Manufacturers

Ergotron

Search By:

Ergotron

< 1 2 3 >


WorkFit-S Single HD Sit-Stand Workstation

by Ergotron



The WorkFit-S clamps on to the front edge of your desk and uses the Ergotron's Constant Force spring lift mechanism to assist in moving the keyboard tray and monitor through the range of motion. The vertical adjustment range is 18", and the monitor ...



The WorkFit-S clamps on to the front edge of your desk and uses the Ergotron's Constant Force spring lift mechanism to assist in moving the keyboard tray and monitor through the range of motion. The vertical adjustment range is 18", and the monitor mount independently can vertically adjust an additional 5". The desk edge must be between .47" and 2.4" thick for the clamp to function, and the monitor must be between 16 and 28 lbs for the LCD pivot to function correctly. The keyboard tray is 16.5" wide x 9.3" deep, and the slide-out mousing surface is 7.5" wide x 7.9" deep, and the maximum weight on the keyboard surface cannot exceed 3 lbs.

NOTE: It is recommended to strengthen the mounting point to prevent damage to the desktop.






Models
Model #DescriptionPriceIn Stock?Buy Now
33-344-200WorkFit-S Single HD Sit-Stand Workstation NO 30 DAY CSG. SPECIAL ORDER ONLY. $785.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
97-897 Workfit-S Deep Keyboard Tray Accessory (27"W x 11"D x 0.25"H)$90.00 Yes
97-898 Workfit-S Deep Keyboard Tray Accessory for Corners, 27" W x 11" D x 0.25" H$90.00 Yes





WorkFit-S Dual Sit-Stand Workstation

by Ergotron



The WorkFit-S Dual Sit-Stand Workstation clamps on to the front edge of the desk and uses the Ergotron's Constant Force spring lift mechanism to assist in moving the keyboard tray and monitors through the range of motion. The vertical adjustment rang ...



The WorkFit-S Dual Sit-Stand Workstation clamps on to the front edge of the desk and uses the Ergotron's Constant Force spring lift mechanism to assist in moving the keyboard tray and monitors through the range of motion. The vertical adjustment range is 18", and the monitor mounts (in tandem) can independently vertically adjust an additional 5". The desk edge must be between .47" and 2.4" thick for the clamp to function, and the monitor must be between 6 and 14 lbs for each monitor for the LCD pivot to function correctly. In addition, the maximum width of each monitor cannot exceed 21.25" (for the LCDs to be able to mount on the Workfit). The keyboard tray is 16.5" wide x 9.3" deep, and the slide-out mousing surface is 7.5" wide x 7.9" deep, and the maximum weight on the keyboard surface cannot exceed 3 lbs.

Note: It is recommended to strengthen the mounting point to prevent damage to the desktop.






Models
Model #DescriptionPriceIn Stock?Buy Now
33-341-200WorkFit-S, Dual Sit-Stand Workstation NO 30 DAY CSG. SPECIAL ORDER ONLY. $730.00No
Accessories
Model #DescriptionPriceIn Stock?Buy Now
97-617 Ergotron Workfit Conversion Kit: Dual to LCD/Laptop NO 30 DAY CSG. SPECIAL ORDER ONLY. $92.50 Yes
97-897 Workfit-S Deep Keyboard Tray Accessory (27"W x 11"D x 0.25"H)$90.00 Yes
97-898 Workfit-S Deep Keyboard Tray Accessory for Corners, 27" W x 11" D x 0.25" H$90.00 Yes





WorkFit-S LCD & Laptop Sit-Stand Workstation

by Ergotron



The WorkFit-S LCD & Laptop Sit-Stand Workstation clamps on to the front edge of your desk and uses the Ergotron's Constant Force spring lift mechanism to assist in moving the keyboard tray and monitor through the range of motion. The vertical adjust ...



The WorkFit-S LCD & Laptop Sit-Stand Workstation clamps on to the front edge of your desk and uses the Ergotron's Constant Force spring lift mechanism to assist in moving the keyboard tray and monitor through the range of motion. The vertical adjustment range is 18", and the monitor mount independently can vertically adjust an additional 5". The desk edge must be between .47" and 2.4" thick for the clamp to function, the monitor must be between 6 and 14 lbs and the laptop between 6 and 10 lbs for the unit to function correctly. In addition, the maximum width of the monitor and laptop cannot exceed 21.25". The keyboard tray is 16.5" wide x 9.3" deep, and the slide-out mousing surface is 7.5" wide x 7.9" deep, and the maximum weight on the keyboard surface cannot exceed 3 lbs.

