The Eureka Sit-Stand Desktop Single Arm from Eureka Ergonomic converts a fixed-height desk into a height-adjustable sit-stand desk. It is free-standing (no clamping required) and easily moved to any position on the desk. A single hand-operated releas ...
The Eureka Sit-Stand Desktop Single Arm from Eureka Ergonomic converts a fixed-height desk into a height-adjustable sit-stand desk. It is free-standing (no clamping required) and easily moved to any position on the desk. A single hand-operated release permits infinite keyboard height adjustment to any point from 0.75" - 11.75" above the mounting surface. If mounted on a 29.5" high surface this will provide a standing height suited to users up to 5'8" to 5'9". Taller users should consider other options that offer greater elevation. The upper worksurface where the display is mounted and the keyboard tray move in concert, maintaining a 5.75" difference between the two levels. In order to minimize the physical demands upon the user, adjustment is assisted by a gas spring rated up to a maximum combined rating of 30 lbs (5 on keyboard tray, 25 on worksurface). Cherry woodgrain finish and Black accents add a finishing touch to this sit-stand desk solution.
The keyboard tray features an 11" deep x 26" wide primary section that provides space for a full size keyboard and average mouse. If using a compact keyboard there is plenty of space for some speciality ergonomic mice that have larger footprints. Shallower 5.5" deep x 2.25" wide "wings" extend on both left and right sides and may provide some additional usable space for a standard mouse.
The upper worksurface is 20" deep and tapers from 31.5" W at the front to 27" at the rear. It will easily accommodate a large single monitor and may be able to support dual monitors mounted on a monitor arm (if the combined weight does not exceed the 25 lb. maximum rating. The surface provides space for multiple documents to be kept available.
The Eureka Sit-Stand Desktop Single Arm can be deployed on desks as shallow as 23". With the base at the front edge of the desk the keyboard tray will project approximately 10" when in the seated position, and about 5.5" when at the highest. On deeper desks the unit could be positioned further back to minimize the projection beyond the desk surface to just 4.5" when in the seated position.
Models
Model #
Description
Price
In Stock?
Buy Now
ERK-CV-31C
Eureka Sit-Stand Desktop Single Arm, Cherry NO 30 DAY CSG.
The StyleView Combo System with Worksurface from Ergotron is a wall-mounted sit-stand work option including monitor mounting, pull-out keyboard and mousing trays, desktop surface area and a CPU holder - everything needed within easy reach. The Style ...
The StyleView Combo System with Worksurface from Ergotron is a wall-mounted sit-stand work option including monitor mounting, pull-out keyboard and mousing trays, desktop surface area and a CPU holder - everything needed within easy reach. The StyleView has 20" of height adjustment (plus 5" of monitor adjustment) and 43" of monitor and keyboard lateral extension. In additon, the keyboard tray is back-tilted, the entire unit can be folded back via the arm and stored compactly when not in use. All surfaces are easy to clean and antimicrobial-treated. The unit also includes a medium CPU holder (3-3/8" to 8" (8.5 to 20 cm) wide; CPUs down to 2" (5 cm) wide can be accommodated by installing the included spacer within the holder).
The StyleView accommodates monitors 24" or less and has a number of weight capacities: display = 6–18 lbs (2.7–8.2 kg); worksurface = 10 lbs (4.5 kg); keyboard and mouse = 4 lbs (1.8 kg); CPU = 40 lbs (18 kg).
Models
Model #
Description
Price
In Stock?
Buy Now
45-270-026
StyleView Combo System with Worksurface, Aluminum finish
The Eureka Standing Desk Converter 36 from Eureka Ergonomic converts a fixed-height desk into a height-adjustable sit-stand "desk". With a full 36" width of upper surface there is plenty of space for documents and materials to be kept readily accessi ...
The Eureka Standing Desk Converter 36 from Eureka Ergonomic converts a fixed-height desk into a height-adjustable sit-stand "desk". With a full 36" width of upper surface there is plenty of space for documents and materials to be kept readily accessible. It is free-standing (no clamping required) and can be moved between locations without disassembly. Dual hand-operated releases permit infinite keyboard height adjustment to any point from 1.125" - 15.75" above the mounting surface. If mounted on a 29.5" high surface this will provide a standing height suited to users up to well over six feet tall. The upper worksurface and the keyboard tray move in concert, maintaining a 4.25" difference between the two levels. In order to minimize the physical demands upon the user, adjustment is assisted by a gas spring rated up to a maximum combined rating of 35 lbs (5 on keyboard tray, 30 on worksurface). Ready-to-use out of the box, the Eureka Standing Desk Converter 36 is available in a rich Cherry finish.
