The Twixt Active Seating Chair from Safco Products is intended to subtly encourage the user to actively engage their core muscles in movement through the course of the day. The Twixt is supported by a sturdy cast aluminum base equipped with a flexible ring that can compress as users lean away from the vertical, permitting the seat to tilt in any direction the user chooses. The large 15.5" diameter seat is well padded, with waterfall edges to reduce the potential of encountering pressure points from the seat edge. Users can also freely pivot a full 360° which makes it possible to turn away from a desk or workstation without the need of moving the seat. Seat height adjustment is accomplished with a gas spring cylinder, activated by a convenient release ring just below the Twixt seat. The gas spring also acts as a shock absorber to eliminate any jolts as one sits down. There are two height ranges available — the Desk-Height version which adjusts from 17" - 22" for shorter users or situations where lower seating is more suitable, and the Extended-Height model which adjusts from 22" to 31.75", making this model better suited for taller persons or for use at height adjustable sit-stand desks. The Twixt is available with either Mesh Fabric or Vinyl upholstery.

The Salli Sway is a more economical model of the premium Salli Swing model, the most freely moving split saddle seat chair offered on the market today. The Sway differs only in that it has a lighter seat frame, standard (as compared to premium) components, and only one color option.

The rocking mechanism enables the seat to freely and continuously tilt or 'rock' on the left-right and front-back axis (and all angles in combination) in response to the movements of the user without any adjustments to the chair. This stimulates muscles in the abdominal and pelvic area, realizing benefits for the user similar to those which can be obtained through use of an exercise ball. It also adds to the mobility and metabolism of the lower back while still getting appropriate support from the split saddle seat design and maintaining the natural curvature of the spine. The width of the two halves of the saddle seat are fixed and cannot adjust but the design accommodates the body types of most individuals. If an individual has very muscular or thick thighs, or minimal soft tissue (i.e. slight frame and below average weight), they may want to consider the Salli SwingFit.

Height adjustment of the gas spring lift is accomplished through a standard hand-controlled height adjustment lever. Available in Short (4'0" to 5'2") or Medium (5'1" to 5'11") only. The 5-star base and lift are in an attractive chrome finish. The total weight of the chair is 10 kg (22 lb), the seat is 7.5 kg (16.5 lb) and is available in either black leather or black polyurethane (synthetic leather).

Note: Please specify Short or Medium cylinder when ordering.

The Focal Twister Active Seat from Safco Products is a lightweight portable seat that encourages users to actively engage in subtle movements while still remaining seated. The Twister features a slightly curved base that enables continuous rocking movements in all directions. At 20" tall the Twister is suitable for use at a traditional office desk or table height. The round-edged EVA Foam seat cushion provides a comfortable seating experience, whether for just a couple of minutes or for more extended periods. The Twister is constructed with a structural polyurethane foam support column and a rubberized non-slip reinforced Nylon base.
Note: The Twister Active Seat is not designed or intended as a long-term seating solution and as such should not be considered for this application. There are numerous other traditional and alternative seating solutions much better suited for long-term sitting.

The MybTec 360° Seat Movement Module from Mey Chair Systems is a unique product that enables users to move away from static sitting by introducing movement to almost any standard office chair as well as many other seats. The MybTec Module is located directly below the seat, enabling the seat to tilt up to 15° from vertical in any direction. Users are able to achieve movement by even slight shifts of weight. The tension adjustment lever lets each user choose the level of resistance required to achieve the desired effect. The modular design of the MybTec 360° permits the module to be added to either an existing or new chair. The module fits directly over the top of the standard gas cylinder and the seat is then mounted over the top of the MybTec 360° Seat Movement Module. The standard height adjustment release lever continues to function as normal. Heavy duty steel construction ensures the the MybTec360° can provide many years of reliable movement.
Note: It should be noted that installing the MybTec 360° Seat Movement Module will change the seat height adjustment range - raising the Minimum and Maximum heights by about 3". This needs to be taken into consideration when determining the suitability of the Seat Movement Module for any user. If the seat will no longer be able to lower to a suitable height the user may require the addition of an appropriate height footrest to provide suitable support for the feet.

