Buy Now
11111SRLYN Sit-Stand Stool.
PLEASE SEE NEW PART NO: SPS-11111 CALL.
$405.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
SFBR SAIPH Foot Brace Rail, Black Sides with Silver Bar, 22.75" W x 13.25" D x 3.75" H$40.00 Yes





FYLDST Folding Sit-Stand Stool

by Mey Chair Systems



The FYLDST Folding Sit-Stand Stool from Mey Chair Systems offers users the opportunity to sit or lean while working. In addition to reducing the weight load and stress on the joints of the legs, this posture also lets users quickly move back to a ful ...



The FYLDST Folding Sit-Stand Stool from Mey Chair Systems offers users the opportunity to sit or lean while working. In addition to reducing the weight load and stress on the joints of the legs, this posture also lets users quickly move back to a fully standing position with minimal effort.

Designed with portability in mind, at only 14.3 lbs the FYLDST enables users to easily move their chair with them between locations or job sites. This stool offers an extended range of seat height adjustment from 21.25" to 35.4" which will accommodate virtually every user and is rated to support 264 lbs. Heavy rectangular tube steel construction, simple folding hinges, and handwheel adjustment of seat height mean this chair will last through years of heavy use. The Formed Polyurethane fixed seat angles slightly down at 10°, providing a comfortable resting place throughout the day. The textured surface of the seat facilitates airflow and makes the seat feel softer, improving comfort.

The simple design of this model results in a rigid seating position, with the only cushioning being that of the reasonably firm formed-polyurethane seat. Users looking for more cushioning or not requiring portability may wish to consider one of the numerous other models from Mey Chair systems, with options of softer padding in the seats or gas spring cylinders for shock absorbance.






Models
Model #DescriptionPriceIn Stock?Buy Now
11044Folding Sit-Stand Industrial Infinity Stool.
PLEASE SEE NEW PART NO: FLS-F-11044 CALL.
$355.00No





< 1 2 3 4 5 6 7 >


About Us Services Manufacturers Legal Notices Privacy