This mount extender for the 7500 Series arms from Innovative is a useful accessory for creating a sit/stand workstation where wall-mounting is impractical. It raises the mounting point of the 7500 arm by 14.0" without compromising any of the vertical or horizontal range of the arm. Both a Clamp Mount (CM) and a Through Mount (TM) are available in black (104) colour only.

NOTE: This extender arm does not include a 7500 or 7-Flex LCD arm (available separately).

NOTE: The Through Mount is the same style as the POS Innovative Arms in that you drill 4 screws into the mounting surface as opposed to a single central bolt. Bolt Mounting Pattern.

The Spring-Assisted Heavy-Duty Tilter Accessory from Innovative is ideal for situations when you are mounting one heavy or two average monitors on a single tilter, and will routinely be adjusting the tilt angle of the monitor(s). Available in black or silver.

The Switch Dual Monitor Bracket Accessory facilitates a dual monitor mount on a Deluxe LCD Monitor Mount Arm. The two monitors can be oriented horizontally (side-by-side) or vertically (stacked one over the other). Includes Quick Release adapters for easy monitor attachment and removal. For full range of motion, see details of Innovative 7500-Wing Dual Monitor Arm.

The Adjustable POS Countertop Mount from Innovative combines easy height adjustability with attractive design and durable construction for almost any retail environment. The monitor can be pivoted, turned, or locked into position for no movement. Cables are entirely hidden from view, passing through either the counter or the back exit of the mount. Weight capacity is 25 lbs or less.

The Compact POS Countertop Mount from Innovative is a durable mounting system for monitors, signature capture devices, and kiosks. Ideal for retail use, as it prevents theft and accidental tipovers. The countertop mount secures the monitor firmly to the counter and allows you to pivot and turn it to any desired angle - and lock it in position if necessary. The mount supports monitors up to 25 lbs in weight and has a fixed height of 5.5". Also, it has internal cable routing, so that cables may pass through the counter or exit behind the mount.

NOTE: The Through Mount requires you to drill 4 screws into the mounting surface as opposed to a single central bolt. Bolt Mounting Pattern

These Handle Set accessories from Innovative provide a convenient way to reposition a monitor. These robust handles are equipped with handles to either side of the monitor, giving the operator full control of positioning. This also addresses sanitary concerns in medical environments as the handles can easily be covered with disposable plastic or medical gloves.
There are two models available. The 8409 model, available in Black, is a fixed width set and will accommodate monitors up to 22" in width (left to right including the bezel). The 8291 model is an earlier adjustable design that adjusts for monitor widths from 15.3" to 20.5" in width. These weigh 7 lbs which must be added to the monitor weight when choosing a suitable monitor arm (i.e. if the monitor is 12 lbs, with the installation of the handle weighing 7 lbs, then the total weight on the arm would be 19 lbs).

The Adjustable POS Through-Counter Mount from Innovative is a durable mounting system for monitors, signature capture devices, and kiosks. Ideal for retail use, the mount secures the monitor firmly to the counter and allows you to pivot and turn it to any desired angle - and lock it in position if necessary. The mount supports monitors up to 25 lbs in weight and has an adjustable height of 7" - 36" determined by the position of the tube (which runs through the counter in the mount). Also, it has internal cable routing, so that cables pass through the counter in the tube. The mounting mechanism is VESA-monitor compatible - 75 mm & 100 mm adapters included.

NOTE: The Through Mount requires you to drill 4 screws into the mounting surface as opposed to a single central bolt. Bolt Mounting Pattern (9189-24 + 9189-12 are Special Order)

With the Dual Arm Mount from Innovative you can mount two flat panel monitor arms to a single 'Y' shaped dual mount. The Dual Arm's articulating gas arms (purchased separately) provide complete freedom of motion. The monitors float in place - simply nudge to the desired position. Position each monitor independently of the other, and quickly adjust pivot and placement as your needs change.

