Additional Resources Accessories |
Product Summary |
---|
Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames the seat. Over this frame is stretched a wide rubber band that serves to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which permits users to customize for optimum comfort.
As a "Seat Only" model, the RX Cutout Seat is designed for chairs that offer good back support but lack a comfortable seat. This modified seat is padded with a 1" thick layer of firm poly foam and features a 2.5" wide x 9" deep "foam-free" Coccyx cutout that provides pressure relief for those suffering from tailbone injuries or other conditions that generate similar sensitivity to pressure. The 15" W x 16" D seat will fit the majority of chairs or vehicle seats. As with other Sacro-Ease models, this Coccyx cutout version includes the primary steel base and rubber band structure with a cover of high quality durable upholstery.
The underside of the seat features a durable, non-skid bottom that keeps the Sacro-Ease firmly in place on all seats. A convenient handle facilitates transport between locations. It is stocked in the standard 15" seat width but is also available by Special Order in a 12" width that works with narrower bucket seats or a 19" width for bench seats or larger users. Deeper seats are also available by Special Order. |
Ergonomic Benefits |
---|
Reduces Pressure on the Coccyx - This model of the Sacro-Ease Seat Support features a 2.5" wide x 9" deep zone without supporting foam. This reduces the potential for pressure on the Coccyx which can lead to a reduction in pain for those who may have damaged their tailbone or who may have conditions that create a similar level of pressure-induced discomfort.
Encourages Better Posture - Everywhere! - Sacro-Ease Seat Supports encourage the user to sit upright and maintain correct posture. As seats and chairs age both the springs and cushioning tend to "sag" which permits the back to round out into a C-Curve that can put extreme load on the lower back. The Seat Support restores support that has been lost from tired springs and collapsed foam.
Reduces Impact and Vibration - The shock-absorbing rubber bands in the seat serve to reduce the cumulative effect that rough roads and general vibration can have over time. Any reduction in transfer of impact or vibration to the spine is desirable to reduce the risk of damage to the cushioning discs. The firm poly foam provides support while offering cushioning and vibration damping.
Reduces Risk of Lower Back Pain - The shock-absorbing bands and cushioned seat combine to provide users with a seating option that can reduce the risk of lower back pain.
Portability Encourages Use - Because the Sacro-Ease Seat Support is easily transported via a convenient carrying handle, users have very little preventing them from taking advantage of the improved ergonomics, even if moving between multiple locations throughout the day.
Muting of Pressure Points - The rubber bands combine with the foam cushioning and the upholstery to eliminate pressure points in older seats where the foam has deteriorated to the point where it no longer provides any cushioning effect.
|
Features |
---|
- Coccyx Cutout: The RX Cutout Seat features a 2.5" wide x 9" deep cutout in the seat to provide pressure relief for those who may have pain related to tailbone injury or related conditions. This model features a 1" thick seat cushion of firm poly foam.
- Sturdy Bendable Steel Frame: A 1" wide x 1/8" thick steel frame acts as a structural foundation for the seat. With care this frame can be bent to customize for specific needs. Usually only the front edge of the seat will need to be bent (see Usage Tips) downward as needed to eliminate potential pressure points.
- Shock Absorbing Rubber Bands: The steel frame is covered with tightly-stretched wide rubber bands that serve to absorb shock and vibration, smoothing out a rough ride. When used on fixed seating these bands serve to enhance or reinforce the existing cushioning.
- Cushioned Seat: The RX Cutout Seat features a 1" thick layer of firm poly that supplements the shock-absorbing action of the foundational rubber bands. A 2.5" wide x 9" deep zone at the rear of the seat is "foam free" to aid in reducing pressure on the Coccyx area.
- Heavy Duty Upholstery: Sacro-Ease Seat Supports are upholstered with a heavy-duty fabric designed to provide many years of wear.
- Non-Slip Base: The underside of each seat features a non-slip surface that safely secures it in place on almost any surface.
- Convenient Carrying Handle: Each Sacro-Ease Seat Support is equipped with a carrying strap.
|
Images (Click on any thumbnail to view larger image) |
---|
Sacro-Ease RX Cutout Seat
|
|
Technical Specifications |
---|
|
Usage Tips |
---|
- Bending Instructions
The steel frame of this Sacro-Ease product is formed of a mild steel that permits repeated bends to be made without sacrificing the strength of the frame. Smooth gentle curves are important to ensure that the steel is not "crimped" which WILL reduce its ability to hold a new curve. Bending over a sharp edge or with abrupt movements or aggressive pressure will increase the risk of this type of damage occurring.
"Seat Only" Sacroease Products should only require bending at the very front of the seat (if at all). If you find that the front edge of the seat is creating a pressure point you may wish to put a slight downward bend at the very front edge of the frame. Bending at the front is more difficult than in the middle of the frame as it is more difficult to exert pressure at the edge. However, it can be accomplished by hooking the front edge under a lip that will be strong enough to withstand a significant degree of force. Place a sturdy tube or rod of a reasonably small (0.75" - 1") diameter directly behind the seat and gently exert pressure against the frame just above the tube or rod. It does not require a great degree of bend and you do not want to crimp the steel frame so careful steady pressure is key.
|
Models |
---|
For pricing, availability or to order this product, visit our online store. |
Model # | Description |
---|
RSC-RX-BLK | Sacro-Ease Seat Only model, with Coccyx Cutout, Black |
|