International office seating manufacturer Interstuhl has teamed up with GPS pioneer Garmin to take active sitting to the next level. Until now active sitting required a conscious decision to move throughout the day. Deploying seating options that naturally encourage individuals to move was done to encourage movement but still relied to a great extent on the user consciously making the effort.

Interstuhl and Garmin worked together to create the S4.0 Active Sitting Solution, a small high tech device that is attached to the underside of the seat from where it monitors and records chair movement throughout the day. The data continuously transmits either directly to a Smart watch or to a PC using the included USB antenna/receiver. The supporting app lets viewers physically see the timing, amount, degree, and direction of movements they are making throughout the day. Users create personal profiles for monitoring their movement and the APP provides reminders and recommendations for office workouts. Users are also able to customize their notifications and reminders. Registering with Interstuhl also provides access to weekly articles on the S4.0 and related topics.

The new Stance Angle Chair from Health Postures reinterprets the industry leading concepts of their original Stance Chair. Workers are once again able to enjoy the benefits of an office chair which effortlessly converts between Sitting, Kneeling and Assisted Standing. The Stance Angle Chair is the ideal seating solution for true Sit-Stand Workstations as it supplies an ergonomic "seating" solution for each style of working. Ahead of its time in addressing the requirements of the Sit-Stand working environment, the Stance has now come of age in a streamlined, more compact version—the Stance Angle.

The innovative design of the Stance Angle Chair makes it an ideal companion to sit-stand workstations, enabling workers to seamlessly transition between Sitting, Kneeling, Assisted Standing (Leaning) and Standing throughout their workday. The freedom to effortlessly move between different postures will encourage regular movement, a key factor in achieving a healthy active-working environment. Unlike traditional seating which needs to be moved out of the way when moving from sitting to standing, the Stance Angle Chair simply adapts to the desired posture, even offering a third position—"Kneeling"— which actively encourages correct spinal alignment and can aid in strengthening lower back muscles. When in the "Assisted Standing" mode it is possible to rest against the back of the Stance Angle while also reducing the load on the lower limbs and joints, further reducing overall fatigue and contributing to a higher degree of alertness and greater productivity. The Stance Angle also features easily adjustable armrests which provide support to the arms in all three positions, reducing the risk of strain to the neck and shoulders even when standing.

The ease with which the Stance Angle Chair moves between working positions removes any obstacle for those who seek to actively shift between positions throughout the day. It also facilitates greater engagement in work as circulation is increased through the increased movement, leading to a reductioin in fatigue.

The Amazone Balance saddle style chair from Score is an excellent solution for those concerned about ergonomics and who want to move away from static seating. The Amazone combines the posture-correcting benefits of a saddle seat with the "Balance" mechanism that permits the seat to continuously shift and adjust in response to movement throughout the day.

The Balance mechanism is located directly below the seat, letting the seat move and shift with any body movement. In order to accommodate diverse requirements the degree of resistance on the movement is easily adjusted with a few turns of the ring located just below the seat. This ring also doubles as a height adjustment release meaning that there is no need to reach and find a single lever when height adjustment is required, as the ring is accessible at any position.

The saddle of the Amazone Balance is a slightly narrower fit or "cut" than many other saddle seats and has a moderate pommel rise at the front. The smaller dimensions make it better suited for use by those of slender or petite builds. The narrower cut also means that it can accommodate positions higher than the 45° downward thigh angle commonly recommended for saddle sitting. This can be of value in situations such as dental care where the greater stability of a "standing" position is required while still having the supportive benefits of "sitting". The posture created by the Amazone Balance means that most individuals will find the majority of their weight supported by the chair with the balance shared between the feet.

The Amazone Balance is currently in stock with premium 2-tone Capri Blue/Black Stamskin® artificial leather for extreme durability and comfort.

The Focal Fidget Active Stool from Safco Products is a lightweight portable stool that encourages users to actively engage in subtle movements while still remaining seated. The Fidget features a slightly curved bottom plate that enables continuous rocking movements in all directions. The contoured EVA Foam seat cushion provides a comfortable seating experience, whether for just a couple of minutes or for more extended periods. The base is constructed of ABS Plastic and reinforced Nylon with a steel support column capable of supporting up to 300 lbs.

