Manufacturers

McCarty's Sacroease

Search By:

McCarty's Sacroease

< 1 2


Executive RX Seat

by McCarty's Sacroease



Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office c ...



Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames the seat. Over this frame is stretched a wide rubber band that serves to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which permits users to customize for optimum comfort.

As a "Seat Only" model the Executive RX Seat is designed for chairs that offer good back support but lack a comfortable seating surface. This modified seat is designed to fit larger chairs and to provide a higher degree of cushioning than most of the other Sacre-Ease models. The seat is both wider and deeper than other models to better fit larger chairs and the 2" thick poly foam cushion provides firm support across the entire seat. A 3.5" wide x 11" deep "foam-free" Coccyx cutout provides pressure relief for those suffering from tailbone injuries or other conditions that generate similar sensitivity to pressure. The Executive RX is built on a 17" x 17" steel frame, with shock absorbing rubber band support and a full two inches of poly foam cushioning, all covered with a breathable, durable fabric. The non-skid underside keeps it firmly in place on the chair. Like other Sacro-Ease Seat Supports, the Executive RX Seat has a carry-handle, and can be used in virtually all seating situations.






Models
Model #DescriptionPriceIn Stock?Buy Now
EX-RX-BLKBlack model.$200.00Yes
EX-RXColours Available: Blue, Grey, Brown, Red, Light Brown, Charcoal. SPECIAL ORDER ONLY. $180.00No





Memory Foam RX Seat

by McCarty's Sacroease



Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office c ...



Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames the seat. Over this frame is stretched a wide rubber band that serves to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which permits users to customize for optimum comfort.

This modified seat is padded with a 1" thick layer of Comfort Memory Foam and features a 2.5" wide x 9" deep "foam-free" Coccyx cutout that provides pressure relief for those suffering from tailbone injuries or other conditions that generate similar sensitivity to pressure. The 15" W x 15" D seat will fit the majority of chairs or vehicle seats. As with other Sacro-Ease models, this Coccyx cutout version includes the primary steel base and rubber band structure with a cover of high quality durable upholstery.

The underside of the seat features a durable, non-skid bottom that keeps the Sacro-Ease firmly in place on all seats. A convenient handle facilitates transport between locations. It is stocked in the standard 15" seat width but is also available by Special Order in a 12" width that works with narrower bucket seats or a 19" width for bench seats or larger users. Deeper seats are also available by Special Order.






Models
Model #DescriptionPriceIn Stock?Buy Now
RSC-RX-CF-BLKBlack Model$195.00Yes





Memory Foam Tapered Sacro-Ease Seat Support

by McCarty's Sacroease



Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office c ...



Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames the seat. Over this frame is stretched a wide rubber band that serves to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which permits users to customize for optimum comfort.

The Memory Foam Tapered Sacro-Ease Seat Support offers the highest degree of cushioning and comfort of any Sacro-Ease product. This "Seat Only" model is wedge-shaped to "fill" the dip that exists at the rear of many auto and truck seats. The tapered seat design also offers ergonomic benefits by elevating the hips which in turn helps to tilt the pelvis forward and restore the natural C-Curve of the spine. When correctly aligned the spine is able to better absorb impact and is also less susceptible to injury.

As with other Sacro-Ease models, this tapered seat version includes the primary steel base and rubber band structure with a cover of high quality durable upholstery. The wedge-shaped seat tapers from 1" thick at the front to 3" thick at the rear. The seat cushion is comprised of two layers, the upper being a 1" layer of high quality Visco-Elastic Comfort Memory Foam that offers superior cushioning and vibration damping. The Memory Foam also contours to the body to aid in reducing potential pressure points. The upper layer of Memory foam is supported by an underlying wedge of high density poly foam that tapers up to 2" thick at the rear. The combined rear thickness of 3" is ideal cushioning for applications where extremely rough conditions are experienced

The underside of the seat features a durable, non-skid bottom that keeps the Sacro-Ease firmly in place on all seats. A convenient handle facilitates transport between locations. It is stocked in the standard 15" seat width but is also available by Special Order in a 12" width that works with narrower bucket seats or a 19" width for bench seats or larger users. The RSCTW-18-SPECIAL-BLK (stocked) model is the standard 15" width but has an 18" deep seat for use in common fleet truck models equipped with deeper seats than most other vehicles. Other seat width and depth combinations are also available by Special Order.


Note: If this Sacro-Ease Seat Support is to be used in a vehicle with limited headroom please be aware that even when compressed this seat could elevate the user up to 2".






