The Posturite Mouse Rest supports the weight of the mousing forearm in situations where chair arm rests may not be able to be raised high enough to offer the necessary support, or may not even be present. The leatherette-covered, 8.7" deep by 7.5" wi ...
The Posturite Mouse Rest supports the weight of the mousing forearm in situations where chair arm rests may not be able to be raised high enough to offer the necessary support, or may not even be present. The leatherette-covered, 8.7" deep by 7.5" wide support is comfortably padded to reduce the potential for pressure points on the forearm. A convenient clamp-free mounting system (designed for use on desk tops approximately 1" thick) lets the Mouse Rest be repositioned easily, or removed as needed, allowing users to switch between their right and left hands for mousing. The off-centre mount also enables users to configure the Posturite Mouse Rest with either 2" or 3.5" of desk overlap--permitting them to customize it to their forearm length or to their desired usage style.
Caution: The Posturite Mouse Rest elevates the forearm up to .75" over the desk height. Be sure to take this measurement into consideration when establishing the correct height for seating.
ErgoRest Forearm Supports have set the industry standard for articulating forearm supports for decades. They provide effortless flowing movement in a horizontal two-dimensional plane while providing the necesssary weight bearing to reduce strain and ...
ErgoRest Forearm Supports have set the industry standard for articulating forearm supports for decades. They provide effortless flowing movement in a horizontal two-dimensional plane while providing the necesssary weight bearing to reduce strain and fatigue. Their unique design makes them suitable for both office and industrial applications.
ErgoRest ESD models are designed to prevent electrostatic discharge (ESD), making them ideal for the electronics industry or any application where ESD needs to be prevented. The standard ESD-Rated Forearm Support can be adjusted from level with the mounting surface up to three inches above. An ESD-Rated ErgoRest Forearm Support that includes extension poles is also available. This model includes two extension poles measuring 4" and 8" that can be used to adjust the height of the arm support to any point ranging from 2.25" to 17.5" above the worksurface or mounting point. The ErgoRest permits infinite adjustment within this almost 15.25" range. The installation and removal of the height extensions can be performed with the ErgoRest mounted in place.
When the prevention of electrostatic discharge is not a requirement consideration should be given to the Standard ErgoRest Forearm Support which is available at a significantly lower cost.
Note: Due to the nature of this product we cannot offer our 30 Day Customer Satisfaction Guarantee.
Les ErgoRest Forearm Supports ont établis la norme industrielle des appuis bras pour des dizaines d`années. Ils offrent le mouvement coulant, sans effort, dans une plane horizontale deux dimensions, qui donne à l`utilisateur la possibilité de bouger doucement entre le clavier et la souris sans arrêt de support. Leurs concepts unique leur fonts bien adaptés pour un application de bureaux ou industriel.
Le modèle ESD est conçu pour éviter le décharge électrostatique (ESD), ce qui leur fonts bien adaptés pour les applications de bureaux ou industriel lorsque la prévention d`ESD est voulu. L`appui bras standard ESD-Rated peut être ajusté à partir de la même hauteur du bureau, jusqu`à trois pouces au-dessus le bureau. L`appui bras ESD-Rated est aussi disponible avec des pôles d`extension de 10 et 20 cm qui peuvent être utiliser pour ajuster la hauteur de l`appui bras jusqu`à 30cm au-dessus le bureau. L`instalation du ErgoRest permet l`ajustement infini entre la gamme de ce 30cm. L`instalation et le démontage des pôles d`extension peuvent être fait avec l`ErgoRest en place.
Une surface pour la souris est disponible comme accessoire optionnel. La surface pour la souris est accrocher sur un poteau sur la base du pince (clamp) et peut être tournée devant, plus proche de l`utilisateur, ou derrière et au-dessus du bureau. (Veuillez noter: la surface le la souris va être 1.5po plus haut que le bureau.)
The Vertebral-Soft Arm Support was designed to address several of the issues associated with extended computer use. Traditional keyboard and mouse usage tends to place the weight of the forearms in front of the body, putting a continuous level of str ...
The Vertebral-Soft Arm Support was designed to address several of the issues associated with extended computer use. Traditional keyboard and mouse usage tends to place the weight of the forearms in front of the body, putting a continuous level of stress on the shoulders and the back vertebrae. The Vertebral-Soft addresses this by providing a unique arm support bar that is adjustable in both height and depth. This enables users to position it at the ideal comfort spot to maintain optimum support for the arms, transferring the imbalanced weight onto the arm support bar that is attached to the desk. When optimally positioned the Vertebral-Soft Arm Support can also ensure that the wrists are not permitted to drop into a position of extension, a risk factor for development of Carpal Tunnel Syndrome.
The Vertebral-Soft Arm Support is constructed of heavy gauge steel that ensures rigidity and durability. The keyboard and right-hand mousing surface is 26.75" wide by 12" deep, and comes with a matching pad that provides comfort as well as serving as a low-friction mousing surface. The integrated arm 2.5" deep support bar extends 2.75" from the front edge of the desk when stored and can be extended as far as 9.75", depending on they type of arm support desired. The bar can be set for positioning level, above, or below the mounting surface. Note: This is a new unit but one of the four pressure plates for mounting is missing. This does not affect the usage as even a thin piece of rigid plastic will serve as a replacement.