The Corner Conversion Kits from Fox Bay Industries are designed to convert a right angled or tightly curved inside corner into a usable work space. The steel plate creates a rigid bridge across the corner, converting an often cramped and awkward layout into an ergonomically suitable workstation. Users are now able to work turned to the corner with easy access to an expanded desk surface to both the right and left. These also provide a means of mounting an articulating keyboard arm into corners where they cannot otherwise be installed.

Fox Bay Corner Conversion Kits are available in three sizes so users can select the size that best fits their workstation and meets their requirements. The 13.5" model works well on smaller workstations where there is limited space, such as tight cubicle applications. It provides just enough of a diagonal that most users would be able to work turned to the corner or also can serve to support a corner-mount articulating keyboard tray. The larger 21" and 26" models bridge a larger space for applications where there is sufficient room in the workspace to move the user further out from the corner. They can also support the installation of a keyboard arm if desired.

This unit attaches to the underside of a desktop surface or keyboard tray, and can easily be stored when not in use. The keyboard area is foam covered and 21.75" x 10.5" (55.2 cm x 26.7 cm), and provides ample room for ergonomic keyboards or conventional keyboards and gel supports. The mouse platform is top-mounted and swivels over the 10-key pad. It is a right-hand mount (left hand mount available by special order). The useable mouse area is 9.5" x 8" (24.1 cm x 20.3 cm). A 1" (2.5 cm) keyguard helps protect your keyboard and assist in cable management. The unit is composed of a metal mounting bracket with a vinyl-coated MDF board.

If you have an arm already, compare this Hole Pattern to see if this tray can be fitted to your arm.

This tray is composed of 0.375" ABS plastic topped with 0.375" foam, which helps keep keyboards in place. The guard at the back prevents damage to keyboards when the tray is retracted and prevents the mouse from sliding off when using negative tilt. The slot cutouts for cables provide cord management. The standard hole pattern fits most articulating arms.

If you have an arm already, compare this Hole Pattern to see if this tray can be fitted to your arm.

The Personal Task Lamp from Foxbay has a streamlined, low profile design that fits any decor and blends well with any environment. The freestanding tabletop base is gray, while the stand itself has dual articulating points - at base and lamp head - that facilitate easy adjustment. It comes with a 50-watt CRI 99.5 halogen bulb that accurately renders colour for colour and a UV stable reflector.

This unit attaches to any standard keyboard arm. The keyboard area is 21.75" x 11.5" (55.2 cm x 29.2 cm), and provides ample room for ergonomic keyboards or conventional keyboards and gel supports. The usable mousing / writing surface is 8.5" x 8.5" (21.6 cm x 21.6 cm). The retractable mouse platform is mounted under the tray and pulls out from either side.

If you have an arm already, compare this Hole Pattern to see if this tray can be fitted to your arm.

The Performer Electric Table Base from Foxbay allows your entire workstation to raise and lower easily and quickly at the touch of a button, offering a practical and efficient solution for sit/stand or multiple-user workstations. A variety of configurations are available, including straight, L-shaped, and U-shaped workstations.

Only the base is included; the top from an existing desk may be used, or a work surface may be purchased separately, sized from 44" to 62" wide. The work surface can extend up to 18" longer than the base.

Features also included:

• Speed of 1.5" per second
• 25.5" of adjustment, from 24.5" to 50.0"
• Black powder-coated finish
• Leveling glide adjustment
• Integral cable management
• Load capacity of 300 lbs
• Low power consumption (3 amps)
• 24.0" cast foot

The large diameter, wide-based aluminum Tripod Laptop Stand from Foxbay is designed to withstand heavy 'on site' use. It features a spring-loaded platform allowing the user to quickly mount and secure their laptop to the stand. It is an extremely flexible field unit, whose base may be extended or retracted, allowing the user to either sit or stand.

Knobless, leverless height adjustment from 9" below to 13" above the mounting point - adjusts with ease for use in sitting or standing positions.

The hydro cylinder floats the arm for adjustment and automatically resists movement when positioned in place, allowing normal, light-force keyboard typing without drifting lower (the keyboard arm will NOT fully support weight of typing arm or support wrists at rest). Double-articulating mechanism allows lateral movement of keyboard tray. Unlimited negative or positive tilt on keyboard tray.

Allows 360° rotation at 2 pivot points, 22" (or 28") ball bearing track, track mounting area 23" (or 29") x 7". Any standard keyboard tray mounts easily to arm.

Looking for Trays? - see our Tray Category