The Standard Microdesk is a clear, plastic sloped inline workstation accessory with adjustable non-slip feet that 'straddle' the keyboard, allowing paperwork to be centrally located above the rear of the keyboard. It is made of heavy-duty plastic which provides a solid stable writing platform and doubles as a document/book holder. The Microdesk eliminates the twisting and overreaching which often results when writing to the side of the keyboard or 'over' the keyboard. The raised secondary worksurface created by the Microdesk allows access to the keyboard at all times.

The Standard Microdesk is ideal for single surface desk workstations - if the workstation includes a keyboard drawer or articulating keyboard arm and tray, consider the Step Microdesk. Two removable paper ledges (0.25" or 0.75" high) are included along with a non-slip ruler/line guide. Available in Regular (22" x 12") and Compact (17" x 12") models. [less]

[moins]

[English]

The MultiRite Writing Platform / Document Holder from Posturite is a convenient two-in-one document holder and writing slope that helps to reduce workday aches and pains by allowing you to read, write or type without risking awkward twists or turns.

Features include:

• Elegantly simple to adjust height and angle
• Single pivot point at the front and infinite one touch adjustment at the rear
• Sliding top provides 2 different working positions
• Allows you to make optimal use of your workspace
• Rubber feet ensure stability
• Available in Mini, Standard and Large sizes
[less]

[moins]

[English]

The Posturite Board Writing Platform positions and holds documents at the optimal position for correct posture with an inclination adjustment from 18° - 35° off of the vertical. This helps to prevent and relieve aches and pains including headaches, neck and back pain, shoulder fatigue and eye strain, thereby improving work efficiency. The unique magnetic facility is a thin metal plate covered with thick blotting paper and provides an ideal smooth writing surface which enables the user to securely attach documents without experiencing the discomfort of touching a metal surface with the forearm. Rubber feet on the underside of this accessory ensure stability on any worksurface. Available in Large (22.5" H x 17.5" W) and Mini (15" H x 15.75" W) models. [less]

[moins]

[English]

Traditional document holders don't work well as writing surfaces because the ledge that supports the documents gets in the way of the user's forearm during writing. The Adjustable Writing Slant Board serves as both a document holder and a writing surface because of the design of the support ledge - it's wider in the middle and tapered toward the outside edges. This freestanding slant board is very rugged with lots of adjustability.

• Easily adjustable; angle range from 0° to 70°
• Hand-crafted from strong Appleply Maple plywood
• Non-glare, low-contrast polyurethane finish
• Sets up in seconds almost anywhere and folds up flat for travel and compact storage
• Smooth writing surface is easy on your forearm and wrist
• Non-skid, non-mar rubber feet protects desktop

[moins]

[English]

The new FlexDesk 640 from Bakker Elkhuizen is the only adjustable writing surface on the market which you can pull 6.25" (15.8 cm) towards you when you want to use it and then simply slide it back up to store it when not in use. The sturdy clear acrylic design is stable and does not require any cumbersome 'feet' when the surface is extended, making no demands on your worksurface. The easel is a sturdy heavy-duty acrylic that ensures a solid smooth writing surface. A thin hard foam strip prevents documents from sliding off the surface. Finally, there is a removable storage container hidden beneath the writing surface and a heavy magnet 'lock' that will keep the easel firmly in place when positioned upward. [less]

[moins]

[English]

The Adjustable Reading Writing Incline Board by Peets Ergonomic Systems features a sculpted ledge that can accommodate left-handed and right-handed writers. The ledge has contouring that allows it to be set for left or right-handed writing, but still will accommodate a 1" thick document. The ledge can also be removed by hand (without tools) and repositioned, allowing the board to be reconfigured. If you want to permanently set the board's ledge in a particular configuration, mount the ledge and tighten the screws that hold the ledge in place (requires a Robertson screwdriver, not included). The board itself is tilt-adjustable, allowing the user to set the angle to 11 different angles (minimum 6°, maximum 57°). The board has a matte black finish. [less]

[moins]

[English]

The Step Microdesk is designed for use with keyboard drawers / trays or on split level desks. It also works well for workstations where the monitor is placed very low on the desk or for individuals with graduated lens reading glasses.

The Step Microdesk is a clear, plastic inline workstation accessory with adjustable non-slip feet that 'straddle' the keyboard, allowing paperwork to be centrally located above the rear of the keyboard. It is made of heavy-duty plastic which provides a solid stable writing platform and doubles as a document/book holder. The Microdesk eliminates the twisting and overreaching which often results when writing to the side of the keyboard or 'over' the keyboard. The raised secondary worksurface created by the Microdesk allows access to the keyboard at all times.

The Step Microdesk is ideal for multi-level workstations which include a keyboard drawer or articulating keyboard arm and tray, and has a 'notch' to allow the Step Microdesk to clear the edge of the higher worksurface. Two removable paper ledges (0.25" or 0.75" high) are included in addition to a non-slip ruler/line guide. [less]

[moins]

[English]

The Q-Doc from Bakker Elkhuizen is an elegant, solid A3 document holder suitable for supporting all kinds of documents. Using the Q-Doc improves body posture and comfort level by keeping a short view distance between document, screen and keyboard. There are five possible height settings for optimal view and alignment to screen, allowing you to store a compact keyboard underneath the surface when not in use. [less]

[moins]

[English]

The unique design of the U Slope by Ergonomic Cafe allows the document holder to transform into an A3 reading and writing slope by simply gliding the U Slope forward over the keyboard. As the design offers full clearance above the keyboard, no sacrifice on the angle of the document surface is required. Once the keyboard is needed, the U Slope simply glides back into its document holder position, and thus maximizes your desk space. The all metal design also comes with a magnetic document clip to keep pages in place and an lip attachment to hold books or documents in place while reading.

Regular Price: $295.00
Sale Price: $195.00 [less]

[moins]

[English]

The DigiMemo L2 is a stand-alone device with storage capability that digitally captures and stores everything you write or draw with ink on ordinary paper, without the use of computer or special paper. Then you can easily view, edit, organize and share your handwritten notes in Windows.

When connected to a PC, the DigiMemo L2 offers an on-line writing function which can instantly synchronize your writing on the paper with the digital page in its software in Windows. It can also double as a USB tablet in Windows. As a bonus the new L2 includes XP & Vista compatible ArioForm Lite software for basic form design.

The DigiMemo L2 provides a writing surface up to 8.5" x 11.9" but can accommodate other sizes of writing pads up to .55" thick. Accessories include a portfolio and replacement pens. OCR (Optical Character Recognition) handwriting recognition software is also available (which will convert your handwriting into text which can be imported into a word processor, instead of an image which can only be edited in an image editing program). [less]

[moins]

[English]