Manufacturers

Salli

Search By:

Salli

1 2 >


Salli SwingFit

by Salli



The Salli SwingFit is the only freely moving adjustable split saddle seat chair offered on the market today. It combines the concepts of upright stance and movement and provides many of the benefits currently being attributed to Standing Workstations ...



The Salli SwingFit is the only freely moving adjustable split saddle seat chair offered on the market today. It combines the concepts of upright stance and movement and provides many of the benefits currently being attributed to Standing Workstations without the need to stand throughout the day.

Note: If the concept of movement and upright stance have appeal but the cost of the Swingfit is prohibitive there is the option of considering the Swing or its economical cousin, the Salli Sway. These models offer the same movement and upright stance benefits of the SwingFit without the adjustability of the split saddle.

The unique rocking mechanism enables the seat to freely and continuously tilt or 'rock' on the left-right and front-back axis (and all angles in combination) in response to the movements of the user without any adjustments to the chair. This stimulates muscles in the abdominal and pelvic area, realizing benefits for the user similar to those which can be obtained through use of an exercise ball. It also adds to the mobility and metabolism of the lower back while still getting appropriate support from the split saddle seat design and maintaining the natural curvature of the spine.

In addition to the Swing mechanism the SwingFit offers the user the option of adjusting the width and angle of splay between the two halves of the saddle seat. This enables each person to customize chair to their specific body requirements. Although not necessary for many users it does offer extra customization that other models with the Swing mechanism do not.

Height adjustment of the gas spring lift is accomplished through a standard hand-controlled height adjustment lever. Available lift sizes and the corresponding heights they accommodate are as follows: Short (4'0" to 5'2"), Intermediate (4'10" to 5'6"), Mid (5'1" to 6'1") and Tall (5'8" to 6'5"). The 5-point star base and lift are in an attractive chrome finish. The total weight of the chair is 10.9 kg (24 lb), the seat is 7.5 kg (16.5 lb), and is available in black leather. Other colours of leather or Naugasoft Surgical Vinyl are available via Special Order






Models
Model #DescriptionPriceIn Stock?Buy Now
SS-SFSalli Swing Fit Chair, adjustable width divided seat, free moving tilt (front-to-back and side-to-side), medium pneumatic chrome lift, polished aluminum base, soft 65 mm casters, accommodates users up to 264 lbs (120 kg), available in Black Leather or Black Satin Vinyl SPECIAL ORDER ONLY$1235.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
43565H Salli Hard Standard Caster Accessory, 65 mm, for soft floors or wall-to-wall thick carpets (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$9.25 Yes
440 Salli Hard Caster Glide Accessory, converts Salli chair for stationary use, permits chair to glide when not loaded (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$7.50 Yes





Salli Sway

by Salli



The Salli Sway is a more economical model of the premium Salli Swing model, the most freely moving split saddle seat chair offered on the market today. The Sway differs only in that it has a lighter seat frame, standard (as compared to premium) compo ...



The Salli Sway is a more economical model of the premium Salli Swing model, the most freely moving split saddle seat chair offered on the market today. The Sway differs only in that it has a lighter seat frame, standard (as compared to premium) components, a more limited warranty and fewer accessory and color options.

The rocking mechanism enables the seat to freely and continuously tilt or 'rock' on the left-right and front-back axis (and all angles in combination) in response to the movements of the user without any adjustments to the chair. This stimulates muscles in the abdominal and pelvic area, realizing benefits for the user similar to those which can be obtained through use of an exercise ball. It also adds to the mobility and metabolism of the lower back while still getting appropriate support from the split saddle seat design and maintaining the natural curvature of the spine. The width of the two halves of the saddle seat are fixed and cannot adjust but the design accommodates the body types of most individuals. If an individual has very muscular or thick thighs, or minimal soft tissue (i.e. slight frame and below average weight), they may want to consider the Salli SwingFit.

Height adjustment of the gas spring lift is accomplished through a standard hand-controlled height adjustment lever. Available lift sizes and the corresponding heights they accommodate are as follows: Short (4'0" to 5'2"), Mid (5'1" to 6'1") and Tall (5'8" to 6'5"). The 5-star base and lift are in an attractive chrome finish. The total weight of the chair is 10 kg (22 lb), the seat is 7.5 kg (16.5 lb) and is available in either black leather or black polyurethane (synthetic leather).






