Keyboard Trays

< 1 2 3 4


Ergo Keyboard Drawer

by Aidata



The Ergo Keyboard Drawer from Aidata provides users with a simple, storable keyboard and mouse workspace. The drawer is suspended from the underside of the desk and offers keyboard heights of 1.5", 2.25" and 3.25" below the desk underside. Ball-beari ...



The Ergo Keyboard Drawer from Aidata provides users with a simple, storable keyboard and mouse workspace. The drawer is suspended from the underside of the desk and offers keyboard heights of 1.5", 2.25" and 3.25" below the desk underside. Ball-bearing tracks on each side facilitate easy storage. The storable mousing surface can be configured for use on either the right or left sides.






Models
Model #DescriptionPriceIn Stock?Buy Now
KB008Ergo Keyboard Drawer$30.00Yes





3M Under Desk Keyboard Drawer

by 3M



The 3M Under Desk Keyboard Drawer from 3M provides users with a simple, storable keyboard and mouse workspace. The drawer is suspended from the underside of the desk and offers keyboard heights of 1.5", 2.25" and 3.25" below the desk underside. Ball- ...



The 3M Under Desk Keyboard Drawer from 3M provides users with a simple, storable keyboard and mouse workspace. The drawer is suspended from the underside of the desk and offers keyboard heights of 1.5", 2.25" and 3.25" below the desk underside. Ball-bearing tracks on each side facilitate easy storage. The storable mousing surface can be configured for use on either the right or left sides and includes a Precise Mouse Pad to optimize wireless mouse battery life. It also includes a removable anti-microbial treated leatherette gel palm rest.






Models
Model #DescriptionPriceIn Stock?Buy Now
KD453M Under Desk Keyboard Drawer SPECIAL ORDER ONLY. $130.00No





Wristrester

by Workrite Ergonomics



The Wristrester from WorkRite Ergonomics is designed to be placed on top of the worksurface, specifically to bridge or "straddle" across an inside 90 degree corner and thus create a usable workspace. The underside of the 5mm thick composite "tray" is ...



The Wristrester from WorkRite Ergonomics is designed to be placed on top of the worksurface, specifically to bridge or "straddle" across an inside 90 degree corner and thus create a usable workspace. The underside of the 5mm thick composite "tray" is equipped with non-skid grip strips to hold it in place with adhesive velcro tabs providing additional security. An included 8.25" square low-friction mousing surface can be placed on either the left or right. The Wristrester is equipped with a 2.25" deep x 0.75" high leatherette palm support with foam padding. It should be noted that the palm support is non-detachable.

The WristRester comes in two sizes. The smaller is 26.75" in width and 10.75" in depth. The larger unit is 29.75" in width and 12" in depth, making it suitable for bridging wider gaps. While primarily intended for bridging corners, the Wristrester can also be deployed anywhere a level keyboard and mousing surface is desired.
Note: The Wristrester cannot be mounted to an adjustable keyboard arm.






Models
Model #DescriptionPriceIn Stock?Buy Now
B144-25Wristrester, 29.75" Wide x 12.0" Deep, Midnight Black DISCONTINUED. $45.00Yes





WorkRite UB185-25 Keyboard Platform

by Workrite Ergonomics



The WorkRite UB185-25 Keyboard Platform from WorkRite Ergonomics offers users several features. The keyboard platform is formed from 0.25" thick composite, resulting in a sturdy rigid surface with minimal flex. This large 26.75" wide x 11.5" deep pla ...



The WorkRite UB185-25 Keyboard Platform from WorkRite Ergonomics offers users several features. The keyboard platform is formed from 0.25" thick composite, resulting in a sturdy rigid surface with minimal flex. This large 26.75" wide x 11.5" deep platform is equipped with a raised rear keyboard guard with built-in cable routing, a rear mouse guard/cable retainer, a detachable foam padded leatheretter palmrest, and a low-friction 8.25" square mousing surface. All of these are detachable, facilitating assembly for users requiring either a right or left mousing zone.

With the palm rest installed there is about 7.5" of depth available for the keyboard. When the palm rest is removed that depth increases to 10.25". Due to the limited depth this tray is not recommended for use with central pointing devices. It also needs to be remembered that the palm rest runs the entire width of the tray and therefore has the potential to interfere with the appropriate use of many of the specialized ergonomic mice.

NOTE: This tray can be mounted on the Ovation Low Profile Leverless Arm.
Note: Trays such as the Phenolic Extra-Deep Low Profile Tray and the Extra-Deep ABS Plastic Low Profile Tray, by Fox Bay Industries, are better suited for central pointing devices.






Models
Model #DescriptionPriceIn Stock?Buy Now
WUB185-25WorkRite CB185-25 Keyboard Platform, 26.75" Wide x 11.5" Deep, Midnight Black CLEARANCE. $80.00Yes





Heavy Duty Melamine Corner Keyboard Platform

by Workrite Ergonomics



The Heavy Duty Melamine Corner Keyboard Platform from WorkRite Ergonomics is a rigid platform designed for installation in the inside corner of most L-shaped desks. The rear corners are cut at a diagonal to permit the mounted tray to be elevated leve ...