Models
Model #DescriptionPriceIn Stock?Buy Now
RSCTW-BLK15" Seat width. Black model$205.00Yes
RSCTW-18-SPECIAL-BLK15" Seat width. 18" DEEP, Black model. Designed for use in deep truck seats$205.00Yes
RSCTW-GREY15" Seat width. Grey model$205.00Yes
RSCTW-LTBRN15" Seat width. Light brown model SPECIAL ORDER ONLY. $205.00No
RSCTW-BRN15" Seat width. Brown model SPECIAL ORDER ONLY. $205.00No
RSCTW-BLU15" Seat width. Blue model SPECIAL ORDER ONLY. $205.00No
RSCTW-RED15" Seat width. Red model SPECIAL ORDER ONLY. $205.00No
RSCTW-CHAR15" Seat width. Charcoal model SPECIAL ORDER ONLY. $205.00No
RNCTW12" Seat width. Colours Available: Black, Grey, Light Brown; Blue, Brown, Red, Charcoal SPECIAL ORDER ONLY. $205.00No
RCTW19" Seat width. Colours Available: Black, Grey, Light Brown; Blue, Brown, Red, Charcoal SPECIAL ORDER ONLY. $205.00No





RX Cutout Seat

by McCarty's Sacroease



Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office c ...



Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames the seat. Over this frame is stretched a wide rubber band that serves to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which permits users to customize for optimum comfort.

As a "Seat Only" model, the RX Cutout Seat is designed for chairs that offer good back support but lack a comfortable seat. This modified seat is padded with a 1" thick layer of firm poly foam and features a 2.5" wide x 9" deep "foam-free" Coccyx cutout that provides pressure relief for those suffering from tailbone injuries or other conditions that generate similar sensitivity to pressure. The 15" W x 16" D seat will fit the majority of chairs or vehicle seats. As with other Sacro-Ease models, this Coccyx cutout version includes the primary steel base and rubber band structure with a cover of high quality durable upholstery.

The underside of the seat features a durable, non-skid bottom that keeps the Sacro-Ease firmly in place on all seats. A convenient handle facilitates transport between locations. It is stocked in the standard 15" seat width but is also available by Special Order in a 12" width that works with narrower bucket seats or a 19" width for bench seats or larger users. Deeper seats are also available by Special Order.






Models
Model #DescriptionPriceIn Stock?Buy Now
RSC-RX-BLKSacro-Ease Seat Only model, with Coccyx Cutout, Black$152.50Yes





Chair Makeover

by McCarty's Sacroease



Tired of sitting in terrible seats and getting up with a sore back? That can be a thing of the past with the Chair Makeover from McCarty's Sacroease. This unique product combines two products into a unique package. The seat is a specially contoured a ...



Tired of sitting in terrible seats and getting up with a sore back? That can be a thing of the past with the Chair Makeover from McCarty's Sacroease. This unique product combines two products into a unique package. The seat is a specially contoured and molded Visco Memory Foam (17" W X 16" D) designed to optimize your sitting comfort while the 24" H X 17" W back is designed with the same bendable steel frame, rubber webbing and Memory Foam as the Sacro-Ease Memory Foam Seat Support. Over all this there is a soft and flexible fabric covering available in a wide range of designer colours. The 24" high back enables you to custom bend the back to provide yourself with the lumbar and shoulder support that you require and provides a level of support not found in many office chairs. Like other Sacro-Ease Seat Supports, the Chair Makeover has a handle to enable you to transport it between locations and, also like other models, can be used in virtually all seating situations to vastly improve the back support which is so often lacking.






Models
Model #DescriptionPriceIn Stock?Buy Now
CM-BLK17" Seat width. SPECIAL ORDER ONLY. NO ETA. $325.00No
CM17" Seat width. Colours Available: Basil, Blue, Cappucino, Pebble, Chocolate, Smoke, Wine. SPECIAL ORDER ONLY. $325.00No





Sports Cover

by McCarty's Sacroease



A great way to convert your Sacro-Ease Seat Support into a stadium seat or stand alone seating. This sports cover fits most of the Sacro-Ease models (works best with units that have the twisted hinge), features a water resistant and durable fabric, a ...



A great way to convert your Sacro-Ease Seat Support into a stadium seat or stand alone seating. This sports cover fits most of the Sacro-Ease models (works best with units that have the twisted hinge), features a water resistant and durable fabric, and can easily be slipped over your Sacro-Ease Seat when you arrive at the game. When the game is over you simply carry it back to your car, slip it off and put your Sacro-Ease back in your car seat. Comfort wherever you are. No more hard, cold seating with no back support - now you can spend your time enjoying the game. Adjustable strapping enables you to allow for bulkier clothing on those cold days but still get the back support you need.

Note: This product is available only by special order. Please note we are also unable to offer our 30 Day Customer Satisfaction Guarantee on this product.






Models
Model #DescriptionPriceIn Stock?Buy Now
SSCColours Available: Black, Blue, Grey, Purple, Red, Royal Blue. SPECIAL ORDER ONLY. $115.00No





< 1 2


About Us Services Manufacturers Legal Notices Privacy