Models
Model #DescriptionPriceIn Stock?Buy Now
SSCSY-L1-000Salli Sway with Black Leather Seat, fixed width divided seat, free moving tilt (front-to-back and side-to-side), medium pneumatic chrome lift, polished aluminum base, soft 65 mm casters, accommodates users up to 264 lbs (120 kg)$790.00Yes
SSCSY-P1-000Salli Sway with Black Polyurethane Seat, fixed width divided seat, free moving tilt (front-to-back and side-to-side), medium pneumatic chrome lift, polished aluminum base, soft 65 mm casters, accommodates users up to 264 lbs (120 kg)$680.00Yes
Accessories
Model #DescriptionPriceIn Stock?Buy Now
440 Salli Hard Caster Glide Accessory, converts Salli chair for stationary use, permits chair to glide when not loaded (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$7.50 Yes





Salli MultiAdjuster

by Salli



The Salli MultiAdjuster features a lockable, adjustable version of Salli's patented split saddle seat design. This seat is designed to correctly position the user in such a way that their back is moved into an optimum upright posture. Weight is trans ...



The Salli MultiAdjuster features a lockable, adjustable version of Salli's patented split saddle seat design. This seat is designed to correctly position the user in such a way that their back is moved into an optimum upright posture. Weight is transferred onto the sitting bones and off of soft tissue, reducing uncomfortable pressure points. The MultiAdjuster feature permits width and splay adjustment of the independent halves and combines these features with a forward tilt option to further improve back posture for those desiring a greater forward tilt or who, in the course of their work, lean forward repeatedly or for extended periods. The infinitely variable forward tilt lowers the front of the saddle and reduces pressure in the lower pelvic region. The MultiAdjuster's design encourages an upright stance and open core which facilitates upper-body movement and can provide many of the benefits currently being attributed to Standing Workstations without the necessity of being on one's feet throughout the day.

Note: If the concept of width and splay adjustment has appeal but static sitting is not desired the SwingFit might be the solution as it features the same width/splay adjustment but combines it with a unique rocking mechanism which permits free seat movement in all directions.

Height adjustment of the gas spring lift is accomplished through a standard hand-controlled height adjustment lever. Available lift sizes and the corresponding heights they accommodate are as follows: Short (4'0" to 5'2"), Intermediate (4'10" to 5'6"), Mid (5'1" to 6'1") and Tall (5'8" to 6'5"). The 5-point star base and lift are in an attractive chrome finish. The total weight of the chair is 11.1 kg (24.4 lb).The MultiAdjuster is available in black leather. Other colours of leather or Naugasoft Surgical Vinyl are available via Special Order.






Models
Model #DescriptionPriceIn Stock?Buy Now
SS-MUSalli MultiAdjuster Chair, adjustable width divided seat, adjustable tilt (front-to-back only), medium pneumatic chrome lift, polished aluminum base, soft 65 mm casters, accommodates users up to 264 lbs (120 kg) SPECIAL ORDER ONLY$1135.00Yes
Accessories
Model #DescriptionPriceIn Stock?Buy Now
43565H Salli Hard Standard Caster Accessory, 65 mm, for soft floors or wall-to-wall thick carpets (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$9.25 Yes
440 Salli Hard Caster Glide Accessory, converts Salli chair for stationary use, permits chair to glide when not loaded (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$7.50 Yes





Salli Chin

by Salli



The Salli Chin is a more economical model of the premium Salli Twin model, and provides all the orthopedic support and benefits that come from the patented split saddle seat design. The Chin differs in that it has a lighter seat frame, standard (as c ...



The Salli Chin is a more economical model of the premium Salli Twin model, and provides all the orthopedic support and benefits that come from the patented split saddle seat design. The Chin differs in that it has a lighter seat frame, standard (as compared to premium) components, a more limited warranty and fewer accessory and color options.

The split saddle seat design maintains the natural shape of the spine, strongly influencing the user to have good posture while sitting and working. The gap allows the tailbone to 'float', minimizing soft tissue pressures and spinal loads. The width of the two halves of the saddle seat are fixed and cannot adjust but the design accommodates most individuals body types.

A standard hand-controlled height adjustment lever for adjustment of the gas spring lift accommodates most adults. Available lift sizes and the corresponding heights they accommodate are as follows: Short (4'0" to 5'2, Mid (5'1" to 6'1") and Tall (5'8" to 6'5"). The 5-point star base and lift are in an attractive chrome finish.The Salli Chin is is available in either Black Leather or Black Polyurethane (synthetic leather).