The Heavy Duty Melamine Corner Keyboard Platform from WorkRite Ergonomics is a rigid platform designed for installation in the inside corner of most L-shaped desks. The rear corners are cut at a diagonal to permit the mounted tray to be elevated level with or above the desk surface. The large 27.75" W x 11.75" D platform is constructed of 5/8" thick melamine and edged with durable PVC trim. The additional thickness of this platform offers a rigidity that other thinner surfaces cannot provide and the greater mass aids in reducing vibration that can occur with lighter trays.

The Corner Keyboard Platform is equipped with soft leatherette over foam mouse and keyboard palm supports. The interchangeable mouse and keyboard sections can be easily removed if not desired, or interchanged for left or right-handed mousing. The convenient mouse cord clip can also be moved to the desired side. With the palm rests installed there is still about 8.75" of depth available for the keyboard. When the palm rest is removed that depth increases to the full 11.75".
NOTE: This platform can be mounted on the Ovation Low Profile Leverless Arm or the Ovation Sit-Stand Keyboard Arm.






Models
Model #DescriptionPriceIn Stock?Buy Now
CG488-25WorkRite Heavy Duty Melamine Corner Keyboard Platform, 27.75" Wide x 11.75" Deep, Grey$60.00Yes





Heavy Duty Melamine Keyboard Platform

by Workrite Ergonomics



The Heavy Duty Melamine Keyboard Platforms from WorkRite Ergonomics offer high rigidity and durability combined with comfort. The above average thickness of these platforms creates a rigidity that thinner materials cannot provide and the greater mass ...



The Heavy Duty Melamine Keyboard Platforms from WorkRite Ergonomics offer high rigidity and durability combined with comfort. The above average thickness of these platforms creates a rigidity that thinner materials cannot provide and the greater mass aids in reducing vibration that can occur with lighter trays. To ensure long life the 5/8" thick melamine platforms are edged with durable PVC trim. The Melamine Keyboard Platforms are also equipped with removable soft leatherette covered foam palm supports for comfort.

This platform is available in three models. The CB180-25 is 19" in width x 11.75" in depth, sufficient in size to accommodate a full-size keyboard or a compact keyboard and a touchpad or trackball (there is not really sufficient space for a standard mouse) or the palm support can be removed and a central pointing device could be deployed with a full-size keyboard. The CB182-25 comes in Black, is 25" in width by 11.75" in depth and is equipped with a mouse guard that can be moved to either side. The CG185-21 is wider at 27" but shallower, just 11" in depth. It does not come with a mouse guard. Both are equipped with the removable full width palm support.
NOTE: These platforms can be mounted on the Ovation Low Profile Leverless Arm or the Ovation Sit-Stand Keyboard Arm






Models
Model #DescriptionPriceIn Stock?Buy Now
CB182-25WorkRite Heavy Duty Melamine Keyboard Platform, 25" Wide x 11.75" Deep, Black$45.00Yes
CG185-21WorkRite Heavy Duty Melamine Keyboard Platform, 27" Wide x 11" Deep, Grey$50.00Yes
CB180-25WorkRite Heavy Duty Melamine Keyboard Platform, 19" Wide x 11.75" Deep, Black$40.00Yes





Prima Keyboard Tray

by KV Waterloo



The Prima Keyboard Tray from KV Waterloo is an exceptionally sturdy keyboard tray that incorporates an adjustable mousing surface which can be pivoted toward the user on either the left or right side. The rigid mousing surface easily slides to the ri ...



The Prima Keyboard Tray from KV Waterloo is an exceptionally sturdy keyboard tray that incorporates an adjustable mousing surface which can be pivoted toward the user on either the left or right side. The rigid mousing surface easily slides to the right or left as required or can even be fully stored beneath the keyboard. The ease with which the mousing surface can be re-positioned makes this tray a good selection for someone who has limited width for tray storage (with the mousing surface centered for storage the tray is only 19" wide) but who wishes to spread their mouse use between both left and right hands. The roughly 7.5" by 8" mousing surface will accommodate most mice but may not be suitable for use with some of the larger more specialized ergonomic mousing solutions as it has a 1/8" ridge along the rear edge that may limit the possible range of mouse movement.

The Prima Keyboard Tray is equipped with a fairly firm removable palm support, an integrated handle for ease of movement, convenient cable guides for both mouse and keyboard, and a simple flip-up single-page inline document holder

The Prima Tray is thicker than some other trays due to the inclusion of the sliding mousing surface. As a result it does elevate the keyboard higher off the keyboard arm. Users who wish to keep the keyboard and mouse as low as possible without interfering with the movement of the legs may wish to consider other options which present a lower profile.






Models
Model #DescriptionPriceIn Stock?Buy Now
6541DPrima Keyboard Tray$150.00Yes





< 1 2 3 4


About Us Services Manufacturers Legal Notices Privacy