NOTE: It is recommended to strengthen the mounting point to prevent damage to the desktop.






Models
Model #DescriptionPriceIn Stock?Buy Now
33-340-200WorkFit-S LCD & Laptop Sit-Stand Workstation DISCONTINUED. $550.00No





WorkFit Floor Mat

by Ergotron



The WorkFit Floor Mat from Ergotron offers users a highly-cushioned standing surface ideal for use at sit-stand or standing workstations. The mat combines a medium density polyurethane core with a high tear strength outer membrane which is firmer to ...



The WorkFit Floor Mat from Ergotron offers users a highly-cushioned standing surface ideal for use at sit-stand or standing workstations. The mat combines a medium density polyurethane core with a high tear strength outer membrane which is firmer to the touch than the surface of some similar mats. The result is a mat with good cushioning abilities as well as a long-wearing surface. In addition, wide beveled edges reduce the potential for a tripping hazard.






Models
Model #DescriptionPriceIn Stock?Buy Now
97-620-060Polyurethane foam, Beveled Edges, 24" L x 36" W x .625" H, Black NO ETA. $330.00No





LX HD Wall Mount Swing Arm

by Ergotron



The LX HD Wall Mount Swing Arm from Ergotron is an easily adjustable wall mount arm for heavy monitors up to 50 lbs. Instead of just moving the monitor forward and back in a fixed position, this swing arm allows 360° rotation, 360° pan, and 2 ...



The LX HD Wall Mount Swing Arm from Ergotron is an easily adjustable wall mount arm for heavy monitors up to 50 lbs. Instead of just moving the monitor forward and back in a fixed position, this swing arm allows 360° rotation, 360° pan, and 20° tilting. The position of tilt can be locked into place with an included knob on the pivot. All hardware for mounting on a wood stud or concrete wall is included.






Models
Model #DescriptionPriceIn Stock?Buy Now
45-268-026Ergotron LX HD Wall Mount Swing Arm$140.00Yes





WorkFit-TLE Sit-Stand Desktop Workstation

by Ergotron



The WorkFit-TLE Sit-Stand Desktop Workstation from Ergotron features a "drop-down" keyboard tray to better accommodate the seated height requirements of users for whom the more common "above desk" retrofit solutions may not be suitable. It combines t ...



The WorkFit-TLE Sit-Stand Desktop Workstation from Ergotron features a "drop-down" keyboard tray to better accommodate the seated height requirements of users for whom the more common "above desk" retrofit solutions may not be suitable. It combines this with a large 23" D x 37.4" W work surface which includes a convenient integrated tablet/cell phone station with a removable tray cover. For additional convenience it also includes a detachable rear cable tray. The WorkFit-TLE moves directly up and down so a user is not forced to change position and step back from the desk. The dual releases ensure that accidental movement does not occur.

While at first glance the WorkFit-TLE may appear to offer great advantages over other desktop sit-stand retrofit products—because the tray is positioned below the mounting surface—users need to be aware that the distance below the desk surface is only 3.5". While this may work for a limited range of people, assuming a desk surface of 29" this will only position the keyboard tray down to 25.5". This means that it will actually be too high for users under 5'8". As well, because the tray is positioned below the desk surface the upper range is reduced, with the tray only able to rise 11.5" above the desk mounting surface, offering a suitable standing height for users only up to about 5'7".

The shallow depth of the keyboard tray, just 7.9", means that most ergonomic keyboards will not fit or will be limited in the range of adjustment that will be available to users. It also offers limited hand support for mousing, encouraging users to adopt usage modes that may greatly increase the risk of developing RSI.

Because the keyboard is positioned a full 8.5" below the monitor mounting surface users may find that their monitors are positioned too high for optimum viewing from a sitting position, especially if they happen to require multifocal eyewear. For standing purposes, even with the greater differential between the keyboard and the monitor mounting surfaces, most users will still require some kind of height adjustable monitor mount to further elevate the monitors.

Note: Users (above 5'10") may want to consider other options as the lower keyboard position will not provide the necessary range of keyboard height.






Models
Model #DescriptionPriceIn Stock?Buy Now
33-444-921WorkFit-TLE Sit-Stand Desktop Workstation SPECIAL ORDER ONLY. $680.00No





Interactive Arm HD

by Ergotron



The Interactive Arm - HD from Ergotron offers an extensive range of light-touch adjustment for TVs weighing from 18 to 40 pounds. This "Constant Force" arm has a 20" vertical adjustment range and can shift up to 17.5" to both left and right sides. It ...