Models
Model #DescriptionPriceIn Stock?Buy Now
SSCCH-L1-000Salli Chin with Black Leather Seat, fixed width divided seat, medium pneumatic chrome lift, polished aluminum base, soft 65 mm casters, accommodates users up to 264 lbs (120 kg)$715.00Yes
SSCCH-P1-000Salli Chin with Black Polyurethane Seat, fixed width divided seat, medium pneumatic chrome lift, polished aluminum base, soft 65 mm casters, accommodates users 264 lbs (120 kg) DISCONTINUED.$605.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
43565H Salli Hard Standard Caster Accessory, 65 mm, for soft floors or wall-to-wall thick carpets (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$9.25 Yes
440 Salli Hard Caster Glide Accessory, converts Salli chair for stationary use, permits chair to glide when not loaded (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$7.50 Yes





Salli Job

by Salli



The Salli Job is a task stool designed with the needs of the manufacturing or service sectors in mind. As with other Salli models, the design of the seat is intended to promote a more upright posture and correct positioning of the spine by tilting th ...



The Salli Job is a task stool designed with the needs of the manufacturing or service sectors in mind. As with other Salli models, the design of the seat is intended to promote a more upright posture and correct positioning of the spine by tilting the pelvis forward. The shape of the seat follows the basic concept of the Salli Split Saddle Seats but in a single anatomically-moulded piece. The groove which provides separation between the two halves of the seat provides pressure relief for the tailbone and genitals and also aids in cooling by facilitating better air flow. The seat itself is a 'self-skinned' polyurethane foam which enables it to easily be wiped down or washed with a wide variety of cleaning or disinfection agents. Height adjustment of the gas spring lift is accomplished through a standard hand-controlled height adjustment lever. The Salli Job comes with a basic black nylon 5-star base and a black Medium Cylinder which is designed to accommodate users from 5'1" - 6'1". Low (Short - 4' - 5'2") and Tall (5'8" and over) cylinders are also available.

Important:The moulded polyurethane seat on the Salli Job is significantly firmer than other upholstered Salli Saddle Chairs. Due to the overall firmness most users may find that this seat is better suited to intermittent or short-term use.

Some ideal uses for this chair would be: Assembly Lines, Hair Dressers, Cashier Stations, Factory Floors, and Lab settings. The durability of the seat and it's ability to be easily cleaned are key features which make it especially suitable to these applications.

Note: If the split saddle concept appeals but you are looking for a more active sitting experience the Salli Sway, Swing and SwingFit models may be of interest as each of these offer an 'active' tilt and free-moving seat design.






Models
Model #DescriptionPriceIn Stock?Buy Now
SSCJBSalli Job task chair, PU Foam fixed width single-piece divided seat, medium pneumatic lift, soft 65 mm casters, accommodates users up to 264 lbs (120 kg) SPECIAL ORDER ONLY. NO 30 DAY CSG$430.00No





Salli Strong

by Salli



The Salli Strong is a beefed-up version (for heavier individuals up to 330 lbs) of the the Salli Tilting Twin chair. There is a lever to provide adjustment allowing the split saddle seat to be adjusted on the front-back axis, and upon releasing the l ...



The Salli Strong is a beefed-up version (for heavier individuals up to 330 lbs) of the the Salli Tilting Twin chair. There is a lever to provide adjustment allowing the split saddle seat to be adjusted on the front-back axis, and upon releasing the lever the chair will lock in that position. This makes it possible for the user to adjust the position of the seat to the optimal angle and make micro-adjustments over time as needed, and receive the appropriate orthopedic support from the split saddle seat design. The width of the two halves of the saddle seat is fixed and cannot adjust. A standard hand-controlled height adjustment lever for adjustment of the gas spring lift accommodates most adults. Available lift sizes and the corresponding heights they accommodate are as follows: Medium fits 5'1" to 6'1" (Seat height 22.5"-30") and Tall fits 5'8" and over (Seat height 25"-35"). The oversized (60 cm) 5-star base and lift are available by default in an attractive chrome finish. The total weight of the chair is 13 kg (28.6 lb), including the 9 kg (19.8 lb) seat, and is currently only stocked in a black leather (other colors and materials available by special order).






Models
Model #DescriptionPriceIn Stock?Buy Now
SS-STSalli Strong Chair, fixed width divided seat, adjustable tilt (front-to-back only), medium pneumatic chrome lift, large polished aluminum base, soft 65 mm casters, accommodates users up to 330 lbs (160 kg) SPECIAL ORDER ONLY$1090.00Yes
Accessories
Model #DescriptionPriceIn Stock?Buy Now
43565H Salli Hard Standard Caster Accessory, 65 mm, for soft floors or wall-to-wall thick carpets (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$9.25 Yes
440 Salli Hard Caster Glide Accessory, converts Salli chair for stationary use, permits chair to glide when not loaded (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$7.50 Yes





Salli Swing

by Salli



The Salli Swing is the most freely moving split saddle seat chair offered on the market today. It combines the concepts of upright stance and movement and provides many of the benefits currently being attributed to Standing Workstations without the n ...



