Table Tops

< 1 2


ThermoDesk Upsilon Table Top

by iMovR



The ThermoDesk Upsilon Table Tops from iMovR are constructed with 3/4" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped aroun ...



The ThermoDesk Upsilon Table Tops from iMovR are constructed with 3/4" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products. Finishes available include Hayward Cherry, Clove Mahogany and Light Maple woodgrains or Black, Shark Grey and Designer White solid colours. This attention to the details of construction and finish ensure that the Upsilon Table Tops will compliment any office.

ThermoDesk Upsilon table tops have dual 2.35" grommet holes and are pre-drilled to fit the iMovR UpStage 24 frame for simplified installation. (Note: ThermoDesk Upsilon tops can be installed on other sit-stand desk frames but the predrilled holes may not be usable in those applications.)






Models
Model #DescriptionPriceIn Stock?Buy Now
US-REA2447SC-NiMovR ThermoDesk Upsilon Table Top, 47" wide x 24" deep x 0.75" thick, Shaker Cherry$260.00Yes
US-REA2459H-NiMovR ThermoDesk Upsilon Table Top, 59" wide x 24" deep x 0.75" thick, Clove Mahogany$305.00Yes
Accessories
Model #DescriptionPriceIn Stock?Buy Now
IM-CMKIT-AB iMovR Advanced Cable Management Kit Accessory, Black: Includes 10 releasable 5" cable ties, 6 high tack adhesive mounting brackets (20 lb rating), 6' braided wrap around cable sleeve, 10 single use 7" cable ties, 3 supermagnet cable guides, 7 outlet power strip with surge protection and a 12' cord, 2' long cable tray$170.00 Yes
IM-CMKIT-AG iMovR Advanced Cable Management Kit Accessory, Grey: Includes 10 releasable 5" cable ties, 6 high tack adhesive mounting brackets (20 lb rating), 6' braided wrap around cable sleeve, 10 single use 7" cable ties, 3 supermagnet cable guides, 7 outlet power strip with surge protection and a 12' cord, 2' long cable tray$170.00 Yes





ThermoDesk ELLURE Tabletop

by iMovR



The ThermoDesk ELLURE Table Tops from iMovR use 3D Lamination Technology, a process which enables the production of a superior top in both appearance and quality. A wide palette of colours, including Hayward Cherry, Clove Mahogany, Light Maple and Ur ...



The ThermoDesk ELLURE Table Tops from iMovR use 3D Lamination Technology, a process which enables the production of a superior top in both appearance and quality. A wide palette of colours, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut ensure the right tone in any office environment from entry level to senior executive. This is a product where the quality matches the name.

The 1 1/8" thick high-density MDF tops are machined with softly rounded edges and corners before being vacuum-wrapped at high heat. This enables the laminate finish to be wrapped around the top and sides in one complete and seamless film, even including the grommet hole interiors which are perfectly covered and sealed. The resulting worksurface has no sharp edges or square corners and is completely non-porous, ensuring protection from damage related to humidity and exposure to liquids. Multiple layers of finish provide resistance to abrasion and damage from many common cleaning and disinfectant products. iMovR is so confident in the ThermoDesk products that they are backed with a 5 year warranty.

The tops are then pre-drilled to fit the iMovR RELEVATE frame and fitted with threaded metal inserts which ensure quick and measure-free installation with a single Phillips screwdriver. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points.

NOTE: Thermdesk Ellure tops can be installed on other sit/stand desk frames but the threaded inserts may not be useable in those applications.