The Tablik Articulating Tablet Mount from Innovative will elevate an iPad or other tablet to a more ergonomic viewing position. The mount clamps to the desk for stability and can elevate a tablet up to 18.5" above the desk or extend it horizontally up to 19" from the mounting point. The dual-section arm rotates at and is hinged the base for vertical elevation. The midpoint elbow has a ratchet that locks at multiple positions. The multiple adjustment points mean the Tablik can position a tablet throughout a wide range of elevations and distances from the mounting point. The Tablik mounting plate is attached to the arm with an additional ball and socket joint that facilitates fine adjustment of the tablet to optimize screen viewing.

The Tablik uses a magnetic mount to secure the tablet. It comes with an adhesive metal disk that attaches to the back of the tablet device. Once attached the tablet can be docked and undocked effortlessly. It can support tablets weighing up to 3 lbs. An optional adapter can also be purchased to mount the Tablik to a 75mm or 100mm VESA monitor arm, in order to position the tablet beside, below or above a monitor mounted to the same arm.

The Winston Workstation Triple from Innovative is a height-adjustable sit-stand add-on unit that converts that can be deployed on almost any standard height fixed desk, converting it for sitting, leaning or standing. This all-in-one unit will raise a keyboard, mouse, or other desk accessories, including three monitors, to whatever standing height needed (up to 18.0" above desk height for the keyboard platform; up to 37.6" above desk height to the middle of the monitor). This model can accommodate three monitors up to 24" wide (not diagonal) each.

The keyboard platform (30" W x 23" D) and monitor mounts move as one unit for height adjustment* to ensure that monitors are appropriately positioned, as working positions change throughout the day. The Winston uses a heavy metal base to stabilize the unit so that it can be positioned anywhere on the desk surface without having to clamp or bolt it to the desk. The release lever built into the keyboard platform on the right side, releases the lock so the platform, supported by a gas spring, can be moved up or down as desired with minimal effort.

With appropriate accessories, the triple unit can also be upgraded to a quad unit or extended triple unit (for wider monitor sizes).

*NOTE: The monitor height relative to the keyboard platform is set when the unit is assembled and is not intended to be adjusted on-the-fly while in use. However, should such a change be required, it can be readjusted by disassembling the monitor bar clamp and reassembling at a different height.

Le Winston Workstation Triple d`Innovative est un produit assis-debout réglable en hauteur qui transforme presque n'importe quel bureau assis-seulement en bureau assis-debout. Cette unité tout-en-un permet d'élever un clavier, une souris ou d`autres accessoires de bureau, y compris trois moniteurs, à la hauteur nécessaire pour se tenir debout (jusqu`à 17po au-dessus du bureau pour la plateforme du clavier; et jusqu`à 40po au dessus du bureau à partir du milieu du moniteur). Ce modèle peut tenir trois moniteurs de jusqu`à 24po de largeur chaque.

La plateforme du clavier (30po Largeur x 18po Profondeur) et le support de l'écran (100 x 100 mm compatible avec VESA) se déplace ensemble en un morceau pour l`ajustement de la hauteur* optimale, que ça soit pour assis ou debout. Le Winston utilise une base en métal lourd pour stabiliser l'unité de manière à ce qu'elle puisse être positionnée n'importe où sur le bureau sans avoir besoin de la faire fixer à pince ou avec boulon. Le réglage de la hauteur de la plateforme du clavier est aussi simple que d'appuyer sur un bouton situé sur le côté droit de la plateforme du clavier.

Avec les accessoires appropriés, l'unité Triple peut être transformée en une unité Quad, ou dans une unité Triple Étendue (pour les moniteurs de plus grande taille).

*Veuillez noter: La hauteur du moniteur par rapport à la plateforme du clavier est réglée lorsque l`unité est assemblée. Il n`est pas conçu à être ajustée vite fait, sans effort, pendant l`utilisation. Elle peut être réajustée en démontant la pince du moniteur et en la remontant à la hauteur nécessaire.