The Salli Swing is the most freely moving split saddle seat chair offered on the market today. It combines the concepts of upright stance and movement and provides many of the benefits currently being attributed to Standing Workstations without the need to stand throughout the day.

Note: If the benefits of the Swing have appeal but the cost is prohibitive there is the option of considering its economical cousin, the Salli Sway. The Sway differs only in that it has a lighter seat frame, standard (as compared to premium) components, a more limited warranty and fewer accessory and color options.

The unique rocking mechanism enables the seat to freely and continuously tilt or 'rock' on the left-right and front-back axis (and all angles in combination) in response to the movements of the user without any adjustments to the chair. This stimulates muscles in the abdominal and pelvic area, realizing benefits for the user similar to those which can be obtained through use of an exercise ball. It also adds to the mobility and metabolism of the lower back while still getting appropriate support from the split saddle seat design and maintaining the natural curvature of the spine. The width of the two halves of the saddle seat are fixed and cannot adjust but the design accommodates the body types of most individuals. Users who feel that the full width spread of the Swing may be uncomfortably wide may wish to consider the SwingFit which offers all of the features of the Swing along with the addition of the Adjustable Width.

Height adjustment of the gas spring lift is accomplished through a standard hand-controlled height adjustment lever. Available lift sizes and the corresponding heights they accommodate are as follows: Short (4'0" to 5'2"), Intermediate (4'10" to 5'6"), Mid (5'1" to 6'1") and Tall (5'8" to 6'5"). The 5-point star base and lift are in an attractive chrome finish. The total weight of the chair is 10.9 kg (24 lb), the seat is 7.5 kg (16.5 lb), and is available in black leather. Other colours of leather or Naugasoft Surgical Vinyl are available via Special Order.






Models
Model #DescriptionPriceIn Stock?Buy Now
SS-SWSalli Swing Chair, fixed width divided seat, free moving tilt (front-to-back and side-to-side), medium pneumatic chrome lift, polished aluminum base, soft 65 mm casters, accommodates users up to 264 lbs (120 kg) SPECIAL ORDER ONLY$1095.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
43565H Salli Hard Standard Caster Accessory, 65 mm, for soft floors or wall-to-wall thick carpets (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$9.25 Yes
440 Salli Hard Caster Glide Accessory, converts Salli chair for stationary use, permits chair to glide when not loaded (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$7.50 Yes





Salli Tilting Twin

by Salli



The Salli Tilting Twin features Salli's patented split saddle seat design. This seat is designed to correctly position the user in such a way that their back is moved into an optimum upright posture. Weight is transferred onto the sitting bones and o ...



The Salli Tilting Twin features Salli's patented split saddle seat design. This seat is designed to correctly position the user in such a way that their back is moved into an optimum upright posture. Weight is transferred onto the sitting bones and off of soft tissue, reducing uncomfortable pressure points. The lever-activated Tilting feature provides a forward tilt option to further improve back posture for those desiring a greater forward tilt or who, in the course of their work, lean forward repeatedly or for extended periods.

The forward tilt lowers the front of the saddle and reduces pressure in the lower pelvic region. The Tilting Twin's design encourages an upright stance and open core which facilitates upper-body movement and can provide many of the benefits currently being attributed to Standing Workstations without the necessity of being on one's feet throughout the day.

Note: If the split saddle concept appeals but you are looking for a more active sitting experience the Salli Sway, Swing and SwingFit models may be of interest as each of these offer an 'active' tilt and free-moving seat design.

Height adjustment of the gas spring lift is accomplished through a standard hand-controlled height adjustment lever. Available lift sizes and the corresponding heights they accommodate are as follows: Short (4'0" to 5'2"), Intermediate (4'10" to 5'6"), Mid (5'1" to 6'1") and Tall (5'8" to 6'5"). The 5-point star base and lift are in an attractive chrome finish.The Salli Tilting Twin is only available by Special Order and can be ordered in a range of colours of both Leather or Naugasoft Surgical Vinyl.