Models
Model #DescriptionPriceIn Stock?Buy Now
ELLURE-3048MiMovR ThermoDesk ELLURE Tabletop, 48" wide x 30" deep x 1.125" thick, Light Maple$285.00Yes
ELLURE-3060WiMovR ThermoDesk ELLURE Tabletop, 60" wide x 30" deep x 1.125" thick, Solid Frosty White$345.00No
ELLURE-3060CiMovR ThermoDesk ELLURE Tabletop, 60" wide x 30" deep x 1.125" thick, Hayward Cherry$385.00No
ELLURE-3072HiMovR ThermoDesk ELLURE Tabletop, 72" wide x 30" deep x 1.125" thick, Clove Mahogany$670.00Yes
Accessories
Model #DescriptionPriceIn Stock?Buy Now
DUAL-AC-NODE-B iMovR Grommet-Mounted Dual-AC Power Socket Node, Black, fits 3" grommet holes, comes with 72" cord$167.50 Yes
DUAL-AC-NODE-S iMovR Grommet-Mounted Dual-AC Power Socket Node, Silver, fits 3" grommet holes, comes with 72" cord$167.50 Yes
IM-CMKIT-AB iMovR Advanced Cable Management Kit Accessory, Black: Includes 10 releasable 5" cable ties, 6 high tack adhesive mounting brackets (20 lb rating), 6' braided wrap around cable sleeve, 10 single use 7" cable ties, 3 supermagnet cable guides, 7 outlet power strip with surge protection and a 12' cord, 2' long cable tray$170.00 Yes
M-CMKIT-A iMovR Advanced Cable Management Kit Accessory, Grey: Includes 10 releasable 5" cable ties, 6 high tack adhesive mounting brackets (20 lb rating), 6' braided wrap around cable sleeve, 10 single use 7" cable ties, 3 supermagnet cable guides, 7 outlet power strip with surge protection and a 12' cord, 2' long cable tray$170.00 Yes





140H Series Radiused Corner Tabletop

by ConSet



This tabletop provides a compact radiused corner worksurface with a cutout for the user and enough real estate to allow the individual to access their full comfort zone with extra space to spare. At the edges, this shaped worksurface is 55.125" wide ...



This tabletop provides a compact radiused corner worksurface with a cutout for the user and enough real estate to allow the individual to access their full comfort zone with extra space to spare. At the edges, this shaped worksurface is 55.125" wide x 35.4375" deep, enough to provide a reasonable work area for most users. The tabletop is available in a Maple or Beech Veneer (on 0.875" thick MDF), and is Triple Coated with UV hardened lacquer with profiled lacquered rounded edges. A single grommet hole at the back of the tabletop (in the middle) assists in cable management.

To find out which bases are compatible with this tabletop, consult our base/tabletop compatibility chart.






Models
Model #DescriptionPriceIn Stock?Buy Now
140HB140H Series Radiused Corner Tabletop, Beech$260.00Yes
140HM140H Series Radiused Corner Tabletop, Maple SPECIAL ORDER ONLY$280.00No





120H Series Square Corner Tabletop

by ConSet



This tabletop is optimized for corner applications as the rear of the top is perfectly square and will snugly fit into any 90° corner. This compact corner worksurface provides a front cutout for the user and enough real estate to allow the individua ...



This tabletop is optimized for corner applications as the rear of the top is perfectly square and will snugly fit into any 90° corner. This compact corner worksurface provides a front cutout for the user and enough real estate to allow the individual to access their full comfort zone with extra space to spare. The cutout allows the user to fully support their arms while working as it permits them to move further 'in' or 'over' the tabletop.

The square sides at the back are 47.25" long, with a total width of the unit (the hypoteneuse) of 65.75". The tabletop is available in a Maple or Beech Veneer (on 0.875" thick MDF), and is Triple Coated with UV hardened lacquer with profiled lacquered rounded edges. A single grommet hole at the back of the tabletop (in the middle) assists in cable management.

To find out which bases are compatible with this tabletop, consult our base/tabletop compatibility chart.






Models
Model #DescriptionPriceIn Stock?Buy Now
120HBConset Square Corner Tabletop, MDF, Beech Veneer$320.00Yes
120HMConset Square Corner Tabletop, MDF, Maple Veneer SPECIAL ORDER ONLY$350.00No





Rectangular Center Cutout Tabletop Series

by ConSet



These tabletops are a rectangular shape with a front cutout which facilitates access to the full comfort zone of the user, by bringing them 'into' the work surface while providing full support for the arms. They are available in 3 sizes allowing one ...



