The WorkFit-S clamps on to the front edge of your desk and uses the Ergotron's Constant Force spring lift mechanism to assist in moving the keyboard tray, upper worksurface and monitor through the range of motion. The vertical adjustment range is 18", and the monitor mount supports independent vertical adjustment through an additional 4.8" range. The mounting surface must be between .47" and 2.4" thick for the clamp to function, and the monitor must be between 16 and 28 lbs for the LCD pivot (10° down to 20° up) to function correctly. The keyboard tray is 27" wide x 9" deep x 0.25" high, can adjust to a 7.5° negative inclination, and can support a maximum weight of 5 lbs. It can be mounted at 3 different depths which provides a 3" range of adjustment and in addition can also be positioned to either the right or left in order to centrally position the keyboard in front of the monitor. The upper worksurface is 23" wide x 15" deep x 0.25" high, with a maximum load capacity of 5 lbs.

This HD model is designed to accommodate monitor sizes up to 30" and weighing between 16 and 28 lbs can handle a maximum combined weight load (including monitor, worksurface and keyboard loads) of 29 lbs.

NOTE: It is recommended to strengthen the mounting point to prevent damage to the desktop.

The Eureka Sit-Stand Desktop Single Arm from Eureka Ergonomic converts a fixed-height desk into a height-adjustable sit-stand desk. It is free-standing (no clamping required) and easily moved to any position on the desk. A single hand-operated release permits infinite keyboard height adjustment to any point from 0.75" - 11.75" above the mounting surface. If mounted on a 29.5" high surface this will provide a standing height suited to those up to 5'8" to 5'9". Taller indivduals should consider other options that offer greater elevation. The upper worksurface where the display is mounted and the keyboard tray move in concert, maintaining a 5.75" difference between the two levels. In order to minimize the physical demands, adjustment is assisted by a gas spring rated up to a maximum combined rating of 30 lbs (5 on keyboard tray, 25 on worksurface). Cherry woodgrain finish and Black accents add a finishing touch to this sit-stand desk solution.

The keyboard tray features an 11" deep x 26" wide primary section that provides space for a full size keyboard and average mouse. If using a compact keyboard there is plenty of space for some speciality ergonomic mice that have larger footprints. Shallower 5.5" deep x 2.25" wide "wings" extend on both left and right sides and may provide some additional usable space for a standard mouse.

The upper worksurface is 20" deep and tapers from 31.5" W at the front to 27" at the rear. It will easily accommodate a large single monitor and may be able to support dual monitors mounted on a monitor arm (if the combined weight does not exceed the 25 lb. maximum rating. The surface provides space for multiple documents to be kept available.

The Eureka Sit-Stand Desktop Single Arm can be deployed on desks as shallow as 23". With the base at the front edge of the desk the keyboard tray will project approximately 10" when in the seated position, and about 5.5" when at the highest. On deeper desks the unit could be positioned further back to minimize the projection beyond the desk surface to just 4.5" when in the seated position.

The StyleView Combo System with Worksurface from Ergotron is a wall-mounted sit-stand work option including monitor mounting, pull-out keyboard and mousing trays, desktop surface area and a CPU holder - everything needed within easy reach. The StyleView has 20" of height adjustment (plus 5" of monitor adjustment) and 43" of monitor and keyboard lateral extension. In additon, the keyboard tray is back-tilted, the entire unit can be folded back via the arm and stored compactly when not in use. All surfaces are easy to clean and antimicrobial-treated. The unit also includes a medium CPU holder (3-3/8" to 8" (8.5 to 20 cm) wide; CPUs down to 2" (5 cm) wide can be accommodated by installing the included spacer within the holder).

The StyleView accommodates monitors 24" or less and has a number of weight capacities: display = 6–18 lbs (2.7–8.2 kg); worksurface = 10 lbs (4.5 kg); keyboard and mouse = 4 lbs (1.8 kg); CPU = 40 lbs (18 kg).