The Fidget Active Stool comes in 3 heights to serve the seating requirements of a wide range of people. The 18" and 22" models will serve most adults for sitting at a traditional office desk or table height, while the 14" model is better suited to the needs of children sitting at a lower height of table or desk.
Note: The Fidget Active Stool is not designed or intended as a long-term seating solution and as such should not be considered for this application. There are numerous other traditional and alternative seating solutions much better suited for long-term sitting.

The AirPad 3C72 Series Executive Chair from Interstuhl combines a "Body-Float" synchronous mechanism with innovative membrane technology to create a balanced, relaxing and fully supportive sitting experience. The mechanism rebalances automatically with every movement, large or small, to deliver the same gently floating experience whether the user is sitting upright and focused on a task, or reclining in the chair, deep in thought.

The seat back and head rest on this premium chair are made of a highly tensile, elastic "membrane." This semi-transparent material delivers exceptional comfort and resilient support for the entire back and neck, along with unparalleled resistance to tears and punctures. (See the link under "Additional Resources" for a video demonstration.) Permeable Micro AirPads in the membrane permit airflow that helps to moderate body temperature. The seat back features height adjustable lumbar support and adjustable counter-pressure to ensure that users of all weights are properly supported when leaning back in the chair.

The seat pan on the AirPad is tilt adjustable, with an intuitive hand-operated rolling mechanism to extend or reduce its depth (front to back). Together, these features allow users of all heights to benefit from a seat that is custom sized and optimally positioned. The seat fabric is high grade commercial polyester rated at 400 g/rm.

An even higher degree of adjustability characterizes the T-armrests on the AirPad Executive. To allow users of all builds to meet their individual needs for arm support, the "4-D" armrests are adjustable for height, width (from the inner edge of the left armrest to the inner edge of the right armrest), depth (forward and backward) and pivot (20° to the left and right).

The AirPad 3C72 Series Executive Chair is available with the membrane back in a striking contemporary white, or in a more conservative opaque black. All chairs come with double casters for soft surfaces, and a durable, polished aluminum base.

La Chaise AirPad 3C72 Series Executive de Interstuhl intègre parfaitement un mécanisme synchrone "Body-Float" avec la technologie des membranes innovante pour créer une expérience assise équilibrée, relaxante et pleinement favorable. Le mécanisme rééquilibre automatiquement avec chaque mouvement, grand ou petit, pour délivrer le même sensation de flottement douce soit que l`utilisateur est assis vertical en se concentrant sur une tâche, ou assis incliné dans la chaise, dans ses pensées intenses.

Le dossier de cette chaise excellente est fait en "membrane" souple d`élastique. Cette membrane de couleur transparente permet une liberté totale de mouvement et soutient parfaitement le dos et le cou au complèt, avec une résistance incomparable aux déchirures et perforations. (Voir le lien sous "Les Ressources Supplémentaires" pour un vidéo de démonstration.)

Des micro AirPads perméables dans la membrane permettent l`écoulement d`air qui aide la température du corps à rester idéale. Le dossier offre un support lombaire ajustable en hauteur, ainsi qu'une contrepression ajustable pour assurer que toutes les personnes de tous les poids seront completèment supportées lorsqu`ils se penchent arrière sur la chaise.

Le siège de l'AirPad peut être incliné avec un mécanisme à rouler de façon intuitive avec la main pour étendre ou réduire sont profondeur (du devant, de l`arrière). Ensemble, ces caractéristiques permettent aux utilisateurs de toutes tailles de prendre avantage d`un siège de taille personnalisée et en position idéale. Le matériau du siège est fabriqué de polyester commercial de haute qualité évalué à 400 g/rm.

Encore plus d`ajustement qui le distingue sont les accoudoirs en format T sur l'AirPad Executive. Pour permettre aux utilisateurs de tous les carrures de répondre à leurs besoins individuelles pour les accoudoirs, les accoudoirs de "4-D" sont ajustables en hauteur, en largeur (du bord intérieur de l`accoudoir gauche au bord intérieur de l`accoudoir droite), en profondeur (d'avant en arrière), et en pivot (20° à gauche et à droite).