Models
Model #DescriptionPriceIn Stock?Buy Now
SS-TWTSalli Twin with Tilt Chair, fixed width divided seat, adjustable tilt (front-to-back only), medium pneumatic chrome lift, polished aluminum base, soft 65 mm casters, accommodates users up to 264 lbs (120 kg) SPECIAL ORDER ONLY$1035.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
43565H Salli Hard Standard Caster Accessory, 65 mm, for soft floors or wall-to-wall thick carpets (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$9.25 Yes
440 Salli Hard Caster Glide Accessory, converts Salli chair for stationary use, permits chair to glide when not loaded (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$7.50 Yes





Salli Twin

by Salli



The Salli Twin is the model which introduced Salli's patented split saddle seat design. This seat is designed to correctly position the user in such a way that their back is moved into an optimum upright posture. Weight is transferred onto the sittin ...



The Salli Twin is the model which introduced Salli's patented split saddle seat design. This seat is designed to correctly position the user in such a way that their back is moved into an optimum upright posture. Weight is transferred onto the sitting bones and off of soft tissue, reducing uncomfortable pressure points. The elevated seating position of the Salli Saddle naturally tilts the pelvis forward, moving the back into a corrected upright posture.

The Salli Twin's design encourages an upright stance and open core which facilitates upper-body movement and can provide many of the benefits currently being attributed to Standing Workstations without the necessity of being on one's feet throughout the day.

For cost-conscious users a more economical version of the Twin is now available. The Chin differs from the Twin only in that it has a lighter seat frame, standard (as compared to premium) components, a more limited warranty and fewer accessory and color options.

Note: If the split saddle concept appeals but you are looking for a more active sitting experience the Salli Sway, Swing and SwingFit models may be of interest as each of these offer an 'active' tilt and free-moving seat design.

Height adjustment of the gas spring lift is accomplished through a standard hand-controlled height adjustment lever. Available lift sizes and the corresponding heights they accommodate are as follows: Short (4'0" to 5'2"), Intermediate (4'10" to 5'6"), Mid (5'1" to 6'1") and Tall (5'8" to 6'5"). The 5-point star base and lift are in an attractive chrome finish.The Salli Twin is only available by Special Order and can be ordered in a range of colours of both Leather or Naugasoft Surgical Vinyl.






Models
Model #DescriptionPriceIn Stock?Buy Now
SS-TWSalli Twin Chair, fixed width divided seat, medium pneumatic chrome lift, polished aluminum base, soft 65 mm casters, accommodates users up to 264 lbs (120 kg)SPECIAL ORDER ONLY$990.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
43565H Salli Hard Standard Caster Accessory, 65 mm, for soft floors or wall-to-wall thick carpets (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$9.25 Yes
440 Salli Hard Caster Glide Accessory, converts Salli chair for stationary use, permits chair to glide when not loaded (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$7.50 Yes





Salli Tilting Classic

by Salli



The Salli Tilting Classic is identical to the Tilting Twin but features a solid one-piece saddle design. There is a lever to provide adjustment allowing the solid saddle seat to be adjusted on the front-back axis, and upon releasing the lever the ch ...



The Salli Tilting Classic is identical to the Tilting Twin but features a solid one-piece saddle design. There is a lever to provide adjustment allowing the solid saddle seat to be adjusted on the front-back axis, and upon releasing the lever the chair will lock in that position. This makes it possible for the user to adjust the position of the seat to the optimal angle and make micro-adjustments over time as needed, and receive the appropriate orthopedic support from the split saddle seat design. A standard hand-controlled height adjustment lever for adjustment of the gas spring lift accommodates most adults. Available lift sizes and the corresponding heights they accommodate are as follows: Low (4'0" to 5'1"), Intermediate (4'10" to 5'6"), Mid (5'2" to 5'11") and Tall (5'8" to 6'5"). The 5-star base and lift are available by default in an attractive chrome finish, black base and lift available by request. The total weight of the chair is 11.5 kg, the seat is 8 kg, and is currently only stocked in a black leather (other colors and materials available by special order).






Models
Model #DescriptionPriceIn Stock?Buy Now
SS-CLTSalli Classic with Tilt Chair, non-divided i.e. solid saddle seat, adjustable tilt (front-to-back only), medium pneumatic chrome lift, polished aluminum base, soft 65 mm casters, accommodates users 264 lbs (120 kg) SPECIAL ORDER ONLY$1045.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
43565H Salli Hard Standard Caster Accessory, 65 mm, for soft floors or wall-to-wall thick carpets (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$9.25 Yes
440 Salli Hard Caster Glide Accessory, converts Salli chair for stationary use, permits chair to glide when not loaded (Note: Price is for 1 unit, order 5 if you want a complete set for a Salli Chair).$7.50 Yes





1 2 >


About Us Services Manufacturers Legal Notices Privacy