The Interactive Arm - HD from Ergotron offers an extensive range of light-touch adjustment for TVs weighing from 18 to 40 pounds. This "Constant Force" arm has a 20" vertical adjustment range and can shift up to 17.5" to both left and right sides. It can extend up to 24" from the wall at maximum extension but still fold back to just 5.5". With Tilt and Pan functions this arm lets a TV be positioned to offer the perfect viewing experience, eliminating frustrating glare from lights or windows. This arm will fit TVs equipped with VESA mounts from 200x100 to 600x400. See this PDF for full specifications.






Models
Model #DescriptionPriceIn Stock?Buy Now
45-296-026Ergotron Interactive Arm HD$370.00Yes





Neo-Flex Desk Mount Tablet Arm

by Ergotron



The Neo-Flex Desk Mount Tablet Arm from Ergotron will elevate many tablets and e-Readers to a suitable ergonomic viewing height. With a full 8" of height adjustment it can be used to position the middle of the tablet from 8" to almost 17" above the m ...



The Neo-Flex Desk Mount Tablet Arm from Ergotron will elevate many tablets and e-Readers to a suitable ergonomic viewing height. With a full 8" of height adjustment it can be used to position the middle of the tablet from 8" to almost 17" above the mounting point for optimum viewing while working at a desk. The elevation adjustment "locks" to ensure that the tablet screen remains stable when touch contact is made. To enhance the viewing experience it also features tilt and pan adjustments to fine tune the position to eliminate potential for glare from lighting. The convenient adjustable bracket quickly adapts to the tablet size and control positions and works with a wide range of tablets and e-Readers. To ensure secure placement the cradle latches into place while still permitting easy removal and replacement of the tablet when mobility is required.

The Neo-Flex Desk Mount Tablet Arm can extend over 19" from the mounting point with the included extension or can be configured for an 11" reach without the extension where space is more limited.






Models
Model #DescriptionPriceIn Stock?Buy Now
45-306-101Neo-Flex Desk Mount Tablet Arm NO 30 DAY CSG. SPECIAL ORDER ONLY. CLEARANCE. $140.00Yes





LX Sit-Stand Wall Arm Monitor Mount

by Ergotron



The LX Sit-Stand Wall Arm Monitor Mount from Ergotron is an ideal solution for workstations that need to be accessed by a range of users. With a full 20" range of readily available height adjustment the LX Sit-Stand Mount is able to meet the varying ...



The LX Sit-Stand Wall Arm Monitor Mount from Ergotron is an ideal solution for workstations that need to be accessed by a range of users. With a full 20" range of readily available height adjustment the LX Sit-Stand Mount is able to meet the varying height requirements of the majority of users. In addition, the extended reach of 33" and the multiple articulating joints enable users to position the monitor in to reposition the monitor with just a touch (up, down, forward, and back), providing unparalleled range of motion. Because of the wide range of height adjustment and the ease of movement this monitor mount is a good candidate for locations where monitors will be viewed from a standing position.






Models
Model #DescriptionPriceIn Stock?Buy Now
45-353-026LX Sit-Stand Wall Arm Monitor Mount NO 30 DAY CSG. SPECIAL ORDER ONLY. CLEARANCE. $415.00Yes





Neo-Flex Extend LCD Arm

by Ergotron



The Neo-Flex Extend LCD Arm from Ergotron offers a full 9.5" of height adjustment and can be used to position the middle of the monitor anywhere from 9" to almost 18.5" above the mounting point. At maximum extension from the mount it can also reach a ...



The Neo-Flex Extend LCD Arm from Ergotron offers a full 9.5" of height adjustment and can be used to position the middle of the monitor anywhere from 9" to almost 18.5" above the mounting point. At maximum extension from the mount it can also reach a full 23". This is a pole-mount arm that requires manual adjustment along the 12" upright. The Extend LCD Arm is also modular which means that where space is limited it is possible to remove one or both of the extensions to reduce the extension reach. However, this is accomplished with an accompanying loss of both articulation range and elevation. Since the complete arm folds back to under 5" there really is no need to remove the extensions. Weight capacity is from 7 to 20 lbs.






Models
Model #DescriptionPriceIn Stock?Buy Now
45-235-194Neo-Flex Extend LCD Arm NO 30 DAY CSG. SPECIAL ORDER ONLY. CLEARANCE. $190.00Yes





< 1 2 3 >


About Us Services Manufacturers Legal Notices Privacy