The Focal Brio Adjustable-Height Standing Desk from Safco Products offers workers interested in standing or leaning a compact solution that can fit even small home offices. Manual height adjustment permits it to be positioned wherever is convenient, meaning it can also serve well as a temporary work location for on-the-go notebook users. The adjustable height range also means that the Brio can serve well as a podium for multiple users, while also offering a much larger usable surface than traditional podiums.

The slight angled (3°) top is also ideal for artists or designers and works especially well for those who choose to use a leaning seat such as a Mobis, Pivot, or Twixt seat. A convenient recessed cup holder offers a secure position for beverages.

The top is supported by a steel column containing the precision height adjustment mechanism. The metal base provides a 12" deep angled footrest that encourages users to change foot positioning while standing and also works well for bracing while on a leaning seat. A single rotation of the hand crank accomplishes 1/8" of height adjustment, encouraging users to make fine height adjustments throughout the day. Small wheels in the rear and a handle below the top mean that the Brio can easily be moved between locations.

The Volante Desktop Sit-Stand Workstation from KV Waterloo can be placed on virtually any fixed-height desk to provide an instant sit-stand solution. It will fit any desk with a depth equal to or greater than the 23.2" footprint depth. This well-engineered product provides a full 13.8" of height adjustment range. Keyboard height will adjust from roughly 1" to 14.8" above the surface and the upper worksurface from 6.2" to 20". Simultaneously activating the left and right paddles facilitates height adjustment to any point throughout the entire lifting range. Gas cylinders provide lift assistance to minimize the effort required to make adjustments and the unique locking system offers infinite adjustment throughout the entire range. Regardless of the height, the Volante provides a highly stable worksurface and keyboard tray, with no detectable wobbling or movement of the mechanism. The cantilever design of the Volante means that as it rises it also moves out and towards the body, requiring one to step back and away to accommodate the new positioning.

The upper platform for monitor, tablets, or documents is 35.4" wide by 15.7" deep; while the keyboard and mouse tray is 26.4" wide by 13" deep. The keyboard tray features a tilting mechanism (±10°) that can be used to adjust the keyboard inclination and provide for optimal neutral alignment of the wrists. The 2" grommet hole at the back of the upper platform can serve as a cable guide as well as for attaching a monitor arm should greater elevation be required.

The Winston Workstation Dual from Innovative is a height-adjustable sit-stand add-on unit that can be deployed on almost any standard height fixed desk, converting it for sitting, leaning or standing. This all-in-one unit can elevate a keyboard, mouse, and other desk accessories, including two monitors, to whatever standing height is needed (up to 18.0" above desk height for the keyboard platform; up to 37.6" above desk height to the middle of the monitor).

The keyboard platform (30" W x 23" D) and monitor mount (100 x 100 mm VESA compatible) move as one unit for height adjustment* to ensure that the monitors are appropriately positioned as working positions change throughout the day. The Winston uses a heavy metal base to stabilize the unit so that it can be positioned anywhere on the surface without having to clamp or bolt it to the desk. The release lever built into the keyboard platform on the right side releases the lock so the platform, supported by a gas spring, can be moved up or down as desired with minimal effort.

Single, Triple and Quad units are also available.

*NOTE: The monitor height relative to the keyboard platform is set when the unit is assembled and is not intended to be adjusted on-the-fly while in use. However, should such a change be required, it can be readjusted by disassembling the monitor bar clamp and reassembling at a different height.

Le Winston Workstation Dual d`Innovative est un produit assis-debout réglable en hauteur qui transforme presque n'importe quel bureau assis-seulement en bureau assis-debout. Cette unité tout-en-un permet d'élever un clavier, une souris ou d`autres accessoires de bureau, y compris deux moniteurs, à la hauteur nécessaire pour se tenir debout (jusqu`à 17po au-dessus du bureau pour la plateforme du clavier; et jusqu`à 40po au dessus du bureau à partir du milieu du moniteur).

La plateforme du clavier (30po Largeur x 18po Profondeur) et le support de l'écran (100 x 100 mm compatible avec VESA) se déplace ensemble en un morceau pour l`ajustement de la hauteur* optimale, que ça soit pour assis ou debout. Le Winston utilise une base en métal lourd pour stabiliser l'unité de manière à ce qu'elle puisse être positionnée n'importe où sur le bureau sans avoir besoin de la faire fixer à pince ou avec boulon. Il y a également un mécanisme de dégagement intégré dans la plateforme du clavier sur le côté droit, qui libère un verrou, de sorte que la plateforme peut ensuite être déplacée sans effort vers le haut ou vers le bas, selon les besoins.