The keyboard tray features left and right mousing areas that are 9.4" deep x 8.3" wide with enough space (over 19") between them to accommodate a full-size keyboard. The central portion of the tray is 14" deep, enough to accommodate a keyboard and central pointing device or a laptop. A slot at the rear of the keyboard tray serves to keep a phone or tablet viewable and accessible at all times when using a keyboard.
The upper worksurface is 15.75" deep in the middle (see dimension image in the image gallery) with left and right 6.25" W areas that extend forward another 6.25" to provide additional space for documents, phone or gaming devices.The large surface can support dual monitors up to 24" diagonal placed directly on the worksurface or up to 30" diagonal when deployed using clamp mount monitor arms to provide greater adjustment.
Note: The The Eureka Standing Desk Converter 36 will NOT fit on a 24" desk unless there is at least 1.5" of clearance behind the desk. When the Eureka Standing Desk Converter 36 is at its lowest setting the upper worksurface extends 1.375 inches back beyond the base, making it best suited to installation on surfaces at least 30" in depth or where there is sufficient clearance behind the base. At the lowest setting the overall depth of the unit is 32.5" so even on a 30" deep desk the front edges of the tray will extend out about 2.5". When the unit is raised it cantilevers forward towards the user as it rises, to an overall depth of 38.375" at the highest setting, extending about 8.5" out from the front of a 30" deep mounting surface.
The Eureka Sit-Stand Desktop 46 from Eureka Ergonomic converts a fixed-height desk into a height-adjustable sit-stand "desk". Unlike smaller desktop units this 46" wide really does convert an entire desk. It is free-standing (no clamping required) an ...
The Eureka Sit-Stand Desktop 46 from Eureka Ergonomic converts a fixed-height desk into a height-adjustable sit-stand "desk". Unlike smaller desktop units this 46" wide really does convert an entire desk. It is free-standing (no clamping required) and can be moved between locations without disassembly. Dual hand-operated releases permit infinite keyboard height adjustment to any point from 1.125" - 15.75" above the mounting surface. If mounted on a 29.5" high surface this will provide a standing height suited to users up to well over six feet tall. The upper worksurface and the keyboard tray move in concert, maintaining a 4.25" difference between the two levels. In order to minimize the physical demands upon the user, adjustment is assisted by a gas springs rated up to a maximum combined rating of 35 lbs (5 on keyboard tray, 30 on worksurface). Ready-to-use out of the box, the Sit-Stand Desktop 46 is available in a professional Black finish with Cobalt Blue trim adding a finishing touch.
The keyboard tray features large 10" x 10" mousing areas on both right and left sides with enough space (19") between them to accommodate a full-size keyboard. The central portion of the tray is 14" deep and able to accommodate a laptop if desired. A slot at the rear of the keyboard tray serves to keep the largest of tablets viewable and accessible at all times when using a keyboard.
The expansive upper worksurface is 19" deep in the middle (see dimension image in the image gallery) with left and right zones that extend forward another 4.75" to provide additional space for documents, phone or gaming devices. The angular top reaches a maximum width of 46" and tapers back to 29" at the rear. With these dimensions this is one of the largest desktop sit-stand units available.The large surface can support dual monitors up to 32" diagonal, placed directly on the worksurface or deployed using clamp mount monitor arms to provide greater adjustment.
Note: The Eureka Sit-Stand Desktop 46 will NOT fit on a 24" desk unless there is at least 1.5" of clearance behind the desk. When the Eureka Sit-Stand Desktop 46 is at its lowest setting the upper worksurface extends 1.375 inches back beyond the base, making it best suited to installation on surfaces at least 30" in depth or where there is sufficient clearance behind the base. At the lowest setting the overall depth of the unit is 34.25" so even on a 30" deep desk the front edges of the tray will extend out about 4.5". When the unit is raised it cantilevers forward towards the user as it rises, to an overall depth of 41.5" at the highest setting, extending about 12" out from the front of a 30" deep mounting surface.
Models
Model #
Description
Price
In Stock?
Buy Now
ERK-CV-46B
Eureka Sit-Stand Desktop 46, Black with Cobalt Blue Trim CALL.