La Chaise AirPad 3C72 Series Executive est disponible avec le dossier en membrane de couleur remarquable de blanc contemporain, ou dans un plus traditionnel noir opaque. Toutes chaises viennent avec des roulettes doubles pour la surface-molle, aussi qu`une base robuste en aluminum brillante.

The AirPad 3C42 Series Task Chair from Interstuhl combines a "Body-Float" synchronous mechanism with innovative membrane technology to create a balanced, relaxing and fully supportive sitting experience. The mechanism rebalances automatically with every movement, large or small, to deliver the same gently floating experience whether the user is sitting upright and focused on a task, or reclining in the chair, deep in thought.

The seat back on this premium chair is made of a highly tensile, elastic "membrane." This semi-transparent material delivers exceptional comfort and resilient support for the entire back, along with unparalleled resistance to tears and punctures. (See the link under "Additional Resources" for a video demonstration.) Permeable Micro AirPads in the membrane permit airflow that helps to moderate body temperature. The seat back features height adjustable lumbar support, and adjustable counter-pressure to ensure that users of all weights are properly supported when leaning back in the chair.

The seat pan on the AirPad is tilt adjustable, with an intuitive hand-operated rolling mechanism to extend or reduce its depth (front to back). Together, these features allow users of all heights to benefit from a seat that is custom sized and optimally positioned. The seat fabric is high grade commercial polyester rated at 400 g/rm.

An even higher degree of adjustability characterizes the T-armrests on the AirPad Task. To allow users of all builds to meet their individual needs for arm support, the "4-D" armrests are adjustable for height, width (from the inner edge of the left armrest to the inner edge of the right armrest), depth (forward and backward) and pivot (20° to the left and right).

The AirPad 3C42 Series Task Chair is available with the membrane back in a striking contemporary white, or in a more conservative black. All chairs come with soft-surface double casters and a durable, polished aluminum base.

L`AirPad 3C42 Series Task Chair de Interstuhl intègre parfaitement un mécanisme synchrone "Body-Float" avec la technologie des membranes innovante pour créer une expérience assise équilibrée, relaxante et pleinement favorable. Le mécanisme rééquilibre automatiquement avec chaque mouvement, grand ou petit, pour délivrer la même sensation de flottement douce soit que l`utilisateur est assis vertical en se concentrant sur la tâche en cours, ou assis incliné dans la chaise, dans ses pensées intenses.

Le dossier de cette chaise excellente est fait en "membrane" souple d`élastique. Cette membrane de couleur transparente permet une liberté totale de mouvement et soutient parfaitement le dos au complèt, avec une résistance incomparable aux déchirures et perforations. (Voir le lien sous "Les Ressources Supplémentaires" pour un vidéo de démonstration.) Des micro AirPads perméables dans la membrane permettent l`écoulement d`air qui aide la température du corps à rester idéale. Le dossier offre un support lombaire ajustable en hauteur, ainsi qu'une contrepression ajustable pour assurer que toutes les personnes de tous les poids seront completèment supportées lorsqu`ils se penchent arrière sur la chaise.

Le siège de l'AirPad peut être incliné avec un mécanisme à rouler de façon intuitive avec la main pour étendre ou réduire sont profondeur (du devant, de l`arrière). Ensemble, ces caractéristiques permettent aux utilisateurs de toutes tailles de prendre avantage d`un siège personnalisé et en position idéale. Le matériau du siège est fabriqué de polyester commercial de haute qualité évalué à 400 g/rm.

Encore plus d`ajustement qui le distingue sont les accoudoirs en format T sur l'AirPad Task. Pour permettre aux utilisateurs de tous les carrures de répondre à leurs besoins individuels pour les accoudoirs, les accoudoirs de "4-D" sont ajustables en hauteur, en largeur (du bord intérieur de l`accoudoir gauche au bord intérieur de l`accoudoir droite), en profondeur (d'avant en arrière), et en pivot (20° à gauche et à droite).

La Chaise AirPad 3C42 Series Task est disponible avec le dossier en membrane de couleur remarquable de blanc contemporain, ou dans un plus traditionnel noir opaque. Toutes les chaises viennent avec des roulettes doubles pour la surface molle, aussi qu`une base robuste en aluminum brillante.