The Angled CPU Stand from Kantek tilts your CPU to an ergonomic angle (5 positions available). The mount for the CPU stand is adjustable, enough so to be able to Accommodate most CPUs. Easy mobility is achieved through the use of swivel casters with brakes.

Telephones are often placed at the rear of a desk because of the need to have papers and other items in close proximity. However, the result is that users are required to reach to the back of the desk each time they make or answer a call. For many this results in repetitive overreaching. The Ergo Flex Phone Arm from Aidata is designed to reduce or eliminate this overreaching by permitting the phone to be brought forward (or up) into a position that brings it within the comfort zone. When extended forward to the maximum reach of 24" the phone sits about 6" above the desk surface, leaving the desk space free for papers or other equipment. The phone can also be raised up to 16" above the mounting clamp but does move away from the user as it rises. The elevated positions can be of value where sit-stand retrofits are in use by enabling users to raise the phone to be within reach while standing or leaning. The 8" x 9.5" platform is equipped with an adjustable (5" - 9" width) spring clip that will fit most phones and tilts up to 60° for easier access and viewing. The arm is also able to rotate a full 360° from the mounting point and includes built-in phone cord management.

The Deluxe CPU Stand from Kantek elevates the CPU up to 5" (12 cm) off the floor, protecting the air intake from floor dust, and positions the CD tray and disk slots at a more comfortable height. The width is adjustable using easy-grip plastic knobs, and will Accommodate CPUs of 6.5" (16.5 cm) to 9.5" (24 cm) in width. It is equipped with 4 swivel casters for easy movement. The non-skid foam pads and heavy-duty molded plastic construction ensure that your CPU is protected from damage. The Mobile CPU Stand is available in Black.

The Keyboard Drawer Underdesk SuperShelf from Kensington is a cost-effective solution where a desk surface is up to 2.5" too high for the user. Because it is a "tray" design the keyboard and mouse cannot slide or drop off of the tray but this also tightly restricts the space for keyboard and mouse. This tray provides a limited 24" width space to place a keyboard and mouse which means that it is better suited to use with a compact keyboard that has a reduced width. Cord routing guides permit cables to drop through the rear of the tray. The SuperShelf is also equipped with a removable foam palm support.

The Keyboard Drawer is equipped with a glide mechanism that permits easy storage below the desk. The mounting brackets offer four mounting heights (half-inch increments)so users can position the drawer at the height best suited to their needs. This drawer does require a minimum width of 29.5" width and 18" of depth on the underside of the desk. With the palm rest installed it can accommodate keyboards up to 9.5" in depth, 11" in depth without the palm rest. When fully deployed the tray extends about 10.5" from the front of the desk.

The Work Comfort Adjustable Tray is a multi-functional product that performs as a keyboard and mouse holder, laptop support, book easel, or general utility surface. The Work Comfort attaches to the armrests of a chair or a wheelchair, and has a wide range of adjustments to assure the most comfortable sitting position. The patented gravity based attachment mechanism requires no tools and is gentle on furniture.

The Ergo Keyboard Drawer from Aidata provides users with a simple, storable keyboard and mouse workspace. The drawer is suspended from the underside of the desk and offers keyboard heights of 1.5", 2.25" and 3.25" below the desk underside. Ball-bearing tracks on each side facilitate easy storage. The storable mousing surface can be configured for use on either the right or left sides.

The Clamp-On Power Module from Safco Products is a convenient desk-mounted accessory for users who need to have easy access to AC outlets and Ethernet Connections. This compact module will clamp to desks from 0.75" to 1.25" thick, and provides 3 desk-level grounded power outlets alongside two ethernet data connections. The steel clamp is equipped with a non-skid pad and will not damage the mounting surface. It is has an 8' long power cord, long enough to accommodate the extra length required for mounting on height adjustable desks. The Ethernet ports connect just below desk height. This module is UL and CUL listed.

The 3M Under Desk Keyboard Drawer from 3M provides users with a simple, storable keyboard and mouse workspace. The drawer is suspended from the underside of the desk and offers keyboard heights of 1.5", 2.25" and 3.25" below the desk underside. Ball-bearing tracks on each side facilitate easy storage. The storable mousing surface can be configured for use on either the right or left sides and includes a Precise Mouse Pad to optimize wireless mouse battery life. It also includes a removable anti-microbial treated leatherette gel palm rest.

The PLEIONE Mobile Pedestal File Cabinet from ErgoVerse has been designed specifically for use with height adjustable desks. The low 19" height means that it can be safely stowed beneath all except the very lowest of adjustable desks. This low height ensures that it remains clear of crossbars at the lowest of settings. The steel construction, when combined with the compact dimensions of the PLEIONE, results in an exceptionally sturdy unit.

Despite the compact dimensions the PLEIONE Mobile Pedestal File Cabinet does not sacrifice functionality. The lower drawer can be configured for either Letter or Legal-sized hanging folders. It is also equipped with a front caster that lets the drawer be fully extended without any risk of tip-over. The upper drawer can store additional office supplies or personal items and comes with a convenient pencil and stationery item insert. Both drawers move effortlessly on steel ball-bearing rails and are lockable with a single lock, ensuring security and privacy for personal or sensitive documents.

The PLEIONE is fully mobile with lockable front casters and includes a convenient front handle to make repositioning easy.