These tabletops are a rectangular shape with a front cutout which facilitates access to the full comfort zone of the user, by bringing them 'into' the work surface while providing full support for the arms. They are available in 3 sizes allowing one to select the optimal amount of desktop for their needs. The work surface is 47.25" / 63" / 78.75" (120/160/200 cm) wide and 39.325" (100 cm) deep. These tabletops are available in a Beech or Maple Veneer (on 0.875" thick MDF), and are Triple Coated with UV hardened lacquer with profiled lacquered rounded edges. Two 8 cm grommet holes (one in each corner at the back of the top) assist in cable management.

To find out which bases are compatible with these tabletops, please consult this base/tabletop compatibility chart.






Models
Model #DescriptionPriceIn Stock?Buy Now
120CBRectangular Center Cutout Tabletop, 47.25" (120cm) wide x 39.375" (100cm) deep, Front Cutout, Beech Veneer over MDF DISCONTINUED$295.00Yes
120CMRectangular Center Cutout Tabletop, 47.25" (120cm) wide x 39.375" (100cm) deep, Front Cutout, Maple Veneer over MDF DISCONTINUED$340.00Yes
160CBRectangular Center Cutout Tabletop, 63" (160cm) wide x 39.375" (100cm) deep, Front Cutout, Beech Veneer over MDF DISCONTINUED$370.00No
200CBRectangular Center Cutout Tabletop, 78.75" (160cm) wide x 39.375" (100cm) deep, Front Cutout, Beech Veneer over MDF DISCONTINUED$415.00No
200CMRectangular Center Cutout Tabletop, 78.75" (160cm) wide x 39.375" (100cm) deep, Front Cutout, Maple Veneer over MDF DISCONTINUED$355.00No





L Shaped Corner 31.5-Inch Tabletops with Return

by ConSet



These tabletops provide a standard L-Shaped work surface which easily blend into most office settings and provide individuals with a familiar, conventional desk with return. The main work surface is 78.75" / 63.75" (200 cm / 160 cm) wide x 31.5" (80 ...



These tabletops provide a standard L-Shaped work surface which easily blend into most office settings and provide individuals with a familiar, conventional desk with return. The main work surface is 78.75" / 63.75" (200 cm / 160 cm) wide x 31.5" (80 cm) deep. The return side depth is 47.25" (120 cm) with the extended part of the return 23.625" (60 cm) deep. These tabletops are easily integrated into a cubicle or office workstation. The corner is rounded for the comfort of the user.

These tabletops are available in a Beech Veneer (on 0.875" thick MDF), and are Triple Coated with UV hardened lacquer with profiled lacquered rounded edges. Returns on the left and the right are available. A single grommet hole at the back of the tabletop (in the corner) assists in cable management.






Models
Model #DescriptionPriceIn Stock?Buy Now
200LB200 Series Conset L-Shaped Corner Tabletop with Return on Left, MDF, Beech DISCONTINUED$400.00Yes





117H Series Rounded Corner Tabletop

by ConSet



This tabletop is designed for corner applications as the rear of the top is square but rounded and will fit into any 90° corner. This compact corner worksurface provides a shallow front cutout for the user and enough real estate to allow the individu ...



This tabletop is designed for corner applications as the rear of the top is square but rounded and will fit into any 90° corner. This compact corner worksurface provides a shallow front cutout for the user and enough real estate to allow the individual to access their full comfort zone with extra space to spare.

The longer sides at the back are 46.0625" long, with a total depth of 35.4375". The tabletop is available in a Maple or Beech Veneer (on 0.875" thick MDF), and is Triple Coated with UV hardened lacquer with profiled lacquered rounded edges.






Models
Model #DescriptionPriceIn Stock?Buy Now
117HB117H Series Rounded Corner Tabletop, Beech Veneer$280.00Yes
117HM117H Series Rounded Corner Tabletop, Maple Veneer SPECIAL ORDER ONLY$300.00No





< 1 2


About Us Services Manufacturers Legal Notices Privacy