This mount extender for the 7500 Series arms from Innovative is a useful accessory for creating a sit/stand workstation where wall-mounting is impractical. It raises the mounting point of the 7500 arm by 14.0" without compromising any of the vertical or horizontal range of the arm. Both a Clamp Mount (CM) and a Through Mount (TM) are available in black (104) colour only.

NOTE: This extender arm does not include a 7500 or 7-Flex LCD arm (available separately).

NOTE: The Through Mount is the same style as the POS Innovative Arms in that you drill 4 screws into the mounting surface as opposed to a single central bolt. Bolt Mounting Pattern.

This efficiently designed pole arm allows lateral extension up to 16" (40.6 cm) along a 12" (30.5 cm) or 28" pole which mounts using the versatile Universal FLEXMount. A wide degree of monitor tilt is available (over 200 degrees), including the ability to rotate the monitor from landscape to portrait orientation. Cables are retained using clips on the underside of the arm, keeping them out of view and out of harm's way.

The Adjustable POS Countertop Mount from Innovative combines easy height adjustability with attractive design and durable construction for almost any retail environment. The monitor can be pivoted, turned, or locked into position for no movement. Cables are entirely hidden from view, passing through either the counter or the back exit of the mount. Weight capacity is 25 lbs or less.

The Long-reach Side-by-Side LCD Mount from Innovative Office Products allows you to position two monitors side by side, independently of each other, in any direction up to 17.5" from the pole. Reposition monitors with the touch of a finger, or adjust height along the pole as needed.

The Switch Dual Monitor Bracket Accessory facilitates a dual monitor mount on a Deluxe LCD Monitor Mount Arm. The two monitors can be oriented horizontally (side-by-side) or vertically (stacked one over the other). Includes Quick Release adapters for easy monitor attachment and removal. For full range of motion, see details of Innovative 7500-Wing Dual Monitor Arm.

The Medium Reach Lateral LCD Arm is identical to the 9130 except that it uses a shorter 'outer' arm, making the horizontal range only 14" instead of 16.5".

The Adjustable POS Through-Counter Mount from Innovative is a durable mounting system for monitors, signature capture devices, and kiosks. Ideal for retail use, the mount secures the monitor firmly to the counter and allows you to pivot and turn it to any desired angle - and lock it in position if necessary. The mount supports monitors up to 25 lbs in weight and has an adjustable height of 7" - 36" determined by the position of the tube (which runs through the counter in the mount). Also, it has internal cable routing, so that cables pass through the counter in the tube. The mounting mechanism is VESA-monitor compatible - 75 mm & 100 mm adapters included.

NOTE: The Through Mount requires you to drill 4 screws into the mounting surface as opposed to a single central bolt. Bolt Mounting Pattern (9189-24 + 9189-12 are Special Order)

The EVO Articulating Monitor Arm (3rd generation) is an award-winning arm designed by Innovative to complement any modern office. Installation is simple with a built-in tool-less desk-clamp, grommet or through-desk (sold separately) mechanism. The arm can easily be adjusted with minimal effort due to the spring counterbalance. The Better Balance Technology employed in the design of the arm gives steady and constant force to the arm throughout its range, addressing the usual variance in force that spring counterbalances exhibit. There is tension adjustment at all joints with a discrete cable management system built into the arm for reducing cable clutter. The monitor can also be rotated with the EVO into either portrait or landscape position.

Available in two colours, black or silver.

Experience the unique, practical and stylish EURO Series of LCD Arms. This LCD Arm features foldable arms which adjust vertically up and down a 12" pole (8" range of vertical adjustment). The arms can fold up to fit in about 3" of space and extend out 14". Various pole lengths and extensions are available or can be designed to fit any application you may be looking for. Unique cable management allows cables to be tucked under the forearm extensions. The Euro Series pole features eight notches at 1" increments which will provide a solid positive connection to position and secure the sliding adjustment clip. This clip prevents the arm extensions from sliding down, securely fastening the extension at the desired height.

Other features include:

• Rotates 360° at three joints
• Monitor tilter mechanism can tilt over 200°
• Adjustable tension at joints - ideal for touch-screen applications

The LCD/LCD TV Wall Mount from Innovative allows you to hang your flat panel on the wall to save maximum space. It is able to tilt up and down, as well as left to right, and can be extended by up to 4", 8.5", or 12" (with 4" and 8.5" extender arms, used singly or in combination). With adjustable tension at joints, the LCD Wall Mount is ideal for touch-screen applications and can support monitors up to 45 lbs. The Silver base mount (9110) is only available by special order and is more expensive than the black base mount.