Les modèles Single (pour un moniteur), Triple (pour trois) et Quad (pour quatre) sont aussi disponibles.

*Veuillez noter: La hauteur du moniteur par rapport à la plateforme du clavier est réglée lorsque l`unité est assemblée. Il n`est pas conçu à être ajustée vite fait, sans effort, pendant l`utilisation. Elle peut être réajustée en démontant la pince du moniteur et en la remontant à la hauteur nécessaire.

The Workfit-T Sit-Stand Desktop Workstation from Ergotron converts any stationary desk into a sit-stand desk. This fully pre-assembled unit is ready to be used right out of the box and requires no assembly. It has a small enough footprint to fit on most workstations and still has a large enough worksurface (35" x 25") to accommodate up to 2 monitors (with stands) and other office items, such as documents, calculators, etc.

The height-adjustable mechanism of the Workfit-T is designed to move the worksurface and keyboard straight up or down, unlike other designs which force workers to step back as the platform elevates. This design also helps make the unit more stable, especially at the higher settings.

The keyboard tray is 25" wide by 9" deep and is situated 4.5" below the worksurface. The Workfit-T can handle weights up to 35 lbs and has a lift range of 15".

The Freedom Desk from Ergotech Group converts any sitting desk into a versatile sit-stand desk with ample workspace (up to 2 monitors), including a separate lower keyboard and mousing area. This freestanding unit has a spring-assisted lift mechanism for effortlessly moving monitors, work documents, keyboard, and mouse into 10 different height positions up to 14.5" above the worksurface it is placed upon. Holding up to 35 lbs of weight, the lift strength of the Freedom Desk can also be finely adjusted so that it keeps any devices on the desk safe and sturdy whether moving up or down. In addition, a simple single-handed release mechanism offers almost effortless height adjustment.

Available in black colour.

The WorkFit-S clamps on to the front edge of your desk and uses the Ergotron's Constant Force spring lift mechanism to assist in moving the keyboard tray, upper worksurface and monitor through the range of motion. The overall vertical adjustment range is 18", and the monitor mount can be independently adjusted through an additional 4.8" range. The mounting surface must be between .47" and 2.4" thick for the clamp to function, and the monitor must be between 6 and 16 lbs for the LCD pivot (10° down to 20° up) to function correctly. The keyboard tray is 27" wide x 9" deep x 0.25" high, can adjust to a 7.5° negative inclination, and can support a maximum weight of 5 lbs. It can be mounted at 3 different depths which provides a 3" range of adjustment and in addition can also be positioned to either the right or left in order to centrally position the keyboard in front of the monitor. The upper worksurface is 23" wide x 15" deep x 0.25" high, with a maximum load capacity of 5 lbs.

The LD version is designed to support monitor sizes up to 24" diagonal and between 6 and 16 lbs. Total combined weight load (including Worksurface, Keyboard and Monitor loads) should not exceed 18 lbs. For monitor sizes larger than 24" diagonal or total weight loads greater than 18 lbs. the HD version of this product may be an option.

NOTE: It is recommended to strengthen the mounting point to prevent damage to the desktop.

The WorkFit-S clamps on to the front edge of your desk and uses the Ergotron's Constant Force spring lift mechanism to assist in moving the keyboard tray and monitor through the range of motion. The vertical adjustment range is 18", and the monitor mount independently can vertically adjust an additional 5". The desk edge must be between .47" and 2.4" thick for the clamp to function, and the monitor must be between 6 and 16 lbs for the LCD pivot to function correctly. The keyboard tray is 16.5" wide x 9.3" deep, and the slide-out mousing surface is 7.5" wide x 7.9" deep, and the maximum weight on the keyboard surface cannot exceed 3 lbs.

NOTE: It is recommended to strengthen the mounting point to prevent damage to the desktop.